McMaster-Carr logo
    Filter by
    System of Measurement
    Shank Diameter
    Attribute Image
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Shank Length
    Attribute Image
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    74 Products

    Grinding Bits for Metals

    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Metals, Style 1.
    Image of Product. Front orientation. ZoomedIn view. Contains Inset, Border. Grinding Bits. Grinding Bits for Metals, Style 7.
    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Metals, Style 23.

    Style

    1

    Style 7

    Style

    23

    Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.
    Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
    Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    Cylinder
    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Metals, Style 1.

    Style

    1

    Head
    Abrasive
    Style
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Shape
    No.
    Material
    Bond Material
    Shank
    Lg.
    Choose a Grit (Surface Texture)
    Pkg.
    Qty.
    Pkg.
    For Steel
     
    1/8" Diameter Shank
    15/16"1/16"107,400W165Aluminum OxideVitrified Ceramic1 1/2"100 (Smooth) Blue14522A34200000
    15/16"1/8"96,970W166Aluminum OxideVitrified Ceramic1 1/2"80 (Smooth) Blue14522A3430000
     
    For Steel, Stainless Steel, and Iron
     
    1/8" Diameter Shank
    15/16"3/8"61,650B134Aluminum OxideVitrified Clay1 1/2"46 (Rough) Blue-Gray, 60 (Rough) Orange, 120 (Smooth) Blue54522A1520000
    15/16"1/2"52,500W170Aluminum OxideVitrified Clay1 1/2"46 (Rough) Blue-Gray, 60 (Rough) Orange, 120 (Smooth) Blue54522A1240000
    15/16"3/4"37,120W171Aluminum OxideVitrified Clay1 1/2"46 (Rough) Blue-Gray, 60 (Rough) Orange, 120 (Smooth) Blue54522A1250000
     
    1/4" Diameter Shank
    15/16"1/2"81,000W170Aluminum OxideVitrified Clay1 1/2"46 (Rough) Blue-Gray, 60 (Rough) Orange, 120 (Smooth) Blue54522A2120000
     
    Disc
    Image of Product. Front orientation. ZoomedIn view. Contains Inset, Border. Grinding Bits. Grinding Bits for Metals, Style 7.

    Style 7

    Head
    Abrasive
    Style
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Shape
    No.
    Material
    Bond Material
    Shank
    Lg.
    Grit (Surface
    Texture)
    Pkg.
    Qty.
    Pkg.
    For Steel
     
    1/8" Diameter Shank
    75/16"3/16"105,000B84Aluminum OxideVitrified Ceramic1 1/2"80 (Smooth) Blue14522A33100000
     
    Inverted Cone
    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Metals, Style 23.

    Style

    23

    Head
    Abrasive
    Style
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Shape
    No.
    Material
    Bond Material
    Shank
    Lg.
    Choose a Grit (Surface Texture)
    Pkg.
    Qty.
    Pkg.
    For Steel, Stainless Steel, and Iron
     
    1/8" Diameter Shank
    235/16"3/8"68,400B104Aluminum OxideVitrified Clay1 1/2"46 (Rough) Blue-Gray, 60 (Rough) Orange, 120 (Smooth) Blue54522A182000000
     

    Burs

    Cylinder with Flat Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Cylinder with Flat Tip.
    Image of Product. Front orientation. Burs. Burs, Cylinder with Flat Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Single-Cut Tooth with Chip Breaker. Side1 orientation. ZoomedIn view. Burs. Burs, Cylinder with Flat Tip, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Cylinder with Flat Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Flat cylinder burs are for straight edges and flat surfaces.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Each
    Carbide
    1/4"5/16"3/4"2 1/2"SA-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4292A1030000009890N1200000043035A203000000
     
    Cylinder with Flat-Cutter Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Cylinder with Flat-Cutter Tip.
    Image of Product. Double-Cut Tooth. Front orientation. Burs. Burs, Cylinder with Flat-Cutter Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Single-Cut Tooth with Chip Breaker. Side1 orientation. ZoomedIn view. Burs. Burs, Cylinder with Flat-Cutter Tip, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Image of Product. Single-Cut Tooth. Front orientation. ZoomedIn view. Burs. Burs, Cylinder with Flat-Cutter Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Flat cutter cylinder burs are for straight edges, flat surfaces, and flat-bottom holes and slots.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Each
    Carbide
    1/4"5/16"3/4"2 1/2"SB-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4292A1120000009890N1600000043035A212000000
     
    Smooth Cylinder with Flat-Cutter Tip
    Image of ProductInUse. Side1 orientation. Burs. Burs, Smooth Cylinder with Flat-Cutter Tip.
    Image of Product. Front orientation. Burs. Burs, Smooth Cylinder with Flat-Cutter Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Debur surfaces without damaging internal holes or threads. With smooth sides and teeth only on the end, these burs are often used to flatten the top of broken bolts, so bits won't wobble as you drill holes to remove them.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    For Use On
    Each
    Carbide
    1/4"5/16"3/4"2 9/16"Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4241A213000000
     
    Smooth Cylinder with Pointed-Cutter Tip
    Image of ProductInUse. Side1 orientation. Burs. Burs, Smooth Cylinder with Pointed-Cutter Tip.
    Image of Product. Single-Cut Teeth Tip. Side1 orientation. ZoomedIn view. Burs. Burs, Smooth Cylinder with Pointed-Cutter Tip, Single-Cut Tooth.

