Grid Fixture Plates for Welding
Build fixturing setups for welding onto these plates. They have 5/8” unthreaded holes with 2” center-to-center spacing, so they’re compatible with clamps, stops, V-blocks, and other components. Made from nitrided steel, they have a hardened surface that resists wear, prevents corrosion, and keeps weld spatter from sticking. They’re easy to maintain and they hold their shape over time. To add resistance to heat and spatter, apply welding antispatter to all the components in your setup.
Overall | Unthreaded Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | No. of | Dia. | Ctr.-to-Ctr. | Wt., lbs. | Flatness Tolerance | Material | Each | |
| 6 5/16" | 20" | 5/8" | 27 | 5/8" | 2" | 20 | 0.02" per 24" × 24" | Nitrided Steel | 8914N116 | 0000000 |
Build fixtures on multiple sides of these squares—you can use them individually or stack them.
Slots | Holes | Tolerance | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Orientation | No. Of | Style | Lg. | Wd. | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Wt., lbs. | Squareness per 4" | Parallel | Material | Each | ||
| A | 2" | 2" | 10" | __ | __ | __ | __ | __ | 20 | 5/8" | 1" | __ | 5 | 0.001" | 0.002" | Nitrided Steel | 1392N11 | 0000000 |
| B | 3 3/4" | 4" | 3 3/4" | __ | 4 1 | Straight Curved | 2" 2 13/16" | 5/8" 5/8" | 6 | 5/8" | 2" | __ | 5 | Not Rated | Not Rated | Iron | 1392N111 | 000000 |
| C | 4" | 4" | 4" | __ | 2 | Straight | 2 3/16" | 5/8" | 21 | 5/8" | 2" | 1 7/16" | 8 | 0.001" | 0.002" | Nitrided Steel | 1392N12 | 000000 |
| C | 4" | 4" | 8" | __ | 2 | Straight | 2" | 5/8" | 39 | 5/8" | 2" | 1 7/16" | 13 | 0.001" | 0.002" | Nitrided Steel | 1392N13 | 000000 |
| C | 4" | 4" | 12" | __ | 2 | Straight | 2" | 5/8" | 57 | 5/8" | 2" | 1 7/16" | 18 | 0.001" | 0.002" | Nitrided Steel | 1392N14 | 000000 |
| D | 4" | 8" | 24" | __ | 2 4 2 | Straight Straight Straight | 4" 2" 4" | 5/8" 5/8" 5/8" | 157 | 5/8" | 2" | 2" | 53 | Not Rated | Not Rated | Nitrided Steel | 1392N112 | 00000000 |
| D | 4" | 8" | 36" | __ | 2 4 2 | Straight Straight Straight | 4" 2" 4" | 5/8" 5/8" 5/8" | 235 | 5/8" | 2" | 2" | 77 | Not Rated | Not Rated | Nitrided Steel | 1392N113 | 00000000 |
| E | 6" | 2" | 12" | __ | 2 | Straight | 4" | 5/8" | 26 | 5/8" | 1" | 1" | 7 | 0.002" | 0.006" | Iron | 1392N15 | 000000 |
| F | 8" | 2" | 20" | Left | 4 2 1 | Straight Curved Curved | 2" 2 13/16" 5 5/8" | 5/8" 5/8" 5/8" | 43 | 5/8" | 1" | 1" | 15 | Not Rated | Not Rated | Iron | 1392N115 | 000000 |
| F | 8" | 2" | 20" | Right | 4 2 1 | Straight Curved Curved | 2" 2 13/16" 5 5/8" | 5/8" 5/8" 5/8" | 43 | 5/8" | 1" | 1" | 15 | Not Rated | Not Rated | Iron | 1392N114 | 000000 |
Hold-down clamps secure work anywhere on the fixture plate’s surface. The arm slides up and down the body of the clamp, so you can quickly move it into position. Twist the handle to tighten the clamp onto your workpiece.
Clamping Surface | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Max. Clamping Clearance | Reach | Holding Capacity, lbs. | For Hole Size | Type | Material | Texture | Body | Handle | Each | |
| 8 1/2" | 4" | 400 | 5/8" | Swivel Pad | Steel | Smooth | Steel | Steel | 1403N87 | 000000 |
Side clamps press against the side of a workpiece to hold it in place.
| Lg. | Ht. | Stud Dia. | Material | Spindle Material | Each | |
| 3 1/2" | 2" | 5/8" | Black-Oxide Steel | Aluminum | 1403N62 | 000000 |
Mount V-blocks to the fixture plate to hold round workpieces in place.
