Use this general purpose grease to lubricate most machinery.

Waterproof and heat-resistant, this grease can be autoclaved without washing out of equipment. It's chemically inert, so it won't interact with process fluids.

For use on metal parts to prevent corrosion and as an antiseize lubricant. Gauges are often coated in a thin layer of lanolin to move smoothly and maintain their precision.

This grease remains stable and in place under high pressure, heavy loads, and shock loads. It is NSF registered H1 and FDA compliant for incidental food contact. It's often used to lubricate heavy-duty food production equipment.

This grease comes in cartridges that only work with our Controlled-Use Food-Grade Lever-Grip Grease Guns to make sure that the right grease is used in food-processing areas. It is NSF registered H1 for incidental food contact.

Able to handle light to moderate loads at high speeds, this grease is often used on electric motor bearings for fans, pumps, and dryers.

Lubricate the ball and roller bearings that support your highest loads, such as wheels and heavy equipment.

Lubricate ball and roller bearings for high-load applications in wet environments, such as water processing, steel mills, and mining.

Lubricate ball and roller bearings for high-load applications. Often used on food-processing equipment, generators, and furnace door hinges, this grease is NSF registered H1 and meets FDA Compliant 21 CFR 178.3570 for incidental food contact.

Apply directly to seals and O-rings to extend service life by preventing drying and cracking.

Thickened with silica, this heavy grease clings to parts so it won't wash off in wet environments.

Highly pure, this grease is chemically inert, so it won’t contaminate sensitive environments or react with other substances. Due to its low vapor pressure, it resists evaporation, even at high temperatures.

Also known as dielectric grease, use insulating grease to lubricate and protect electrical systems.

Prevent wear and corrosion to keep carriages, guide rails, slides, tracks, and ways fast and accurate.

This grease stands up to the high speeds typically found in automated applications.

Use this grease in areas where there is the possibility of contact with food.

Made with moisture-resistant thickeners, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads.

For use in food-processing and preparation areas, this grease is NSF registered H1 or meets FDA 21 CFR 178.3570 for incidental contact with food. It's tacky to stick to open gears and roller chain.

Lithium thickener allows this grease to withstand over 30% more pressure than our standard ball screw grease.

Often used with engine bolts and heavily-loaded, slow-moving gears, these lubricants are formulated with moly (molybdenum disulfide) to prevent parts from locking together under high loads and pressure.

Free of metal particles, these lubricants won’t react with stainless steel. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.

Prevent parts from locking or corroding together even when exposed to wet environments—these lubricants stay in place in the presence of water.

Free of metal particles, these lubricants prevent stainless steel fasteners and close-fitting parts used in food-processing and preparation areas from locking together. They're NSF registered H1 for incidental food contact.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.