McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    67 Products

    Grinding Bits for Metals

    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Metals, Style 1.
    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Metals, Style 17.

    Style

    1

    Style

    17

    Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.
    Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
    Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    Cylinder
    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Metals, Style 1.

    Style

    1

    Head
    Abrasive
    Style
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Shape
    No.
    Material
    Bond Material
    Shank
    Lg.
    Choose a Grit (Surface Texture)
    Pkg.
    Qty.
    Pkg.
    For Steel
     
    1/8" Diameter Shank
    13/32"5/32"93,750W141Aluminum OxideVitrified Ceramic1 1/2"120 (Smooth) Blue10000000000000
     
    For Steel, Stainless Steel, and Iron
     
    1/8" Diameter Shank
    13/32"1/4"105,000W142Aluminum OxideVitrified Clay1 1/2"
    60 (Rough) Orange
    ,
    120 (Smooth) Blue
    		5000000000000
     
    Flat-Top Cone
    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Metals, Style 17.

    Style

    17

    Head
    Abrasive
    Style
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Shape
    No.
    Material
    Bond Material
    Shank
    Lg.
    Choose a Grit (Surface Texture)
    Pkg.
    Qty.
    Pkg.
    For Steel, Stainless Steel, and Iron
     
    1/8" Diameter Shank
    173/32"1/4"105,000B98Aluminum OxideVitrified Clay1 1/2"
    60 (Rough) Orange
    ,
    120 (Smooth) Blue
    		50000000000000
     

    Burs

    Cylinder with Flat Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Cylinder with Flat Tip.
    Image of Product. Front orientation. Burs. Burs, Cylinder with Flat Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Cylinder with Flat Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Flat cylinder burs are for straight edges and flat surfaces.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    3/32"3/32"3/8"1 1/2"SA-63Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000000000000000
    1/8"3/32"7/16"1 1/2"SA-42Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000
     
    Cylinder with Flat-Cutter Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Cylinder with Flat-Cutter Tip.
    Image of Product. Double-Cut Tooth. Front orientation. Burs. Burs, Cylinder with Flat-Cutter Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Single-Cut Tooth. Front orientation. ZoomedIn view. Burs. Burs, Cylinder with Flat-Cutter Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Flat cutter cylinder burs are for straight edges, flat surfaces, and flat-bottom holes and slots.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/8"3/32"7/16"1 1/2"SB-42Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000000000000000
     
    Cylinder with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Cylinder with Round Tip.
    Image of Product. Front orientation. Burs. Burs, Cylinder with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Cylinder with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round cylinder burs are for curved surfaces and slots and round-bottom holes and slots.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    3/32"3/32"3/8"1 1/2"SC-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000000000000000
    1/8"3/32"7/16"1 1/2"SC-41Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000
     
    Tree with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Tree with Round Tip.
    Image of Product. Front orientation. Burs. Burs, Tree with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Tree with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round tree burs are for curved surfaces and slots and curved holes with rounded bottoms.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    3/32"3/32"1/4"1 1/2"SF-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000000000000000
    1/8"3/32"1/4"1 1/2"SF-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000000000000000
     
    Tree with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Tree with Pointed Tip.
    Image of Product. Front orientation. Burs. Burs, Tree with Pointed Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Tree with Pointed Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Pointed tree burs are for curved surfaces and slots and curved holes with pointed bottoms.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    3/32"3/32"1/4"1 1/2"SG-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000000000000000
    1/8"3/32"1/4"1 1/2"SG-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000000000000000
     
    Ball
    Image of ProductInUse. Front orientation. Burs. Burs, Ball.
    Image of Product. Front orientation. Burs. Burs, Ball, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Ball, Single-Cut Tooth.

    Single-Cut Tooth

    Ball burs are for curved surfaces, round slots, and round-bottom holes.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    3/32"3/32"3/32"1 1/2"SD-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000000000000000
    1/8"3/32"3/32"1 1/2"SD-41Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000
     
    Oval
    Image of ProductInUse. Front orientation. Burs. Burs, Oval.
    Image of Product. Front orientation. Burs. Burs, Oval, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Oval, Single-Cut Tooth.

