McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    67 Products

    Ceiling Tile Clips

    Secure ceiling tiles or join ceiling tile frame components.
    For Ceiling Tiles
    Image of Product. Front orientation. Ceiling Tile Clips. For Ceiling Tiles.
    Clips for ceiling tiles keep ceiling tiles in place.
    PVC—PVC clips must be used with fiberglass-reinforced plastic ceiling tile frames and molding.
    For 1/16" to 5/8" Thick Ceiling Tile—Those for ¹⁄₁₆"-⅝" ceiling tiles are best for entryways and other drafty areas.
    Material
    For Ceiling
    Tile Thk.
    Pkg.
    Qty.
    Pkg.
    Galvanized Steel1/16" to 5/8"1062765T81000000
    PVC3/32" to 3/4"14324N160000
    PVC3/4" to 1 1/4"14324N170000
    PVC2" to 2 3/4"14324N180000
     
    For Ceiling Tile Frames
    Image of Product. Front orientation. Ceiling Tile Clips. For Ceiling Tile Frames, Cross Clip.

    Cross Clip

    Image of Product. Front orientation. Ceiling Tile Clips. For Ceiling Tile Frames, Cross-Lock Clip.

    Cross-Lock Clip

    Image of Product. Front orientation. Ceiling Tile Clips. For Ceiling Tile Frames, Straight Clip.

    Straight Clip

    Image of Product. Front orientation. Ceiling Tile Clips. For Ceiling Tile Frames, Tee Clip.

    Tee Clip

    Clips for ceiling tile frames join ceiling tile frames and molding.
    Cross Clip and Cross-Lock Clip—Cross clips connect cross tees to main beams.
    Straight Clip—Straight clips attach two main beams. When installed with pop rivets, these clips help you meet ICC-ES seismic standards.
    Tee Clip—Tee clips join molding to main beams and cross tees.
    PVC—PVC clips must be used with fiberglass-reinforced plastic ceiling tile frames and molding.
    1" Notch Depth—For cross clips with a 1” notch depth, use cross-lock clips to secure them in place. Both clips help you comply with ICC-ES seismic requirements when fastened with pop rivets.
    1 9/32" Notch Depth—Use cross clips with a 1 ⁹⁄₃₂” notch depth to install lights or vents to beams where there isn’t a notch.
    For 9/16" to 15/16" Ceiling Tile Frame Thickness Range—Tee clips for ⁹⁄₁₆”-¹⁵⁄₁₆” ceiling tile frames help you comply with ICC-ES seismic requirements when properly installed.
    Material
    For Ceiling Tile
    Frame Thk. Range
    Notch
    Dp.
    Pkg.
    Qty.
    Pkg.
    Cross Clip
    PVC3/32"1"14324N1200000
    PVC3/32"1 9/32"14324N140000
     
    Cross-Lock Clip
    PVC3/32"—14324N130000
     
    Straight Clip
    PVC3/32"—14324N150000
     
    Tee Clip
    Galvanized Steel9/16" to 15/16"—162765T820000
    Aluminum15/16"—162765T830000
    PVC3/32"—14324N110000
     

    Clamps for Parts Inspection

    Image of ProductInUse. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Clamps for Parts Inspection.
    With a light yet sturdy hold, these clamps help you keep workpieces in place hands-free for measuring and inspecting. Thread them right into your fixturing surface, whether it’s a plate, tower, or table. Because they apply less pressure than machining clamps, they won’t distort your parts, so you can take accurate measurements. While these clamps aren’t sturdy enough for use in machining, you can still use them for light fabrication work, such as laser engraving.
    Hold-Down Clamps
    Image of Product. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Clamps for Parts Inspection, Tension Spring.

    Tension Spring

    Image of Product. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Clamps for Parts Inspection, Wire Tension Spring.

    Wire

    Tension

    Spring

    Image of Product. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Clamps for Parts Inspection, Thumb Screw.

    Thumb

    Screw

    Image of Product. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Clamps for Parts Inspection, Squeeze Tabs.

