McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    156 Products
    About Composites
    industrial info icon

    Compare our offering of composites to find the right material for you.

    High-Temperature Garolite G-11 Sheets and Bars

    Offering higher strength and better heat resistance than Garolite G-10/FR4, these Garolite G-11 sheets and bars are suitable for continuous use in elevated temperatures. They retain at least 50% of their structural strength at temperatures above 300° F. Made of an epoxy resin with fiberglass fabric reinforcement, Garolite G-11 is sometimes called epoxy-grade industrial laminate and phenolic.
    Sheet
    Image of Product. Front orientation. Contains MultipleImages. Garolite. High-Temperature Garolite G-11 Sheets and Bars.
    Temp.
    6" × 6"
    12" × 12"
    12" × 24"
    24" × 24"
    24" × 36"
    36" × 48"
    Min.
    Max.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Flammability
    Rating
    Each
    Each
    Each
    Each
    Each
    Each
    1/32" Thick (-0.005" to 0.005")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		———08710K1130000008710K1140000008710K1150000008710K1160000008710K117000000
     
    1/16" Thick (-0.0075" to 0.0075")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		———08710K121000008710K141000008710K161000008710K181000008710K211000000
     
    1/8" Thick (-0.012" to 0.012")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		8710K5370000008710K122000008710K142000008710K1620000008710K1820000008710K212000000
     
    3/16" Thick (-0.019" to 0.019")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		8710K331000008710K123000008710K143000008710K1630000008710K1830000008710K213000000
     
    1/4" Thick (-0.022" to 0.022")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		8710K332000008710K124000008710K1440000008710K1640000008710K1840000008710K214000000
     
    5/16" Thick (-0.026" to 0.026")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		8710K538000008710K125000008710K1450000008710K1650000008710K1850000008710K215000000
     
    3/8" Thick (-0.03" to 0.03")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		8710K333000008710K126000008710K1460000008710K1660000008710K1860000008710K216000000
     
    1/2" Thick (-0.036" to 0.036")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		8710K334000008710K1270000008710K1470000008710K1670000008710K1870000008710K217000000
     
    3/4" Thick (-0.043" to 0.043")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		8710K335000008710K1330000008710K1340000008710K1350000008710K1360000008710K13700000000
     
    1" Thick (-0.049" to 0.049")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		8710K3360000008710K1530000008710K1540000008710K155000000———0———0
     
    Bar
    Image of Product. Front orientation. Contains MultipleImages. Garolite. High-Temperature Garolite G-11 Sheets and Bars.
    Temp.
    1" × 24"
    1" × 48"
    1 1/2" × 24"
    1 1/2" × 48"
    2" × 24"
    2" × 48"
    Min.
    Max.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Flammability
    Rating
    Each
    Each
    Each
    Each
    Each
    Each
    1/8" Thick (-0.012" to 0.012")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		5346N1110000005346N1120000005346N1210000005346N1220000005346N1310000005346N132000000
     
    1/4" Thick (-0.022" to 0.022")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		5346N141000005346N142000005346N151000005346N152000005346N161000005346N16200000
     
    1/2" Thick (-0.036" to 0.036")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		5346N171000005346N172000005346N181000005346N1820000005346N191000005346N192000000
     
    3/4" Thick (-0.043" to 0.043")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		5346N211000005346N2120000005346N221000005346N2220000005346N2310000005346N232000000
     
    1" Thick (-0.049" to 0.049")
     
    Green
    Not Rated33541,900 to 58,6008.4 to 15.3Not RatedNoMIL-I-24768/3UL 94 HB
    		5346N241000005346N2420000005346N2510000005346N2520000005346N2610000005346N262000000
     