    Single-Cut Tooth

    Oval burs are for oblong slots and holes.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/8"3/32"1/8"1 1/2"SE-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000000
     
    Inverted Cone
    Image of ProductInUse. Front orientation. Burs. Burs, Inverted Cone.
    Image of Product. Front orientation. Burs. Burs, Inverted Cone, Double-Cut Tooth.
    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Inverted Cone, Single-Cut Tooth.

    Double-Cut Tooth

    Single-Cut Tooth

    Inverted cone burs are for inverted-angle holes and dovetailed slots.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/8"3/32"1/8"10°1 1/2"SN-41Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000000000000000
     
    Tapered Cone with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Tapered Cone with Round Tip.
    Image of Product. Front orientation. Burs. Burs, Tapered Cone with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Tapered Cone with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round tapered cone burs are for tapered holes and slots with rounded bottoms.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/8"3/32"3/8"8°1 1/2"SL-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000000
     
    Tapered Cone with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Tapered Cone with Pointed Tip.
    Image of Product. Front orientation. Burs. Burs, Tapered Cone with Pointed Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Tapered Cone with Pointed Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Pointed tapered cone burs are for tapered holes and slots with pointed bottoms.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    3/32"3/32"1/4"10°1 1/2"SM-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000000000000000
     
    Thin Disc with Tapered Edge
    Image of ProductInUse. Side1 orientation. Burs. Burs, Thin Disc with Tapered Edge.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Thin Disc with Tapered Edge, Single-Cut Tooth.

    Single-Cut Tooth

    Tapered-edge thin disc burs are for thin crevices, flat surfaces, and scoring lines.
    High-Speed Steel—The choice for general purpose deburring on steel, though not as strong as carbide.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    For Use On
    Each
    High-Speed Steel
    3/32"3/32"1/32"1 3/4"Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium0000000000000
     
    Whisk
    Image of ProductInUse. Side1 orientation. Burs. Burs, Whisk.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Whisk, Single-Cut Tooth.

    Single-Cut Tooth

    Debur holes that intersect within your workpiece (cross holes). Made of flexible wire, these burs adjust to fit holes of various diameters.
    High-Speed Steel—The choice for general purpose deburring on steel, though not as strong as carbide.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    For Use On
    Each
    High-Speed Steel
    1/8"3/32"1"4"Steel, Hardened Steel, Tool Steel, Stainless Steel0000000000000
     
    Cup
    Image of ProductInUse. Side1 orientation. Burs. Burs, Cup.
    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Cup, Single-Cut Tooth.

    Single-Cut Tooth

    Cup burs are for rounding ends. Because they are prone to clogging, they should always be used with lubricant.
    High-Speed Steel—The choice for general purpose deburring on steel, though not as strong as carbide.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    For Use On
    Each
    High-Speed Steel
    3/32"3/32"1/16"1 3/4"Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium0000000000000
     

    Long-Life Grinding Bits for Nonmetals

    Image of Product. Front orientation. Grinding Bits. Long-Life Grinding Bits for Nonmetals, Style 4.
    Image of Product. Front orientation. Grinding Bits. Long-Life Grinding Bits for Nonmetals, Style 9.

    Style

    4

    Style

    9

    The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.
    Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
    Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    Barrel
    Image of Product. Front orientation. Grinding Bits. Long-Life Grinding Bits for Nonmetals, Style 4.
    Image of Product. Front orientation. Grinding Bits. Long-Life Grinding Bits for Nonmetals, Style 9.