    Squeeze

    Tabs

    Hold-down clamps secure parts from the top.
    Tension Spring—Tension spring clamps are the most common type of clamp. Slide the arm down the shaft until it touches the top of your workpiece. Since you apply pressure directly, using too much force might move your part.
    Wire Tension Spring—Wire tension spring clamps have a slimmer profile than standard clamps, which means they don’t cover up as much of your workpiece. They’re often used to clamp small parts. Pull the wire arm away from the shaft, position your part, then release the arm so it moves back to cradle your part in place.
    Thumb Screw—Clamps with a thumb screw give you more control over the pressure you apply on a workpiece than tension spring clamps. Twisting the screw moves the clamp up or down in small increments, so they’re less likely to dent or scratch your workpiece. The knurled head on the screw is slip resistant, letting you make precise turns with reliable grip.
    Squeeze Tabs—Clamps with squeeze tabs on the back are best for supporting delicate parts. They have the lightest touch of any clamps we offer, because the tension is held in the tabs rather than the clamp itself. Press the tabs together like a clothespin and rotate the clamp where you need it.
    Rubber-Coated Tip—Clamps with a rubber-coated tip are less likely to scrape parts than clamps with an uncoated tip.
    Clamps
    Replacement
    Mounting Shafts
    Replacement
    Clamp Arms
    Reach
    Lg.
    Ht.
    Thread
    Lg.
    Material
    Tip Finish
    Each
    Each
    Each
    Tension Spring
     
    1/4"-20 Threads
    13/16"1"1/4"Aluminum—6203N27000000———0———0
    13/16"2"1/4"Aluminum—1337N2600000———0———0
    1 9/16"2 3/4"1/4"Aluminum—1728N9100000———0———0
    1 9/16"2 3/4"1/4"AluminumRubber Coated1728N9300000———0———0
    2 5/16"2 3/4"1/4"Aluminum—1728N9200000———0———0
    2 5/16"2 3/4"1/4"AluminumRubber Coated1728N9400000———0———0
    3 7/16"3"1/4"Aluminum—1337N2500000———0———0
     
    M4 × 0.7 mm Threads
    21 mm50 mm4.5 mmAluminum—1337N3700000———0———0
    38 mm50 mm4.5 mmAluminum—1337N3500000———0———0
    58 mm50 mm4.5 mmAluminum—1337N3600000———0———0
     
    M6 × 1 mm Threads
    21 mm50 mm6.2 mmAluminum—1337N3400000———0———0
    38 mm75 mm6.2 mmAluminum—1337N3200000———0———0
    58 mm75 mm6.2 mmAluminum—1337N3300000———0———0
     
    M8 × 1.25 mm Threads
    38 mm75 mm6.2 mmAluminum—1337N2900000———0———0
    58 mm75 mm6.2 mmAluminum—1337N3100000———0———0
     
    Wire Tension Spring
     
    1/4"-20 Threads
    1 1/4"1"1/4"Aluminum—1337N2700000———0———0
    2"2"1/4"Aluminum—1337N2800000———0———0
     
    Thumb Screw
     
    1/4"-20 Threads
    1 9/16"1 1/2"3/8"Aluminum—6203N1100000———0———0
    3"2 1/2"1/4"Aluminum—6203N1200000———0———0
    4 3/8"3 1/2"3/8"Aluminum—6203N13000000———0———0
     
    M6 × 1 mm Threads
    40 mm38 mm9.5 mmAluminum—6203N1400000———0———0
    76 mm63 mm6.4 mmAluminum—6203N1500000———0———0
    112 mm89 mm9.5 mmAluminum—6203N16000000———0———0
     
    Squeeze Tabs
     
    1/4"-20 Threads
    3 1/4"3"3/8"Plastic—6203N21000006203N180000006203N17000000
     
    M6 × 1 mm Threads
    83 mm76 mm9.5 mmPlastic—6203N22000006203N19000006203N1700000
     

    Fixture Tables for Welding

    Image of System. Front orientation. Fixture Tables. Fixture Tables for Welding.
    Use these tables as a foundation for welding setups. They have 5/8" unthreaded holes with 2" center-to-center spacing, so they’re compatible with clamps, stops, V-blocks, and other components. To protect tables and other components from heat and spatter, coat them in welding antispatter.
    Hold-Down Clamps
    Image of Product. Front orientation. Contains Annotated. Fixture Tables. Fixture Tables for Welding, Hold-Down Clamps.
    Hold-down clamps secure work anywhere on the table's surface. The arm slides up and down freely so the clamp can be quickly moved into position. Once in place, use the handle for final tightening.
    Clamping
    Surface
    Material
    Max. Clamping
    Clearance
    Reach
    Lg.
    Holding
    Cap., lb.
    For Hole
    Size
    Type
    Material
    Texture
    Body
    Handle
    Each
    8 1/2"4"4005/8"Swivel PadSteelSmoothSteelSteel1403N87000000
     