V-blocks with multiple studs slot into at least two grid holes, which keeps them from shifting when you move workpieces in or out. They have two rows of mounting holes, so you can position them at a 45° or 90° angle on your grid.
Pivoting V-blocks can hold both the outer and inner diameter of your workpiece. They can go from cradling the outside of a pipe at 60°, to lying completely flat, to gripping the inside of a pipe at a 60° angle.
Head | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Workpiece Dia. | Dia. | Lg. | Wd. | Ht. | Lg. | Wd. | Ht. | V Angle | V Dp. | V Wd. | Stud Dia. | Material | Machinable | Includes | Each | |
Single Stud | ||||||||||||||||
Fixed | ||||||||||||||||
| 2 1/2" | 1 5/8" | __ | __ | 21/32" | __ | __ | __ | 120° | 13/32" | 1 7/16" | 5/8" | Black-Oxide Steel | No | __ | 1403N67 | 000000 |
| 8" | 3 3/16" | __ | __ | 1 13/32" | __ | __ | __ | 150° | 19/32" | 3 1/16" | 5/8" | Black-Oxide Steel | No | __ | 1403N68 | 00000 |
Pivoting | ||||||||||||||||
| 4" | __ | 2 1/8" | 2" | 1 1/8" | __ | __ | __ | 60° | 27/32" | 1" | 5/8" | Zinc-Plated Steel | No | __ | 1365N21 | 00000 |
| Pair | ||||||||||||||||
Multiple Studs | ||||||||||||||||
Fixed | ||||||||||||||||
| 4" | __ | __ | __ | __ | 8 1/4" | 2 1/4" | 2" | 120° | 1/2" | 1 11/16" | 5/8" | Black-Oxide Steel | No | Four Mounting Studs | 8907N111 | 000000 |
Risers hold components above the surface of the fixture plate. Use the hole at the top to attach a V-block or other component.
Angle fences have holes set at commonly used angles, so you can quickly align components in your setup.
Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | No. of | Dia. | Angle Measuring Range | Angle Increments | Material | Each | |
| 10" | 8" | 3/8" | 12 | 5/8" | 0° to 45° | 5° | Black-Oxide Steel | 1403N117 | 000000 |
Right-angle brackets hold work at a precise 90° angle.
Slots | Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | No. of | Lg. | Wd. | No. of | Dia. | Ctr.-to-Ctr. | Material | Each | |
| 3 5/8" | 1 3/16" | 1 5/8" | 1 | 2" | 0.625" | 1 | 5/8" | __ | Black-Oxide Steel | 1403N41 | 000000 |
| 3 5/8" | 1 3/16" | 3 5/8" | 1 | 2" | 0.625" | 3 | 5/8" | 1" | Black-Oxide Steel | 1403N42 | 00000 |
| 6" | 1 3/16" | 3 5/8" | 1 | 5" | 0.625" | 3 | 5/8" | 1" | Black-Oxide Steel | 1403N43 | 00000 |
| 6" | 2" | 12" | 1 | 5" | 0.625" | 11 | 5/8" | 1" | Black-Oxide Steel | 1403N45 | 000000 |
Straightedge stops mount to the fixture plate to create a reliable reference for alignment.
Toggle clamp mounting plates let you position a toggle clamp anywhere on the fixture plate.
Plate | Mounting Holes | |||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | No. of | Thread Size | Stud Dia. | Material | Each | |
| 2 3/4" | 2 3/8" | 5/8" | 4, 4 | M5, M6 | 5/8" | Steel | 1365N31 | 000000 |
Fasteners connect components to each other or to the fixture plate.
Thread | Head | Drive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shoulder Lg. | Size | Lg. | Dia. | Ht. | Lg. | Size | Style | Material | Includes | Pkg. Qty. | Each | |
Shoulder Screw—5/8” Shoulder Dia. (-0.001” to 0”) | ||||||||||||
| 1/2" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 1403N72 | 00000 |
| 3/4" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 1403N73 | 0000 |
| 7/8" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 1403N74 | 0000 |
| 1" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 1403N75 | 0000 |
| 1 1/4" | 1/2"-13 | 3/4" | 7/8" | 3/8" | __ | 5/16" | Hex | Black-Oxide Steel | Nut, Washer | __ | 1403N76 | 0000 |
Ball-Lock Screw—5/8” Stud Dia. | ||||||||||||
| __ | __ | __ | 7/8" | 1/2" | 7/8"-1 1/16" | 1/4" | Hex | Steel | __ | __ | 1403N69 | 00000 |
| Pkg. | ||||||||||||
| __ | __ | __ | 7/8" | 1/2" | 7/8"-1 1/16" | 1/4" | Hex | Steel | __ | 12 | 1403N71 | 000000 |