Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
9460 and E-20NS are nonsagging, so they won't drip from vertical or overhead surfaces. 9460 bonds dissimilar materials.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 9460 | 1.69 fl. oz. | Cartridge | 50 min. | 72 hrs. | 3,500 | 30 | 1:1 | Paste (200,000 cP) | -65° to 250° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 00000000 | 000000 |
| 9460 | 2.5 gal. | Can | 50 min. | 72 hrs. | 3,500 | 30 | 1:1 | Paste (200,000 cP) | -65° to 250° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 00000000 | 000000 |
| 9460 | 6.76 fl. oz. | Cartridge | 50 min. | 72 hrs. | 3,500 | 30 | 1:1 | Paste (200,000 cP) | -65° to 250° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 00000000 | 00000 |
| Each | ||
| Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. Loctite® Cartridges | 0000000 | 00000 |
| Mixer Nozzle for 1.69 fl. oz. Cartridges | 00000000 | 0000 |
| Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges | 000000000 | 000000 |
| Dispensing Gun for 1.69 fl. oz. Cartridges | 00000000 | 00000 |
| Dispensing Gun for 6.76 fl. oz. Loctite® Cartridges | 0000000 | 000000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
HY4090 is a blend of epoxy and instant-bond adhesive for a balance of strength, cure speed, and temperature resistance.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| HY4090 | 1.69 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Gray | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 000000 |
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
E-40FL and E-90FL bond dissimilar materials.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| E-40FL | 1.69 | Cartridge | 40 min. | 24 hrs. | 640 | Not Rated | 1:1 | Thick Liquid (70,000 cP) | -25° to 250° | Gray | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass | 0000000 | 000000 |
| E-90FL | 1.69 | Cartridge | 90 min. | 24 hrs. | 810 | Not Rated | 1:1 | Thick Liquid (40,000 cP) | -25° to 250° | Gray | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Glass, Rubber to Masonry, Ceramic, Glass, Masonry, Wood, Wood to Glass | 0000000 | 00000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts.
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
| 9340 | 2.7 | Tube | 90 min. | 24 hrs. | 2,300 | Not Rated | 1:1 | Paste (Not Rated) | -65° to 180° | Metal, Plastic, Rubber | 00000000 | 000000 |
Acrylic Structural Adhesives
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
The size listed is the combined total of the two parts. Use a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
H4500 works especially well on metals.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||||
| H4500 | 1.69 | Cartridge | 15 min. | 72 hrs. | 3,100 | 58 | 10:1 | Thick Liquid (14,380 cP) | -40° to 210° | Gray | Metal, Plastic | 0000000 | 000000 |
Structural Sealants
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Loctite® Hybrid Polymer | ||||||||||||
| 5510 | 10.1 | Cartridge | 24 hrs. | 7 days | 140% | Not Rated | Medium Soft (Durometer 44A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Plastic to Composites Rubber Rubber to Composites Composites Masonry Wood | Gray | 00000000 | 000000 |
High-Strength Self-Leveling Concrete Joint Sealants
Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Mix Ratio | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Loctite® Polyurethane | |||||||||||||||
| PC 6231 | 8.6 | Cartridge | 3 min. | 90 min. | 1:1 | 82% | -10% to 10% | Hard (Durometer 75A) | 3/4" | 2 1/4" | -40° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Gray | 0000000 | 000000 |
Surface Fillers for Metal
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
Loctite® Fixmaster Aluminum Liquid and Loctite® Fixmaster Aluminum Putty form a nonrusting finish.
Loctite EA 3471 and PC2 35642 have stronger adhesion than any other surface fillers we offer.
