About Threaded Studs and Rods
More
Ultra-Corrosion-Resistant Grade 2 Titanium Rods
- Yield Strength: 40,000 psi
- Hardness: Rockwell B65 (Medium)
- Temper Rating: Softened (Annealed)
- Specifications Met: ASTM B348
Because Grade 2 titanium is 99% pure, it is more corrosion resistant than Grades 5 and 9 but not as strong. It has good formability and weldability. Common uses include chemical processing equipment, heat exchangers, and marine hardware.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/16" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 1/8" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 3/16" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 1/4" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 5/16" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 3/8" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 7/16" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 1/2" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 5/8" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 3/4" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 7/8" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 1" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 1 1/4" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 1 1/2" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 1 3/4" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 2" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 2 1/4" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 | |||||
| 2 1/2" | -0.003" to 0.003" | 1/16" per 5 ft. | 00000000 |
Titanium Threaded Rods
Titanium threaded rods have a high strength-to-weight ratio and are resistant to acids and salt water. They're nonmagnetic.
For technical drawings and 3-D models, click on a part number.
| Lg., ft. | Tensile Strength, psi  | Hardness | Specifications Met | Each | |
Grade 2 Titanium | |||||
|---|---|---|---|---|---|
8-32 | |||||
| 1 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
| 3 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
10-24 | |||||
| 1 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 00000 |
| 3 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
1/4"-20 | |||||
| 1 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 00000 |
| 3 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
5/16"-18 | |||||
| 1 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 00000 |
| 3 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
3/8"-16 | |||||
| 1 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 00000 |
| 3 | 50,000 | Rockwell B80 | ASTM B348 | 000000000 | 000000 |
Dowel Pins
Use dowel pins as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. For a tight fit, your hole should be equal to or slightly smaller than the diameter shown. Breaking strength is measured as double shear, which is the force required to break a pin into three pieces.
400 nickel pins and grade 2 titanium pins resist salt water and caustic chemicals. Titanium pins are about as strong as steel pins, but 40% lighter. They are not magnetic.
For technical drawings and 3-D models, click on a part number.
| Lg. | Dia. Tolerance | Min. Hardness | Breaking Strength | Each | |
1/8" Dia. | |||||
|---|---|---|---|---|---|
| 1/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 000000 |
| 5/16" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
3/16" Dia. | |||||
| 3/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
1/4" Dia. | |||||
| 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 5/8" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 3/4" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 1 1/2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |
| 2" | 0.0001" to 0.0003" | Not Rated | Not Rated | 000000000 | 00000 |