Grease Fitting Ball Joints

Filter by

Shank Gender

Female

Male

System of Measurement

Shank Thread Size

Rod End Type

Shank Thread Direction

Material

Lubrication

Thread Size

Thread Direction

Overall Thickness

Shank Center Length

Maximum Ball Swivel

Shank Thread Length

Overall Width

Static Radial Load Capacity

Less than 2,000 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. or greater

Not Rated

Relubrication

Required

Not Required

Ball Stud Thread Size

Shank Thread Pitch

Gender

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

RoHS

Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Finish

122 Products

Ball Joint Rod Ends with Grease Fitting

Connect your grease gun to the fitting to lubricate. Made of steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints with Grease Fitting



		3/8"-24	1 15/16"	1 1/4"	3/8"	22°	1"	1/2"	3,500	Carbon Steel	Right Hand, Left Hand	4444T1	00000


		7/16"-20	2 1/8"	1 3/8"	7/16"	21°	1 1/8"	9/16"	4,450	Carbon Steel	Right Hand, Left Hand	4444T2	0000
		1/2"-20	2 7/16"	1 1/2"	1/2"	20°	1 5/16"	5/8"	5,850	Carbon Steel	Right Hand, Left Hand	4444T3	0000
		5/8"-18	2 5/8"	1 5/8"	5/8"	26°	1 1/2"	3/4"	6,850	Carbon Steel	Right Hand, Left Hand	4444T4	00000
		3/4"-16	2 7/8"	1 3/4"	3/4"	24°	1 3/4"	7/8"	9,400	Carbon Steel	Right Hand, Left Hand	4444T5	00000
		1"-12	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	37,000	Carbon Steel	Right Hand, Left Hand	4444T6	00000
		1"-14	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	37,000	Carbon Steel	Right Hand, Left Hand	4444T7	00000
		M10 × 1.25 mm	48 mm	29 mm	10 mm	26°	27 mm	14 mm	4,700	Carbon Steel	Right Hand, Left Hand	4444T16	00000
		M10 × 1.5 mm	48 mm	29 mm	10 mm	26°	27 mm	14 mm	4,700	Carbon Steel	Right Hand, Left Hand	4444T11	00000
		M12 × 1.25 mm	54 mm	33 mm	12 mm	27°	30 mm	16 mm	5,800	Carbon Steel	Right Hand, Left Hand	4444T17	00000
		M12 × 1.75 mm	54 mm	33 mm	12 mm	27°	30 mm	16 mm	5,800	Carbon Steel	Right Hand, Left Hand	4444T12	00000


		M14 × 2 mm	60 mm	36 mm	14 mm	30°	34.8 mm	19 mm	7,900	Carbon Steel	Right Hand, Left Hand	4444T13	00000
		M16 × 2 mm	66 mm	40 mm	16 mm	33°	38 mm	21 mm	8,400	Carbon Steel	Right Hand, Left Hand	4444T14	00000
		M18 × 1.5 mm	72 mm	44 mm	18 mm	30°	42 mm	23 mm	10,750	Carbon Steel	Right Hand, Left Hand	4444T18	00000
		M20 × 1.5 mm	78 mm	47 mm	20 mm	29°	46 mm	25 mm	12,800	Carbon Steel	Right Hand, Left Hand	4444T15	00000

Internally Threaded Ball Joint Rod Ends with Grease Fitting

Connect your grease gun to the fitting to lubricate. These rod ends don’t come lubricated, so you'll need to lubricate during installation and on an ongoing basis. Made of steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints with Grease Fitting



		3/8"-24	1 5/8"	13/16"	3/8"	22°	1"	1/2"	5,100	Carbon Steel	Right Hand, Left Hand	4444T21	00000


