We will reply to your message within an hour.
A spring delivers a constant, low-pressure flow of grease to your lubrication point, so it never runs dry.
Tighten the cover to dispense grease.
For more control over the flow rate of your grease, choose these gas-driven dispensers over spring-driven dispensers. Their continuous flow automatically adjusts based on the dispensing duration you set on their dial (from one to 12 months).
Powered by your air system, these dispensers release a precise amount of grease in timed intervals, so your machine will never have too much or too little.
By releasing a precise amount of grease at regular intervals, these motor-driven dispensers make sure your machine always has the right amount of grease.
Send precise amounts of grease to multiple lubrication points at regular intervals, so each point will always have the grease it needs.
Don’t wait for grease to travel through a new service line—install this grease-filled tubing between the pump and a lubrication point to begin lubricating immediately.
Because of their one-hand operation, pistol-grip grease guns are easier to use for adding grease to hard-to-reach places than lever-grip guns.
Dispense small amounts of grease with one of these compact guns.
Turn a small tube of grease into a dispenser.
Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.
Prime these guns faster than standard grease guns and use them with just one hand.
Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.
More portable than air-powered options, these guns operate on a rechargeable battery.
This gun comes filled with 2 oz. of lithium-thickened grease.
Protect sensitive parts, such as motor and bearing seals, from damage by monitoring the pressure of the grease you’re dispensing.
These guns deliver twice as much grease per stroke than standard lever-grip guns.
Deliver small amounts of grease with only a light push against the lubrication point.
Dispense small amounts of grease with this compact gun.
Dispense grease with the highest-pressure-rated gun we offer.
Use compressed air to dispense grease.
Start greasing faster than standard grease guns and continue with the high output of a lever grip.
Designed to lubricate linear motion components, such as slide bearings, guides, and ball screws, these guns work exclusively with THK grease cartridges and fittings.
Ensure that only food-grade grease is used in controlled areas—this gun only works with compatible food-grade grease cartridges.
Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.
Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.
These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.
These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.
These rigid nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.
Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.
These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.
Dispense from grease guns into grease fittings and bare lubrication points.
With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.
Mount holders in convenient locations to keep grease guns within reach.
These flexible extensions have a quick-disconnect fitting that snaps into your dispensing tip, so you can lubricate grease fittings that are hard to reach.
Convert dispensing tips with male threads into quick-disconnect couplings.
Sets include dispensing tips for grease fittings and bare lubrication points.
Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.
Replace the dispensing tip on your filler pump.
Mount these pumps to your grease container to bulk load guns.
Attach these nipples to guns to load grease from bulk filler pumps.
Dispense grease using compressed air.
This dispenser delivers over three times more grease per stroke than our dual-output dispensers.
Move grease-dispensing guns in any direction without kinking the outlet hose.
A display allows you to monitor how much grease is dispensed.
Connect these guns to container-mount dispensers for controlled dispensing.
Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.
Quickly lubricate bearings.
Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush to create a dispenser.
Mount these directly to your machine—the cup allows oil to gradually pass through to equipment, reducing time spent on manual lubrication.
For use in clean environments, these oil reservoirs have multiple air vents that keep pressure balanced.
A sealed design prevents contamination in dirty and dusty environments. Install a line between the reservoir's pressure port and the lubricated equipment to balance pressure.
A sealed design prevents contamination in dirty and dusty environments.
Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow.
Use these brushes to lubricate chain, gears, and conveyors. Connect to an oil dispenser, then turn the dial to adjust flow.
A solenoid automatically starts and stops flow to dispense lubricant while equipment is running.
Flip the lever to start and stop flow.
Use this dispenser to brush oil on chain, gears, and conveyors. Often used to replenish lubricant after washdowns.
Serve multiple lubrication points from a single location.
For use in clean environments, these manifolds have multiple air vents that keep pressure balanced.
Connect these brushes to oil reservoirs and flow adjustment valves to lubricate chain, gears, and conveyors.
Deliver an equal amount of oil to multiple lubrication points at once.
Control the flow of oil to a single lubrication point.
As chain, gears, and conveyors move, these brushes rotate to apply lubricant.
Customize these dispensers to serve up to 24 lubrication points from a single location.
Connect a tube fitting and tubing to the dispenser outlet to access hard-to-reach lubrication points.
A solenoid automatically starts and stops flow to a single lubrication point to dispense lubricant while equipment is running.
Manually adjust the flow of oil to a single lubrication point.
Designed to recycle oil, this system dispenses, collects, and filters oil for reuse. It delivers a controlled flow at a specific interval.
Air pressurizes the oil in the reservoir and atomizes the spray. Add a spray valve to direct the flow of oil.
Choose from pumps that dispense with a set interval. Turn the dial to adjust the flow from 0.1 oz. to 0.2 oz. per cycle.
Dispense a fixed amount of oil by pumping the handle.