    Side Clamps
    Image of Product. Front orientation. Contains Annotated. Fixture Tables. Fixture Tables for Welding, Side Clamps.
    Side clamps apply pressure to hold work from the side.
    Lg.
    Ht.
    Stud
    Dia.
    Material
    Spindle
    Material
    Each
    3 1/2"2"5/8"Black-Oxide SteelAluminum
    		1403N62000000
     

    Fixturing for Parts Inspection

    Image of ProductInUse. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection.
    From towers and brackets to standoffs and supports, these components are the building blocks for your custom fixturing setup. They elevate parts so you can access a variety of angles for measuring and inspecting while protecting your measuring device from hitting the inspection table. You’ll often see them used with coordinate measuring machines (CMMs). They’re not for use in machining applications.
    Kits
    Image of Product. Front orientation. Coordinate Measuring Machine Plates and Fixtures. Fixturing for Parts Inspection, Kits.
    Kits come with a base set of clamps, standoffs, and other supports for positioning parts. Add other components, such as magnetic V-supports, to expand your starter toolkit for complex setups.
    No. of
    Pieces
    Includes
    Each
    1/4"-20 Threads
    433 Hold-Down Clamps—1 9/16" Reach × 3" O'all Ht.
    3 Hold-Down Clamps—2 5/16" Reach × 3" O'all Ht.
    3 Standoffs—1/2" Dia. × 3/4" Ht.
    3 Standoffs—1/2" Dia. × 2" Ht.
    3 Standoffs—3/4" Dia. × 3/4" Ht.
    3 Standoffs—3/4" Dia. × 2" Ht.
    6 Standoffs—1/2" Dia. × 1" Ht.
    6 Standoffs—3/4" Dia. × 1" Ht.
    3 Pin Supports—1/2" Dia. × 1/2" Ht.
    3 Pin Supports—3/4" Dia. × 1/2" Ht.
    3 Cone Supports
    1 Adjustable-Height Sleeve for Standoffs
    2 Positioning Plates
    1 Wood Stand    		1355N850000000
    633 Hold-Down Clamps—1 9/16" Reach × 3" O'all Ht.
    3 Hold-Down Clamps—2 5/16" Reach × 3" O'all Ht.
    2 Toggle Clamps with Mounting Plate
    3 Standoffs—1/2" Dia. × 3/4" Ht.
    3 Standoffs—1/2" Dia. × 2" Ht.
    3 Standoffs—3/4" Dia. × 3/4" Ht.
    3 Standoffs—3/4" Dia. × 2" Ht.
    3 Standoffs—1" Dia. × 3/4" Ht.
    3 Standoffs—1" Dia. × 2" Ht.
    6 Standoffs—1/2" Dia. × 1" Ht.
    6 Standoffs—3/4" Dia. × 1" Ht.
    6 Standoffs—1" Dia. × 1" Ht.
    1 Precision Adjustable-Height Standoff—1/2" Dia.
    3 Pin Supports—1/2" Dia. × 1/2" Ht.
    3 Pin Supports—3/4" Dia. × 1/2" Ht.
    6 Cone Supports
    2 Any-Angle Cone Supports
    1 Adjustable-Height Sleeve for Standoffs
    2 Positioning Plates
    1 Wood Stand    		1355N9500000000
     
    M6 Threads
    422 Hold-Down Clamps—38 mm Reach × 38 mm O'all Ht.
    4 Hold-Down Clamps—58 mm Reach × 75 mm O'all Ht.
    3 Standoffs—13 mm Dia. × 20 mm Ht.
    3 Standoffs—13 mm Dia. × 25 mm Ht.
    3 Standoffs—13 mm Dia. × 50 mm Ht.
    3 Standoffs—19 mm Dia. × 20 mm Ht.
    3 Standoffs—19 mm Dia. × 25 mm Ht.
    3 Standoffs—19 mm Dia. × 50 mm Ht.
    3 Standoffs—25 mm Dia. × 20 mm Ht.
    3 Standoffs—25 mm Dia. × 25 mm Ht.
    3 Standoffs—25 mm Dia. × 50 mm Ht.
    1 Adjustable-Height Standoff—13 mm Dia.
    2 Pin Supports—13 mm Dia. × 25 mm Ht.
    3 Cone Supports
    1 Positioning Plate—35 mm Lg.
    1 Positioning Plate—76 mm Lg.
    1 Acetal Plastic Tray    		1409N51000000
     