		7/16"-20	1 13/16"	15/16"	7/16"	21°	1 1/8"	9/16"	6,400	Carbon Steel	Right Hand, Left Hand	4444T22	0000
		1/2"-20	2 1/8"	1 1/16"	1/2"	20°	1 5/16"	5/8"	9,100	Carbon Steel	Right Hand, Left Hand	4444T23	0000
		5/8"-18	2 1/2"	1 3/8"	5/8"	26°	1 1/2"	3/4"	9,800	Carbon Steel	Right Hand, Left Hand	4444T24	00000
		3/4"-16	2 7/8"	1 9/16"	3/4"	24°	1 3/4"	7/8"	14,250	Carbon Steel	Right Hand, Left Hand	4444T25	00000
		1"-12	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,500	Carbon Steel	Right Hand, Left Hand	4444T26	00000
		1"-14	4 1/8"	2 1/8"	1"	17°	2 3/4"	1 3/8"	43,500	Carbon Steel	Right Hand, Left Hand	4444T27	00000
		M6 × 1 mm	30 mm	14 mm	6 mm	23°	19 mm	9 mm	2,650	Carbon Steel	Right Hand, Left Hand	6536N1	0000
		M8 × 1.25 mm	36 mm	17 mm	8 mm	28°	22.3 mm	12 mm	3,400	Carbon Steel	Right Hand, Left Hand	6536N2	0000
		M10 × 1.5 mm	43 mm	21 mm	10 mm	26°	27 mm	14 mm	5,100	Carbon Steel	Right Hand, Left Hand	6536N3	00000
		M12 × 1.75 mm	50 mm	24 mm	12 mm	27°	30 mm	16 mm	5,800	Carbon Steel	Right Hand, Left Hand	6536N4	00000


		M14 × 2 mm	57 mm	27 mm	14 mm	30°	34.8 mm	19 mm	7,900	Carbon Steel	Right Hand, Left Hand	6536N5	00000
		M16 × 2 mm	64 mm	33 mm	16 mm	33°	38 mm	21 mm	8,400	Carbon Steel	Right Hand, Left Hand	6536N6	00000
		M20 × 1.5 mm	77 mm	40 mm	20 mm	29°	46 mm	25 mm	12,800	Carbon Steel	Right Hand, Left Hand	6536N7	00000

Internally Threaded Oil-Embedded Ball Joint Linkages

An oil-embedded bronze insert slowly releases lubricant to the rod end. Linkages consist of ball joint rod ends with a ball stud attached to simplify mounting. The stud is machined to fit perfectly inside its housing and swivel in all directions—good for clutches, throttles, and shift control rods. Maximum ball swivel is approximate. Periodic relubrication is needed.

Ball Joint Linkages

	Shank			Ball Stud							Right-Hand Threaded Ball Stud		Left-Hand Threaded Ball Stud
	Thread Size	Ctr. Lg.	Thread Lg.	Thread Size	Ctr. Lg.	Lg.	Max. Ball Swivel	Static Radial Load Cap.	Material	Lubrication		Each		Each
Right-Hand Shank Thread



		10-32	1 1/16"	1/2"	10-32	1 1/64"	1/2"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K35	00000	6072K352	00000


		1/4"-28	1 5/16"	11/16"	1/4"-28	1 1/32"	9/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K31	0000	6072K312	0000
		5/16"-24	1 3/8"	11/16"	5/16"-24	1 7/32"	11/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K32	0000	6072K322	0000
		3/8"-24	1 5/8"	13/16"	3/8"-24	1 9/16"	29/32"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K33	0000	6072K332	0000
		7/16"-20	1 13/16"	15/16"	7/16"-20	1 3/4"	1 1/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K36	00000	———	0
		1/2"-20	2 1/8"	1 1/16"	1/2"-20	2"	1 1/8"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K34	00000	———	0
		5/8"-18	2 1/2"	1 3/8"	5/8"-18	2 1/2"	1 1/2"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K37	00000	———	0
		3/4"-16	2 7/8"	1 9/16"	3/4"-16	3"	1 13/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K38	00000	———	0


		Left-Hand Shank Thread



				10-32	1 1/16"	1/2"	10-32	1 1/64"	1/2"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K351	0000	———	0