Use Loctite® Fixmaster Steel Epoxy with a dispensing gun and mixer nozzle to mix as you dispense.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Aluminum Liquid | ||||||||||||||
| PC 3466 | __ | 1 lbs. | Jar, Can | 20 | 24 | Thick Liquid | 5:1 | 60 sq. in. @ 1/4" | -20° to 200° | Gray | Machine, Drill, Tap | Aluminum | 0000000 | 0000000 |
Loctite® Fixmaster Aluminum Putty | ||||||||||||||
| PC 7254 | __ | 1 lbs. | Jar | 20 | 24 | Paste | 4:1 | 70 sq. in. @ 1/4" | -20° to 200° | Gray | Machine, Drill, Tap | Aluminum | 0000000 | 000000 |
Loctite® Fixmaster Steel Putty | ||||||||||||||
| EA 3471 | __ | 1 lbs. | Jar | 30 | 24 | Thick Liquid | 2.5:1 | 40 sq. in. @ 1/4" | -20° to 220° | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 00000 |
| EA 3473 | __ | 1 lbs. | Jar | 3 | 24 | Paste | 1:1 | 50 sq. in. @ 1/4" | -20° to 190° | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 00000 |
| PC 235642 | __ | 4 lbs. | Can | 30 | 24 | Paste | 2.5:1 | 170 sq. in. @ 1/4" | -20° to 220° | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 000000 |
Loctite® Fixmaster Steel Epoxy | ||||||||||||||
| PC 3965 | 1.7 fl. oz. | __ | Cartridge | 3 | 7 | Paste | 1:1 | 57 sq. in. @ 1/4" | -20° to 200° | Gray | Machine, Drill, Sand, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 000000 | 00000 |
Loctite® Fixmaster Stainless Steel Putty | ||||||||||||||
| EA 3476 | __ | 1 lbs. | Jar | 20 | 24 | Paste | 4:1 | 30 sq. in. @ 1/4" | -20° to 220° | Gray | Machine, Drill, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron | 0000000 | 000000 |
Fine-Particle Abrasion-Resistant Surface Fillers for Metal
For use in processing equipment that carries particles smaller than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings. The size listed is the combined total of the two parts.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Wear Resistant Putty | |||||||||||||||
| PC 7222 | 1 | Jar | 30 | 24 | Putty | 2:1 | 50 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Loctite® Nordbak Pneu-Wear | |||||||||||||||
| PC 7317 | 3 | Can | 30 | 6 | Paste | 4:1 | 150 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |
| PC 7317 | 25 | Pail, Can | 30 | 6 | Paste | 4:1 | 1,240 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 00000000 |
Large-Particle Abrasion-Resistant Surface Fillers for Metal
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers. The size listed is the combined total of the two parts.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak Wearing Compound | ||||||||||||||
| PC 7218 | 5 | Jar, Can | 30 | 7 | Paste | 2:1 | 260 sq. in. @ 1/4" | 1/4" | -15° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 0000000 |
| PC 7218 | 25 | Pail, Can | 30 | 7 | Paste | 2:1 | 1,240 sq. in. @ 1/4" | 1/4" | -15° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 000000 | 000000 |
| PC 7357 | 6 | Jar, Can | 25 | 8 | Paste | 2:1 | 310 sq. in. @ 1/4" | 1/4" | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000 |
Impact-Resistant Surface Fillers for Metal
These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders. The size listed is the combined total of the two parts.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Nordbak High Impact Wearing Compound | |||||||||||||||
| PC 9313 | 25 | Pail, Can | 30 | 6 | Paste | 2:1 | 1,240 sq. in. @ 1/4" | 1/4" | Yes | -20° to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 000000000 |
High-Temperature Surface Fillers for Metal
Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F. Fillers that have a mix ratio are multi-part fillers. The size listed is the combined total of the parts.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength, hrs. | Consistency | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster 2000° Putty | ||||||||||||
| MR 2000 | 8 | Can | 30 min. | 7 | Putty | 30 sq. in. @ 1/4" | Not Rated to 2000° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Chemical-Resistant Surface Fillers for Metal
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Superior Metal | |||||||||||||||
| EA 3478 | 1 | Jar | 20 | 24 hrs. | Paste | 4:1 | 30 sq. in. @ 1/4" | 1" | Yes | -20° to 250° | Gray | Machine, Drill | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 0000000 | 0000000 |
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Pkg. Qty. | Pkg. | |
Loctite® Fixmaster Epoxy | ||||||||||||||
| EA 445 | 0.12 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