    Flame-Retardant High-Temperature Garolite G-11/FR5 Sheets

    Image of Product. Front orientation. Garolite. Flame-Retardant High-Temperature Garolite G-11/FR5 Sheets.
    Often used for terminal boards, electrical housings, end plates, and structural components in high temperatures, these sheets are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4. They keep at least 50% of their structural strength at temperatures above 300° F. These sheets are made of a flame-retardant epoxy resin that is reinforced with fiberglass fabric.
    Garolite G-11/FR5 is also known as epoxy fiberglass, epoxy-grade industrial laminate, and phenolic.
    Temp.
    6" × 6"
    12" × 12"
    12" × 24"
    24" × 24"
    24" × 36"
    Min.
    Max.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Mil. Spec.
    Each
    Each
    Each
    Each
    Each
    1/16" Thick (-0.008" to 0.008")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/285076N110000005076N120000005076N130000005076N140000005076N150000000
     
    1/8" Thick (-0.012" to 0.012")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/285076N16000005076N17000005076N18000005076N190000005076N21000000
     
    3/16" Thick (-0.019" to 0.019")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/285076N22000005076N23000005076N24000005076N250000005076N26000000
     
    1/4" Thick (-0.022" to 0.022")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/285076N27000005076N28000005076N290000005076N310000005076N32000000
     
    5/16" Thick (-0.026" to 0.026")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/285076N33000005076N34000005076N350000005076N360000005076N37000000
     
    3/8" Thick (-0.03" to 0.03")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/285076N38000005076N39000005076N410000005076N420000005076N43000000
     
    1/2" Thick (-0.036" to 0.036")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/285076N44000005076N450000005076N460000005076N470000005076N48000000
     
    1" Thick (-0.049" to 0.049")
     
    Yellow
    Not Rated35535,00010Rockwell M115
    (Extra Hard)    		NoMIL-I-24768/285076N490000005076N510000005076N520000005076N530000005076N5400000000
     

    Static-Dissipative Multipurpose Flame-Retardant G-11/FR5 Garolite Sheets

    Image of Product. Front orientation. Garolite. Static-Dissipative Multipurpose Flame-Retardant G-11/FR5 Garolite Sheets.
    Offering higher strength and better heat resistance than Garolite G-10/FR4, these Garolite G-11/FR 5 sheets are suitable for continuous use in elevated temperatures. With a black coating that reduces static electricity, these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment. The coating is cured, so it won’t chip or peel off. These sheets are made of flame-resistant epoxy resin and are easier to machine than other glass-cloth phenolics. A fiberglass fabric reinforcement keeps them from breaking or cracking when bent. Sheets vary in shade from yellow-brown to light green.
    12" × 12"
    12" × 24"
    24" × 24"
    24" × 36"
    36" × 48"
    48" × 96"
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Hardness
    For Use
    Outdoors
    Flammability
    Rating
    Each
    Each
    Each
    Each
    Each
    Each
    1/16" Thick (-0.008" to 0.008")
     
    Yellow
    35035,000 to 50,0005.5 to 12Rockwell M110
    (Extra Hard)    		NoUL 94 V-0
    		4440N2110000004440N2120000004440N2130000004440N21400000004440N21500000004440N2160000000
     
    3/16" Thick (-0.019" to 0.019")
     
    Yellow
    35035,000 to 50,0005.5 to 12Rockwell M110
    (Extra Hard)    		NoUL 94 V-0
    		4440N221000004440N222000004440N2230000004440N2240000004440N2250000004440N22600000000
     
    1/4" Thick (-0.022" to 0.022")
     
    Yellow
    35035,000 to 50,0005.5 to 12Rockwell M110
    (Extra Hard)    		NoUL 94 V-0
    		4440N231000004440N2320000004440N2330000004440N2340000004440N2350000004440N23600000000
     
    3/8" Thick (-0.03" to 0.03")
     
    Yellow
    35035,000 to 50,0005.5 to 12Rockwell M110
    (Extra Hard)    		NoUL 94 V-0
    		4440N241000004440N2420000004440N2430000004440N2440000004440N2450000004440N24600000000
     
    1/2" Thick (-0.036" to 0.036")
     
    Yellow
    35035,000 to 50,0005.5 to 12Rockwell M110
    (Extra Hard)    		NoUL 94 V-0
    		4440N2510000004440N2520000004440N2530000004440N2540000004440N255000000004440N25600000000
     
    back to top