				1/4"-28	1 5/16"	11/16"	1/4"-28	1 1/32"	9/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K311	0000	6072K313	0000
				5/16"-24	1 3/8"	11/16"	5/16"-24	1 7/32"	11/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K321	0000	6072K323	0000
				3/8"-24	1 5/8"	13/16"	3/8"-24	1 9/16"	29/32"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K331	0000	———	0
				7/16"-20	1 13/16"	15/16"	7/16"-20	1 3/4"	1 1/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K361	00000	———	0
				1/2"-20	2 1/8"	1 1/16"	1/2"-20	2"	1 1/8"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K341	00000	6072K343	00000
				5/8"-18	2 1/2"	1 3/8"	5/8"-18	2 1/2"	1 1/2"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K371	00000	———	0
				3/4"-16	2 7/8"	1 9/16"	3/4"-16	3"	1 13/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K381	00000	———	0

Internally Threaded Oil-Embedded Ball Joint Rod Ends

An oil-embedded bronze insert slowly releases lubricant throughout the life of the rod end. These rod ends will require ongoing lubrication. Made of zinc-plated steel, they generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		10-32	1 1/16"	1/2"	3/16"	13°	5/8"	5/16"	1,600	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K144	00000


		1/4"-28	1 5/16"	11/16"	1/4"	16°	3/4"	3/8"	2,500	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K154	0000
		5/16"-24	1 3/8"	11/16"	5/16"	14°	7/8"	7/16"	3,200	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K164	0000
		3/8"-24	1 5/8"	13/16"	3/8"	12°	1"	1/2"	3,950	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K174	0000
		7/16"-20	1 13/16"	15/16"	7/16"	14°	1 1/8"	9/16"	4,300	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K184	0000
		1/2"-20	2 1/8"	1 1/16"	1/2"	12°	1 5/16"	5/8"	6,700	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K212	00000
		5/8"-18	2 1/2"	1 3/8"	5/8"	16°	1 1/2"	3/4"	7,400	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K222	00000
		3/4"-16	2 7/8"	1 9/16"	3/4"	14°	1 3/4"	7/8"	11,550	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K58	00000

Internally Threaded Ball Joint Linkages with Grease Fitting

Along with superior wear resistance, these linkages have a grease fitting for easy lubrication. They consist of ball joint rod ends with a ball stud attached to simplify mounting. The stud is machined to fit perfectly inside its housing and swivel in all directions—good for clutches, throttles, and shift control rods. These linkages don't come lubricated, so you'll need to lubricate during installation and on an ongoing basis.

Ball Joint Linkages

	Shank			Ball Stud							Right-Hand Threaded Ball Stud		Left-Hand Threaded Ball Stud
	Thread Size	Ctr. Lg.	Thread Lg.	Thread Size	Ctr. Lg.	Lg.	Max. Ball Swivel	Static Radial Load Cap.	Material	Lubrication		Each		Each
Right-Hand Shank Thread



		1/4"-28	1 5/16"	11/16"	1/4"-28	1 1/32"	9/16"	40°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T911	00000	———	0


		5/16"-24	1 3/8"	11/16"	5/16"-24	1 7/32"	11/16"	42°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T921	0000	———	0
		3/8"-24	1 5/8"	13/16"	3/8"-24	1 9/16"	29/32"	46°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T931	0000	4444T933	00000
		7/16"-20	1 13/16"	15/16"	7/16"-20	1 3/4"	1 1/16"	44°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T941	00000	———	0
		1/2"-20	2 1/8"	1 1/16"	1/2"-20	2"	1 1/8"	48°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T951	00000	4444T953	00000
		5/8"-18	2 1/2"	1 3/8"	5/8"-18	2 1/2"	1 1/2"	52°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T961	00000	———	0
		3/4"-16	2 7/8"	1 9/16"	3/4"-16	3"	1 13/16"	46°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T971	00000	———	0


		Left-Hand Shank Thread



				5/16"-24	1 3/8"	11/16"	5/16"-24	1 7/32"	11/16"	42°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T922	0000	———	0