    Economy Setup Clamp and T-Slot Fastener Kits

    Image of Product. Front orientation. Fixture Kits. Economy Setup Clamp and T-Slot Fastener Kits.
    Good for occasional machining, economy kits contain lower-strength components than standard kits. Select a kit that matches your table's slot width. Kits include studs, setup clamps, step blocks, T-slot nuts, flange nuts, and coupling nuts.
    Step
    Block
    For Slot
    Wd.
    No. of
    Pieces
    Includes
    Ht. Range
    Wd.
    T-Slot Nut
    Base Wd.
    Material
    Container Type
    Each
    1/2"-13
    5/8"524 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)    		3/4" to 6"1"1"SteelPlastic Wall-Mount Rack31255A890000000
     

    Setup and Fixture Clamp Kits for Welding

    Image of ProductInUse. Front orientation. Fixture Kits. Setup and Fixture Clamp Kits for Welding.
    Image of Product. 66-Piece Kit. Front orientation. Fixture Kits. Setup and Fixture Clamp Kits for Welding.
    Image of Product. 65-Piece Kit with Metal Tray. Front orientation. Fixture Kits. Setup and Fixture Clamp Kits for Welding, Metal Tray.

    66-Piece Kit

    65-Piece Kit with Metal Tray

    Hold and position workpieces on your welding fixture table. These kits include all the clamps, locating pins, and other components you need for most welding setups.
    For Hole
    Dia.
    No. of
    Pieces
    Includes
    Material
    Container
    Type
    Each
    5/8"662 Hold-Down Clamps with 6-1/2" Maximum Clamping Clearance
    4 Locking Plier Clamps (2 each with 2 1/4" and 3 1/4" Reach)
    2 Side Clamps
    2 Locating Pins
    10 Ball-Lock Screws
    8 V-Blocks
    2 Magnetic Top V-Pads
    8 Straightedge Stops
    8 Flat Rests
    4 Risers
    12 Magnetic Risers
    4 Right-Angle Brackets    		Steel—8536N120000000
    16 mm654 Setup Blocks with 6 Holes
    4 Hold-Down Clamps with 6-1/2" Maximum Clamping Clearance
    4 Locking Plier Clamps with 2-1/4" Reach
    30 Locating Pins
    6 Ball-Lock Screws
    12 Shims for Ball-Lock Screws
    1 Set of MIG Welding Pliers
    3 Right-Angle Brackets
    1 Quick-Set Angle Fence    		SteelMetal Tray8536N1100000000
     

    Setup Clamp and T-Slot Fastener Kits

    Image of Product. Metal Wall-Mount Rack. Front orientation. Fixture Kits. Setup Clamp and T-Slot Fastener Kits, Metal Wall-Mount Rack.
    Image of Product. Wood Stand and Metal Tray. Front orientation. Fixture Kits. Setup Clamp and T-Slot Fastener Kits, Metal Tray.

    Metal Wall-Mount Rack

    Wood Stand and Metal Tray

    Get everything needed for basic workholding on a machine table. Select a kit that matches your table's slot width. Each kit includes studs, setup clamps, step blocks, T-slot nuts, flange nuts, coupling nuts, and a T-slot cleaning tool.
    Step
    Block
    For Slot
    Wd.
    No. of
    Pieces
    Includes
    Ht. Range
    Wd.
    T-Slot Nut
    Base Wd.
    Material
    Container Type
    Each
    5/16"-18
    3/8"494 T-Slot Nuts
    4 Flange Nuts
    4 Coupling Nuts
    3 Step Block Pairs
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		3/4" to 6"1"5/8"SteelWood Stand, Metal Tray8957A190000000
     
    3/8"-16
    7/16"534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		3/4" to 6"1"11/16"SteelMetal Wall-Mount Rack8957A83000000
    1/2"534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		3/4" to 6"1"7/8"SteelMetal Wall-Mount Rack8957A41000000
    9/16"534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		3/4" to 6"1"7/8"SteelMetal Wall-Mount Rack8957A74000000
     
    1/2"-13
    9/16"534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		3/4" to 6"1"7/8"SteelMetal Wall-Mount Rack8957A42000000
    5/8"534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		3/4" to 6"1"1"SteelMetal Wall-Mount Rack8957A43000000
    11/16"534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		3/4" to 6"1"1 1/8"SteelMetal Wall-Mount Rack8957A44000000
     
