Cleaned and double bagged in an ISO Class 5 (Fed. Std. Class 100) clean room, these screws are ready to use on chambers and components in high-vacuum systems.

These screws are hardened to be 40% stronger than standard 316 stainless steel screws, yet they still have excellent corrosion resistance. Use them in chemical and marine applications.

The standard for high-strength fastening.

Nearly as strong as steel, these stainless steel screws won’t rust in outdoor, washdown, and other corrosive environments. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces.

Made from alloy steel, these screws are nearly twice as strong as stainless steel low-profile screws. With a head height one-third the size of a standard socket head, they fit in the tightest spaces.

These screws have good chemical resistance. A thread locker bonded to the threads prevents loosening from vibration.

Drilled through the head and shaft, these screws vent fluid and gases trapped below the screw, making them good for vacuum applications.

A freely rotating washer distributes pressure over a wider area than a flange, preventing damage to your material's surface.

These general purpose flanged screws distribute pressure where the screw meets the surface, eliminating the need for a washer.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

Closely spaced threads on these screws fit in holes with a fine pitch. They're not compatible with standard metric threads.

Made from alloy steel, these screws are twice as strong as standard steel Torx flat head screws.

These metric A286 stainless steel screws have comparable strength to alloy steel with the corrosion resistance of 18-8 stainless steel.

With a tamper-resistant Torx or Torx Plus drive (also known as a pin-in Torx or Torx Plus drive), these screws are difficult to remove without special tools.

With a tamper-resistant hex drive (also known as a pin-in hex drive), these metric screws are difficult to remove without special tools.

These metric screws help prevent counterclockwise-moving parts from loosening. Use them for medium-strength fastening.

Choose these metric screws for high-strength fastening. Often used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems, these screws are at least 25% stronger than medium-strength steel screws.

Use these general purpose 18-8 stainless steel screws for a variety of fastening applications. They have good chemical resistance.

Choose these screws for their excellent corrosion resistance—comparable to 316 stainless steel—and the strength of steel. Use them for high-strength fastening in chemical and marine applications.

Made to Japanese Industrial Standards, these Class 10.9 steel screws can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are at least 25% stronger than medium-strength steel screws. The flange eliminates the need for a washer.

Made from 18-8 stainless steel, these screws have good chemical resistance. A flange under the head distributes pressure over the surface, eliminating the need for a washer.

Made from 18-8 stainless steel, these screws have good chemical resistance. Their flange is serrated to help prevent loosening from vibration.

Choose these metric screws for high-stress applications, such as valves, pumps, motors, and automotive suspension systems. They are about 10% stronger than medium-strength steel screws. Their serrated flange helps to resist vibration.

These screws have metric thread sizes. They are 18-8 stainless steel for good chemical resistance.

More corrosion resistant than 18-8 stainless steel shoulder screws, these have excellent resistance to chemicals and salt water. These screws have inch thread sizes.

Shoulder screws made of 17-4 PH stainless steel are nearly twice as strong as 18-8 stainless steel and have the same corrosion resistance. These screws have inch thread sizes.

The metric-sized threads on these screws are the same diameter as the shoulder. Comparable in strength to Class 12.9 steel.

With a reduced head size and an unthreaded shoulder, use these screws as a shaft or dowel pin for small rotating parts in low-clearance applications.

Screw these shoulders onto a stud.

More corrosion resistant than 18-8 stainless steel shoulder screws, these have excellent resistance to chemicals and salt water.

Tighten these shoulder screws by turning them to the left; once fastened, they resist loosening from counterclockwise motion.

With a shoulder that’s twice as precise as standard shoulder screws, these metric shoulder screws act as a shaft or axle for bearings and other moving parts in applications that require smooth and accurate movement, such as measuring and lab equipment. Made of 18-8 stainless steel, they’re nearly as strong as steel but won’t rust in outdoor or washdown environments.

Install and remove these shoulder screws by hand or with a hex key.

These metric 316 stainless steel shoulder screws are more corrosion resistant than 18-8 stainless steel shoulder screws. They also have excellent resistance to chemicals and salt water.

Without a head to get in the way, these screws fit in tight spaces where standard shoulder screws cannot. Either thread them in a countersunk hole for a flush mount, or install them with the shoulder sticking out to use them as pins or dowels for aligning and locating components.

316 stainless steel screws resist corrosion from chemicals and salt water better than 18-8 stainless steel screws. They may be mildly magnetic.

These metric alloy steel screws are nearly twice as strong as stainless steel button head screws.

The Torx or Torx-Plus drive on these metric screws have more points of contact than other drives, allowing you to tighten them without damaging the recess.

Add a decorative look when fastening parts—these metric screws have a painted head.

Made from 18-8 stainless steel, these metric screws have good chemical resistance and may be mildly magnetic. They have a flange that distributes pressure across a wide surface, eliminating the need for a separate washer.

With a flange comparable in size to a washer, these metric screws distribute pressure better than standard flanged screws. Made from 316 stainless steel, they have excellent resistance to chemicals and salt water. Screws may be mildly magnetic.

Made from 18-8 stainless steel, these metric button head screws have good chemical resistance and may be mildly magnetic. The tamper-resistant Torx drive (also known as a pin-in Torx drive) makes them difficult to remove without special tools.

Made from 18-8 stainless steel, these metric button head screws have good chemical resistance and may be mildly magnetic. The tamper-resistant hex drive (also known as a pin-in hex drive) makes them difficult to remove without special tools.

To vent fluid and gas trapped under the screw, these metric screws are drilled through the shaft. Made from 18-8 stainless steel, they have good chemical resistance and may be mildly magnetic.

These assortments include hex head screws and hex nuts.

Flat head screws are angled under the head to fit flush within countersunk holes.