				3/8"-24	1 5/8"	13/16"	3/8"-24	1 9/16"	29/32"	46°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T932	0000	———	0
				1/2"-20	2 1/8"	1 1/16"	1/2"-20	2"	1 1/8"	48°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T952	00000	4444T954	00000
				5/8"-18	2 1/2"	1 3/8"	5/8"-18	2 1/2"	1 1/2"	52°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T962	00000	———	0
				3/4"-16	2 7/8"	1 9/16"	3/4"-16	3"	1 13/16"	46°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T972	00000	———	0

Ball Joint Linkages with Grease Fitting

Along with superior wear resistance, these linkages have a grease fitting for easy lubrication. They consist of ball joint rod ends with a ball stud attached to simplify mounting. The stud is machined to fit perfectly inside its housing and swivel in all directions—good for clutches, throttles, and shift control rods. They don’t come lubricated, so you’ll need to lubricate them during installation and on an ongoing basis.

Ball Joint Linkages

	Shank			Ball Stud							Right-Hand Threaded Ball Stud		Left-Hand Threaded Ball Stud
	Thread Size	Ctr. Lg.	Thread Lg.	Thread Size	Ctr. Lg.	Lg.	Max. Ball Swivel	Static Radial Load Cap.	Material	Lubrication		Each		Each
Right-Hand Shank Thread



		3/8"-24	1 15/16"	1 1/4"	3/8"-24	1 9/16"	29/32"	46°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T811	00000	4444T813	00000


		7/16"-20	2 1/8"	1 3/8"	7/16"-20	1 3/4"	1 1/16"	44°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T821	00000	———	0
		1/2"-20	2 7/16"	1 1/2"	1/2"-20	2"	1 1/8"	48°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T831	00000	4444T833	00000
		5/8"-18	2 5/8"	1 5/8"	5/8"-18	2 1/2"	1 1/2"	52°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T841	00000	———	0
		3/4"-16	2 7/8"	1 3/4"	3/4"-16	3"	1 13/16"	46°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T851	00000	———	0


		Left-Hand Shank Thread



				3/8"-24	1 15/16"	1 1/4"	3/8"-24	1 9/16"	29/32"	46°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T812	0000	———	0


				7/16"-20	2 1/8"	1 3/8"	7/16"-20	1 3/4"	1 1/16"	44°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T822	00000	———	0
				1/2"-20	2 7/16"	1 1/2"	1/2"-20	2"	1 1/8"	48°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T832	00000	4444T834	00000
				5/8"-18	2 5/8"	1 5/8"	5/8"-18	2 1/2"	1 1/2"	52°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T842	00000	———	0
				3/4"-16	2 7/8"	1 3/4"	3/4"-16	3"	1 13/16"	46°	Not Rated	Zinc-Plated Carbon Steel	Required	4444T852	00000	4444T854	00000

Oil-Embedded Ball Joint Linkages

An oil-embedded bronze insert slowly releases lubricant throughout the life of the joint. These ball joint linkages will require ongoing lubrication. They consist of ball joint rod ends with a ball stud attached to simplify mounting. The stud is machined to fit perfectly inside its housing and swivel in all directions—good for clutches, throttles, and shift control rods. Maximum ball swivel is approximate.

Ball Joint Linkages

	Shank			Ball Stud							Right-Hand Threaded Ball Stud		Left-Hand Threaded Ball Stud
	Thread Size	Ctr. Lg.	Thread Lg.	Thread Size	Ctr. Lg.	Lg.	Max. Ball Swivel	Static Radial Load Cap.	Material	Lubrication		Each		Each
Right-Hand Shank Thread



		10-32	1 1/4"	3/4"	10-32	1 1/64"	1/2"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K16	00000	6072K162	00000


		1/4"-28	1 9/16"	1"	1/4"-28	1 1/32"	9/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K11	0000	6072K112	0000
		5/16"-24	1 7/8"	1 1/4"	5/16"-24	1 7/32"	11/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K12	0000	6072K122	0000
		3/8"-24	1 15/16"	1 1/4"	3/8"-24	1 9/16"	29/32"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K13	00000	6072K132	00000
		7/16"-20	2 1/8"	1 3/8"	7/16"-20	1 3/4"	1 1/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K17	00000	———	0
		1/2"-20	2 7/16"	1 1/2"	1/2"-20	2"	1 1/8"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K14	00000	———	0
		5/8"-18	2 5/8"	1 5/8"	5/8"-18	2 1/2"	1 1/2"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K15	00000	———	0
		3/4"-16	2 7/8"	1 3/4"	3/4"-16	3"	1 13/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K18	00000	———	0