    Style

    4

    Style

    9

    Head
    Style
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Abrasive
    Material
    Overall
    Lg.
    Grit (Surface
    Texture)
    Each
    For Grout, Carbide, Ceramics, and Glass
     
    1/8" Diameter Shank
    43/32"5/16"40,000Diamond2 1/2"120 (Smooth) Silver00000000000000
     
    1/4" Diameter Shank
    93/32"5/16"40,000Diamond2 1/2"120 (Smooth) Silver0000000000000
     

    Long-Life Burs

    A titanium aluminum nitride (TiAlN) coating provides heat and wear resistance for longer life.
    Cylinder with Flat Tip
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Cylinder with Flat Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Cylinder with Flat Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Cylinder with Flat Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Flat cylinder burs are for straight edges and flat surfaces.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/8"3/32"7/16"1 1/2"SA-42Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000000
     
    Cylinder with Flat-Cutter Tip
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Cylinder with Flat-Cutter Tip.
    Image of Product. Double-Cut Tooth. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Cylinder with Flat-Cutter Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Flat cutter cylinder burs are for straight edges, flat surfaces, and flat-bottom holes and slots.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/8"3/32"7/16"1 1/2"SB-42Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000
     
    Cylinder with Round Tip
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Cylinder with Round Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Cylinder with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Cylinder with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round cylinder burs are for curved surfaces and slots and round-bottom holes and slots.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/8"3/32"7/16"1 1/2"SC-41Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000000
     
    Tree with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Tree with Pointed Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Tree with Pointed Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Tree with Pointed Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Pointed tree burs are for curved surfaces and slots and curved holes with pointed bottoms.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/8"3/32"1/4"1 1/2"SG-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000000
     
    Ball
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Ball.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Ball, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Ball, Single-Cut Tooth.

    Single-Cut Tooth

    Ball burs are for curved surfaces, round slots, and round-bottom holes.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    3/32"3/32"3/32"1 1/2"SD-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000000
    1/8"3/32"3/32"1 1/2"SD-41Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000000000000000
     
    Inverted Cone
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Inverted Cone.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Inverted Cone, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Inverted Cone, Single-Cut Tooth.

    Single-Cut Tooth

    Inverted cone burs are for inverted-angle holes and dovetailed slots.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/8"3/32"1/8"10°1 1/2"SN-41Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000000
     
    Tapered Cone with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Tapered Cone with Pointed Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Tapered Cone with Pointed Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Tapered Cone with Pointed Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Pointed tapered cone burs are for tapered holes and slots with pointed bottoms.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/8"3/32"1/4"10°1 1/2"SM-61Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000000000000000
     

    Grinding Bits for Stainless Steel

    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Stainless Steel , Style 1.

    Style

    1

    Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel. They are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
    Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    Cylinder
    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Stainless Steel , Style 1.

    Style

    1

    Head
    Abrasive
    Style
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Shape
    No.
    Material
    Bond Material
    Shank
    Lg.
    Grit (Surface
    Texture)
    Each
    For Stainless Steel
     
    1/8" Diameter Shank
    13/32"1/4"105,000W142Aluminum OxideVitrified Ceramic1 1/2"120 (Smooth) Pink0000000000000
     

    CNC-Mount Burs for Cross-Drilled Holes

    Debur holes that intersect within your workpiece (cross holes) while protecting internal surfaces. With a ring around the cutting face, these burs slide toward cross holes without nicking or gouging walls along the way. The shanks are longer and thinner than standard burs, so these burs reach deep into workpieces while remaining flexible enough to clean up the entire edge of the hole. However, they’re still rigid enough that they won’t wobble as they rotate. The end of the shank can flex out as far as the bur's head diameter, but no further.
    Mount these burs in your CNC machines to debur material as part of your automated workflow. Like end mills, they fit into the CNC machine’s tool holder, so you can swap them out throughout the machining process. Alternatively, you can also attach these burs to electric rotary tools for manual deburring. However, they’re not compatible with air-powered tools. To avoid injury, don’t turn your tool on before you insert it into the bore of your workpiece.
    Half Ball with Protective Ring
    Image of ProductInUse. For Deburring L-Shaped Holes. Side1 orientation. Burs. CNC-Mount Burs for Cross-Drilled Holes, Half Ball with Protective Ring.
    Image of ProductInUse. For Deburring T-Shaped Holes. Side1 orientation. Burs. CNC-Mount Burs for Cross-Drilled Holes, Half Ball with Protective Ring.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. CNC-Mount Burs for Cross-Drilled Holes, Half Ball with Protective Ring, Single-Cut Tooth.