Use with manual and electric pumps to dispense different amounts of oil from multiple lubrication points.
Ready to connect to your air system, these complete systems include a timer and a reservoir.
Connect these modular pumps to a reservoir and a solenoid valve to automate the flow of oil.
With a maximum flow of 0.005 oz. per cycle, these pumps deliver small, precise amounts of oil. Turn the dial to set the cycle interval.
Set the cycle interval as well as the dispensing duration. This pump has a maximum flow of 0.1 oz. per second.
Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers.
Add faucets to oil dispensing stations for increased utility.
Measure oil as it's dispensed.
Equipped with a flowmeter/totalizer, this dispenser displays both the flow rate and the cumulative flow volume of the oil dispensed.
These manual dispensers are more portable than air-powered dispensers.
Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum.
Lubricate your track to reduce friction and wear without shutting down equipment.
Clamp this applicator around control cables to lubricate them with minimal mess.
Deliver a mist of oil using shop air.
A needle dispensing tip provides fine control for lubricating small parts.
These dispensers have an opening for filling without removing the nozzle.
Pull the trigger on these oilers for easier one-hand operation than standard hand-held oil dispensers.
Use suction to remove old lubricant from gear boxes and transmissions.
These dispensers have a reservoir for recirculating coolant.
Draw coolant from your existing tank.
Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.
These dispensers have a reservoir and controls for coolant flow.
Deliver a small, controlled amount of coolant to a workpiece.
Replace messy mist coolant dispensers—these convert compressed air into a stream of cold air. They can be used in applications where liquid coolant can't.
These nozzles handle coolant pressure up to 150 psi.
Use as a lever to adjust the angle of coolant streams.
For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.
The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.
For high-pressure coolant lines, these nozzles withstand pressure up to 500 psi.
Press these nozzles into unthreaded holes.
Snap these adapters into the ball-socket connections on CNC machines to connect threaded coolant hose and nozzles to coolant supply ports.
Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.
Kits contain lengths of hose, nozzles, valves, and caps.
Use with Loc-Line hose to assemble and disassemble components.
Use with Snap-Loc hose to assemble and disassemble components.
Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.
Kit contains lengths of hose, nozzles, connectors, and assembly pliers.
This hose is made of steel.
Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.
Screw this dispenser to the top of most 8-oz. and 1-lb. brush-top antiseize lubricant cans. It has a trigger and a brush-tip nozzle that allow neat and easy one hand dispensing.
Keep thin grease from leaking out—the check valve on these fittings has a Buna-N seat that creates a tighter seal than check valves on other grease fittings.
To protect equipment from damage, the slit in the threads of these fittings acts like a breather vent, releasing any excess pressure and grease.
Keep a variety of grease fitting shapes, styles, and sizes on hand.
Thread these fittings into motors, bearings, engine blocks, and other machinery to create a lubrication point.
Prevent damage to bearing seals caused by over-lubrication—these fittings automatically stop grease flow when pressure is within the shut-off range.
The pins on these fittings lock with dispensing tips for pin-style fittings to create a tight seal.
Often used on earth movers, mining equipment, and other heavy machinery, these fittings have a T-shaped top that holds the dispensing tip in place so it won't pop off when adding grease.
The nipple doesn't stick out, so these fittings fit in tight spaces and won't be damaged if something knocks into them.
Drive these fittings into unthreaded holes.
Since they don’t protrude, these fittings avoid damage from impact and fit in tight spaces. Use a hammer and grease fitting installation tool to drive them into unthreaded holes.
Ensure a secure fit in unthreaded holes—these fittings cut threads as they’re installed. Use these fittings in tight spaces where protruding fittings won't work.
To fit securely in unthreaded holes, these fittings cut threads as they’re installed.
Flush out clogged grease in your fitting. Tapping these tools with a hammer forces light oil through your fitting and removes contamination from bearings, joints, and other parts.
Keep grease fittings free of dirt and moisture.
Tap these tools once or twice with a hammer to install fittings.
Remove worn fittings and repair threaded holes.
Save time by sending grease from one fitting to multiple points. These manifolds come with everything you need to set up a remote lubrication system.
Choose these blocks if you need to lubricate multiple points but need to control how each is greased. Unlike grease fitting manifolds, these blocks have multiple fittings, so you control what each point receives and when.
Access difficult-to-reach lubrication points from up to 10 ft. away.
When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.
Install these fittings into threaded holes.
Includes everything you need to lubricate air tools—oil, grease, and a grease gun with two precision-tip nozzles.
Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks.
Less than a quarter of the height of standard pressure-relief valves, these are often installed on tanks in low-clearance areas.
Spray liquids with these fillable bottles—the head twists on and off to make filling easy.
Connect these needles to adhesive cartridges, grease guns, and other dispensers with a threaded connection.
Apply lubricants, polishing compounds, and flux to small parts and pipes with these brushes. They're also used for dusting and surface cleaning.