		Left-Hand Shank Thread



				10-32	1 1/4"	3/4"	10-32	1 1/64"	1/2"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K161	0000	———	0


				1/4"-28	1 9/16"	1"	1/4"-28	1 1/32"	9/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K111	0000	———	0
				5/16"-24	1 7/8"	1 1/4"	5/16"-24	1 7/32"	11/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K121	0000	———	0
				3/8"-24	1 15/16"	1 1/4"	3/8"-24	1 9/16"	29/32"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K131	00000	———	0
				7/16"-20	2 1/8"	1 3/8"	7/16"-20	1 3/4"	1 1/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K171	00000	———	0
				1/2"-20	2 7/16"	1 1/2"	1/2"-20	2"	1 1/8"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K141	00000	———	0
				3/4"-16	2 7/8"	1 3/4"	3/4"-16	3"	1 13/16"	50°	Not Rated	Zinc-Plated Carbon Steel	Lubricated	6072K181	00000	———	0

Internally Threaded Oil-Embedded Ball Joint Rod Ends with Grease Fitting

An oil-embedded bronze insert slowly releases lubricant to the rod end. Relubrication is recommended but not required. Connect your grease gun to the fitting to relubricate. Made of zinc-plated steel, these rod ends generally handle higher loads than stainless steel, aluminum, and nylon rod ends and offer moderate corrosion resistance.

	Shank
	Thread Size	Ctr. Lg., mm	Thread Lg., mm	ID, mm	Max. Ball Swivel	Overall Wd., mm	Overall Thk., mm	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints with Grease Fitting



		M8 × 1.25 mm	36	17	8	18°	22	12	4,000	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K52	000000


		M10 × 1.5 mm	43	21	10	17°	27	14	6,250	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K53	00000
		M12 × 1.75 mm	50	24	12	17°	30	16	7,750	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K54	00000

Oil-Embedded Ball Joint Rod Ends with Grease Fitting

	Shank
	Thread Size	Ctr. Lg., mm	Thread Lg., mm	ID, mm	Max. Ball Swivel	Overall Wd., mm	Overall Thk., mm	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints with Grease Fitting



		M8 × 1.25 mm	42	25	8	18°	22	12	4,000	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K42	000000


		M10 × 1.5 mm	48	29	10	17°	27	14	6,250	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K29	00000
		M12 × 1.75 mm	54	33	12	17°	30	16	7,750	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K44	00000

Oil-Embedded Ball Joint Rod Ends

	Shank
	Thread Size	Ctr. Lg.	Thread Lg.	ID	Max. Ball Swivel	Overall Wd.	Overall Thk.	Static Radial Load Cap., lb.	Material	Choose a Shank Thread Direction		Each
Ball Joints



		10-32	1 1/4"	3/4"	3/16"	13°	5/8"	5/16"	1,150	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K61	00000


		1/4"-28	1 9/16"	1"	1/4"	16°	3/4"	3/8"	2,150	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K62	0000
		5/16"-24	1 7/8"	1 1/4"	5/16"	14°	7/8"	7/16"	2,750	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K63	0000
		3/8"-24	1 15/16"	1 1/4"	3/8"	12°	1"	1/2"	4,000	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K64	0000
		7/16"-20	2 1/8"	1 3/8"	7/16"	14°	1 1/8"	9/16"	4,200	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K114	0000
		1/2"-20	2 7/16"	1 1/2"	1/2"	12°	1 5/16"	5/8"	6,700	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K124	00000
		5/8"-18	2 5/8"	1 5/8"	5/8"	16°	1 1/2"	3/4"	7,400	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K134	00000
		3/4"-16	2 7/8"	1 3/4"	3/4"	14°	1 3/4"	7/8"	11,550	Zinc-Plated Carbon Steel	Right Hand, Left Hand	6072K68	00000