| EA 445 | 1 oz. | Mixer Cup | 5 | 12 hrs. | Thick Liquid | 1:1 | 1 sq. in. @ 1/4" | -65° to 180° | Gray | Machine, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood | 10 | 0000000 | 000000 |
Pourable Surface Fillers
Make castings and fill voids with these two-part pourable epoxies. The size listed is the combined total of the two parts.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Loctite® Fixmaster Steel Liquid | |||||||||||||||
| EA 3472 | 1 | Can | 25 | 24 | Thick Liquid | 4:1 | 50 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Machine, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | 0000000 | 0000000 |
| EA 3472 | 4 | Can | 25 | 24 | Thick Liquid | 4:1 | 200 sq. in. @ 1/4" | 1" | Yes | -20° to 220° | Gray | Machine, Tap | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | 0000000 | 000000 |
Water-Resistant Surface Fillers
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Approx. Coverage @ Thick. | Max. Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Specifications Met | Each | |
Loctite® Fixmaster Metal Magic Steel | ||||||||||||||
| EA 3463 | 4 | Stick | 3 | 24 hrs. | Putty | 10 sq. in. @ 1/4" | 1" | -20° to 250° | Gray | Sand | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | NSF/ANSI 61 | 0000000 | 000000 |
Rigid Oil-Resistant Gasket Maker Sealants
Form dense, rigid gaskets that won’t degrade in the presence of oil. Because they’re rigid, they stand up to vibration and high-torque applications. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal and make it easy to form irregular-shaped gaskets. They are RTV (room temperature vulcanizing).
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer Model Number | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Loctite® Gasket Maker Sealants | ||||||||||
| 5699 | 2.36 | Tube | 0.25" | 30 | 24 | -60° to 400° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 00000000 | 000000 |
Rigid Oil-Resistant Gasket Maker Sealants in Nozzle-Top Cans
Press the nozzle to dispense a uniform bead. These gasket makers create dense, rigid gaskets that withstand vibration and high-torque applications and won’t degrade from oil. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal. They make it easy to create irregular-shaped gaskets. These gasket makers are RTV (room temperature vulcanizing).
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Manufacturer Model Number | Container Size, fl. oz. | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Flexibility | Each | |
Loctite® Gasket Maker Sealants | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 5699 | 6.4 | 0.25" | 30 | 24 | -60° to 400° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | Rigid | 00000000 | 000000 |
Rigid Oil-Resistant Gasket Maker Sealants in Cartridges
With a standard caulk gun, quickly and easily make dense, rigid gaskets that won’t degrade from oil. Since they're rigid, they stand up to vibration and high-torque applications. Gasket makers are used in place of rubber, cork, and other traditional gasket materials for a form-in-place seal. They make it easy to create irregular-shaped gaskets. All are RTV (room temperature vulcanizing).
| Manufacturer Model Number | Container Size, fl. oz. | Max. Gap Size Filled | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Loctite® Gasket Maker Sealants | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 5699 | 10.1 | 0.25" | 30 | 24 | -60° to 400° | Gray | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium | 00000000 | 000000 |
Low-Friction Epoxy Coatings
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within. These thick coatings can also be used in chutes and on foundations for a smooth, glossy surface that resists abrasion, chemicals, and extreme temperatures once cured. Apply with a brush or roller. The size listed is the combined total of the two parts.
Dry Time | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model Name | Mfr. Model No. | Container Size, gal. | Composition | Touch, hrs. | O'all, hrs. | Approximate Coverage @ Thickness | Application Time After Mixing, min. | Application Temp. Range, °F | For Use On | Color (Appearance) | Each | |
Loctite® Coatings | ||||||||||||
| Nordbak Chemical Resistant Coating | PC 7319 | 1 1/2 | Solvent Based | 4 | 16 | 150 sq. ft. @ 10 mil | 25 | 65° to 80° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Composites, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Gray (Gloss) | 000000 | 0000000 |