    Single-Cut Teeth

    Tip

    With smooth sides and teeth only on the end, these burs prevent damage to internal holes while deburring. They’re often used to create a starter cone on broken bolts, improving drill alignment before extracting the bolt.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    For Use On
    Each
    Carbide
    1/4"5/16"3/16"150°2"Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4241A218000000
     
    Cylinder with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Cylinder with Round Tip.
    Image of Product. Front orientation. Burs. Burs, Cylinder with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Cylinder with Round Tip, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Cylinder with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round cylinder burs are for curved surfaces and slots and round-bottom holes and slots.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Each
    Carbide
    1/4"5/16"3/4"2 1/2"SC-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4292A1180000009890N2100000043035A218000000
     
    Tree with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Tree with Round Tip.
    Image of Product. Front orientation. Burs. Burs, Tree with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Tree with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round tree burs are for curved surfaces and slots and curved holes with rounded bottoms.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/4"5/16"5/8"2 3/8"SF-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel8175A9840000008175A985000000
     
    Tree with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Tree with Pointed Tip.
    Image of Product. Front orientation. Burs. Burs, Tree with Pointed Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Single-Cut Tooth with Chip Breaker. Side1 orientation. ZoomedIn view. Burs. Burs, Tree with Pointed Tip, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Tree with Pointed Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Pointed tree burs are for curved surfaces and slots and curved holes with pointed bottoms.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Each
    Carbide
    1/4"5/16"3/4"2 1/2"SG-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4292A1250000009890N3400000043035A225000000
     
    Ball
    Image of ProductInUse. Front orientation. Burs. Burs, Ball.
    Image of Product. Front orientation. Burs. Burs, Ball, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Ball, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Ball, Single-Cut Tooth.

    Single-Cut Tooth

    Ball burs are for curved surfaces, round slots, and round-bottom holes.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    High-Speed Steel—The choice for general purpose deburring on steel, though not as strong as carbide.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Each
    Carbide
    1/4"5/16"1/4"2"SD-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4292A33000009890N2500000043035A4400000
     
    High-Speed Steel
    1/4"5/16"5/16"2 1/16"—Steel———0———04238A1370000
     
    Flame
    Image of ProductInUse. Front orientation. Burs. Burs, Flame.
    Image of Product. Front orientation. Burs. Burs, Flame, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Flame, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Flame, Single-Cut Tooth.

    Single-Cut Tooth

    Flame burs are for contoured surfaces, slots, and holes.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Each
    Carbide
    1/4"5/16"3/4"2 1/2"SH-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4292A830000009890N3700000043035A72000000
     
    Oval
    Image of ProductInUse. Front orientation. Burs. Burs, Oval.
    Image of Product. Front orientation. Burs. Burs, Oval, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Oval, Single-Cut Tooth.

    Single-Cut Tooth

    Oval burs are for oblong slots and holes.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/4"5/16"5/8"2 3/8"SE-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4292A9640000004292A965000000
     
    Tapered Cone with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Tapered Cone with Round Tip.
    Image of Product. Front orientation. Burs. Burs, Tapered Cone with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Burs, Tapered Cone with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round tapered cone burs are for tapered holes and slots with rounded bottoms.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    High-Speed Steel—The choice for general purpose deburring on steel, though not as strong as carbide.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/4"5/16"7/8"14°2 3/4"SL-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4292A9100000043035A83000000
     
    High-Speed Steel
    1/4"5/16"5/8"18°2"—Steel———04238A1850000
    1/4"5/16"1 1/4"8°2 1/2"—Steel———04238A18600000
     
    Whisk
    Image of ProductInUse. Side1 orientation. Burs. Burs, Whisk.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Whisk, Single-Cut Tooth.

    Single-Cut Tooth

    Debur holes that intersect within your workpiece (cross holes). Made of flexible wire, these burs adjust to fit holes of various diameters.
    High-Speed Steel—The choice for general purpose deburring on steel, though not as strong as carbide.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    For Use On
    Each
    High-Speed Steel
    1/8"5/16"1 3/16"4"Steel, Hardened Steel, Tool Steel, Stainless Steel9978N14000000
     

    Rubber-Cushioned Abrasive Grinding Bits for Metals

    Image of Product. Bottom orientation. Grinding Bits. Rubber-Cushioned Abrasive Grinding Bits for Metals, Style 3.

    Style

    3

    The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits. Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
    Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    Inverted Cone
    Image of Product. Bottom orientation. Grinding Bits. Rubber-Cushioned Abrasive Grinding Bits for Metals, Style 3.