    For Deburring

    L-Shaped Holes

    For Deburring

    T-Shaped Holes

    Single-Cut Tooth

    Debur the front edges of cross holes. When these burs reach a hole’s opening, the protective ring slips into the hole, and the cutting face contacts the front edges. The protective ring also prevents damage to the cross hole's back wall if you insert the bur too far.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    For Use On
    Each
    Carbide
    0.03"3/32"1/16"2 1/2"Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000
     
    Bur Shank Adapters
    These shank adapters are required to adapt the bur’s extra-thin shank to a standard shank size for connecting to your tool holder or hand tool.
    For 1/8"
    Diameter Tool Shank
    For 1/4"
    Diameter Tool Shank
    For 3 mm Diameter
    Tool Shank
    For Max. Bur
    Shank Dia.
    Each
    Each
    Each
    0.03"000000000000000000000000000000000000000
    Ball with Protective Ring
    Image of ProductInUse. For Deburring Cross-Shaped Holes. Side1 orientation. Burs. CNC-Mount Burs for Cross-Drilled Holes, Ball with Protective Ring.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. CNC-Mount Burs for Cross-Drilled Holes, Ball with Protective Ring, Single-Cut Tooth.

    For Deburring

    Cross-Shaped Holes

    Single-Cut Tooth

    Debur the back and front edges of cross holes. Like the half-ball shape, the cutting face closest to the bur’s shank removes material from a cross hole’s front edges. The cutting face on the opposite side of the protective ring allows you to also debur the back edges of the hole.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    For Use On
    Each
    Carbide
    0.03"3/32"1/8"2 1/2"Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel00000000000000
     
    Bur Shank Adapters
    These shank adapters are required to adapt the bur’s extra-thin shank to a standard shank size for connecting to your tool holder or hand tool.
    For 1/8"
    Diameter Tool Shank
    For 1/4"
    Diameter Tool Shank
    For 3 mm Diameter
    Tool Shank
    For Max. Bur
    Shank Dia.
    Each
    Each
    Each
    0.03"000000000000000000000000000000000000000

    Extra-Long Burs

    Extend your reach with these 3" to 7 1/4” long burs.
    Cylinder with Round Tip
    Image of ProductInUse. Front orientation. Burs. Extra-Long Burs, Cylinder with Round Tip.
    Image of Product. Front orientation. Burs. Extra-Long Burs, Cylinder with Round Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Cylinder with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Cylinder with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round cylinder burs are for curved surfaces and slots and round-bottom holes and slots.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/8"3/32"7/16"3"SC-41L3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000000000000000000
     
    Tree with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Extra-Long Burs, Tree with Pointed Tip.
    Image of Product. Front orientation. Burs. Extra-Long Burs, Tree with Pointed Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Tree with Pointed Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Tree with Pointed Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Pointed tree burs are for curved surfaces and slots and curved holes with pointed bottoms.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/8"3/32"1/4"3"SG-61L3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000000000000000000
     
    Ball
    Image of ProductInUse. Front orientation. Burs. Extra-Long Burs, Ball.
    Image of Product. Front orientation. Burs. Extra-Long Burs, Ball.
    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Ball, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Ball, Single-Cut Tooth.

    Single-Cut Tooth

    Ball burs are for curved surfaces, round slots, and round-bottom holes.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/8"3/32"3/32"3"SD-61L3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000000000000000000
     
    Tapered Cone with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Extra-Long Burs, Tapered Cone with Pointed Tip.
    Image of Product. Front orientation. Burs. Extra-Long Burs, Tapered Cone with Pointed Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Tapered Cone with Pointed Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Tapered Cone with Pointed Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Pointed tapered cone burs are for tapered holes and slots with pointed bottoms.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/8"3/32"1/4"10°3"SM-61L3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000000000000000000
     
    back to top