    5/8"-11
    11/16"534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		3/4" to 6"1"1 1/8"SteelMetal Wall-Mount Rack8957A45000000
    3/4"534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		3/4" to 6"1"1 1/4"SteelMetal Wall-Mount Rack8957A46000000
    13/16"534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 2 1/2", 4", and 6" lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		3/4" to 6"1"1 1/4"SteelMetal Wall-Mount Rack8957A75000000
     
    3/4"-10
    13/16"494 T-Slot Nuts
    4 Flange Nuts
    4 Coupling Nuts
    3 Step Block Pairs
    6 Step Setup Clamps (2 each in 4", 6", and 8" lengths)
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		1 3/4" to 9"1 1/2"1 1/4"SteelWood Stand, Metal Tray8957A2000000
    7/8"494 T-Slot Nuts
    4 Flange Nuts
    4 Coupling Nuts
    3 Step Block Pairs
    6 Step Setup Clamps (2 each in 4", 6", and 8" lengths)
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		1 3/4" to 9"1 1/2"1 1/2"SteelWood Stand, Metal Tray8957A22000000
    1"494 T-Slot Nuts
    4 Flange Nuts
    4 Coupling Nuts
    3 Step Block Pairs
    6 Step Setup Clamps (2 each in 4", 6", and 8" lengths)
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		1 3/4" to 9"1 1/2"1 5/8"SteelWood Stand, Metal Tray8957A76000000
    1 1/16"494 T-Slot Nuts
    4 Flange Nuts
    4 Coupling Nuts
    3 Step Block Pairs
    6 Step Setup Clamps (2 each in 4", 6", and 8" lengths)
    24 Studs (4 each in 3", 4", 5", 6", 7", and 8" lengths)
    T-Slot Cleaner    		1 3/4" to 9"1 1/2"1 5/8"SteelWood Stand, Metal Tray8957A77000000
     
    M8 × 1.25 mm
    10 mm494 T-Slot Nuts
    4 Flange Nuts
    4 Coupling Nuts
    3 Step Block Pairs
    6 Step Setup Clamps (2 each in 64 mm, 102 mm, and 152 mm lengths)
    24 Studs (4 each in 80 mm, 110 mm, 125 mm, 150 mm, 175 mm, and 200 mm lengths)
    T-Slot Cleaner    		19 mm to 152 mm25 mm16 mmSteelWood Stand, Metal Tray8957A78000000
     
    M10 × 1.5 mm
    12 mm534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 64 mm, 102 mm, and 152 mm lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 80 mm, 110 mm, 125 mm, 150 mm, 175 mm, and 200 mm lengths)
    T-Slot Cleaner    		19 mm to 152 mm25 mm19 mmSteelMetal Wall-Mount Rack8957A71000000
    14 mm534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 64 mm, 102 mm, and 152 mm lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 80 mm, 110 mm, 125 mm, 150 mm, 175 mm, and 200 mm lengths)
    T-Slot Cleaner    		19 mm to 152 mm25 mm22 mmSteelMetal Wall-Mount Rack8957A79000000
     
    M12 × 1.75 mm
    14 mm534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 64 mm, 102 mm, and 152 mm lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 80 mm, 110 mm, 125 mm, 150 mm, 175 mm, and 200 mm lengths)
    T-Slot Cleaner    		19 mm to 152 mm25 mm22 mmSteelMetal Wall-Mount Rack8957A72000000
    16 mm534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 64 mm, 102 mm, and 152 mm lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 80 mm, 110 mm, 125 mm, 150 mm, 175 mm, and 200 mm lengths)
    T-Slot Cleaner    		19 mm to 152 mm25 mm25 mmSteelMetal Wall-Mount Rack8957A81000000
     
    M16 × 2 mm
    18 mm534 Coupling Nuts
    3 Step Block Pairs
    6 Flange Nuts
    6 Step Setup Clamps (2 each in 64 mm, 102 mm, and 152 mm lengths)
    6 T-Slot Nuts
    24 Studs (4 each in 80 mm, 110 mm, 150 mm, 175 mm, 200 mm, and 250 mm lengths)
    T-Slot Cleaner    		19 mm to 152 mm25 mm29 mmSteelMetal Wall-Mount Rack8957A82000000
     
    back to top