    Style

    3

    For Steel—Bits for steel are aluminum oxide, which is the most common abrasive used in grinding metal.
    For Aluminum, For Brass, and For Bronze—Bits for aluminum, brass, and bronze are silicon carbide, which cuts through soft metals without generating much heat or causing material buildup.
    Head
    Abrasive
    Style
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Shape
    No.
    Material
    Bond
    Material
    Shank
    Lg.
    Choose a Grit (Surface Texture)
    Each
    For Steel
     
    1/8" Diameter Shank
    35/16"3/8"68,400B104Aluminum OxideRubber
    		1 1/2"46 (Rough) Brown, 70 (Smooth) Black, 120 (Smooth) Green, 180 (Smooth) Red4919A325000000
     
    For Aluminum, Brass, and Bronze
     
    1/8" Diameter Shank
    35/16"3/8"68,400B104Silicon CarbideRubber
    		1 1/2"46 (Rough) Brown, 90 (Smooth) Black, 120 (Smooth) Green, 240 (Extra Smooth) Red4919A93100000
     

    Long-Life Burs

    A titanium aluminum nitride (TiAlN) coating provides heat and wear resistance for longer life.
    Cylinder with Flat Tip
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Cylinder with Flat Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Cylinder with Flat Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Cylinder with Flat Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Flat cylinder burs are for straight edges and flat surfaces.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/4"5/16"3/4"2 1/2"SA-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4290A1060000004290A218000000
     
    Cylinder with Flat-Cutter Tip
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Cylinder with Flat-Cutter Tip.
    Image of Product. Double-Cut Tooth. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Cylinder with Flat-Cutter Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Flat cutter cylinder burs are for straight edges, flat surfaces, and flat-bottom holes and slots.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/4"5/16"3/4"2 1/2"SB-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4290A618000000
     
    Cylinder with Round Tip
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Cylinder with Round Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Cylinder with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Cylinder with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round cylinder burs are for curved surfaces and slots and round-bottom holes and slots.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/4"5/16"3/4"2 1/2"SC-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4290A1170000004290A172000000
     
    Tree with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Tree with Pointed Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Tree with Pointed Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Tree with Pointed Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Pointed tree burs are for curved surfaces and slots and curved holes with pointed bottoms.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/4"5/16"3/4"2 1/2"SG-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4290A1340000004290A178000000
     
    Ball
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Ball.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Ball, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Ball, Single-Cut Tooth.

    Single-Cut Tooth

    Ball burs are for curved surfaces, round slots, and round-bottom holes.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/4"5/16"5/16"2 1/16"SD-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4290A7650000004290A766000000
     
    Flame
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Flame.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Flame, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Flame, Single-Cut Tooth.

    Single-Cut Tooth

    Flame burs are for contoured surfaces, slots, and holes.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/4"5/16"3/4"2 1/2"SH-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4290A740000004290A64000000
     
    Tapered Cone with Round Tip
    Image of ProductInUse. Front orientation. Burs. Long-Life Burs, Tapered Cone with Round Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Tapered Cone with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Long-Life Burs, Tapered Cone with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round tapered cone burs are for tapered holes and slots with rounded bottoms.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1/4"5/16"7/8"14°2 3/4"SL-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4290A1610000004290A724000000
     

    Grinding Bits for Nonmetals

    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Nonmetals, Style 3.

    Style

    3

    Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.
    Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
    Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    Cone
    Image of Product. Front orientation. Grinding Bits. Grinding Bits for Nonmetals, Style 3.

    Style

    3

    Head
    Style
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Abrasive
    Material
    Shank
    Lg.
    Grit (Surface
    Texture)
    Each
    For Composites, Fiberglass, Plaster, Plastic, Rubber, and Wood
     
    1/8" Diameter Shank
    35/16"21/32"20,000Tungsten Carbide7/8"80 (Rough) Bronze4931A59000000
    35/16"11/16"20,000Tungsten Carbide7/8"36 (Rough) Bronze4931A3300000
     

    Burs for Wood and Rubber

    Pointed teeth cut wood and rubber quickly without clogging.
    Cylinder with Round Tip
    Image of Product. Front orientation. Burs. Burs for Wood and Rubber, Cylinder with Round Tip.
    Round cylinder burs are for curved surfaces and slots and round-bottom holes and slots.
    Head
    Pointed Tooth
    (Coarse Grit)
    Pointed Tooth
    (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    For Use On
    Max. Rotation
    Speed, rpm
    Color
    Each
    Each
    Carbide
    1/4"5/16"1 3/4"3"Wood, Rubber25,000Blue———04257A79000000
    1/4"5/16"1 3/4"3"Wood, Rubber25,000Red4257A49000000———0
     
    Tapered Cone with Round Tip
    Image of Product. Front orientation. Burs. Burs for Wood and Rubber, Tapered Cone with Round Tip.
    Round tapered cone burs are for tapered holes and slots with rounded bottoms.
    Head
    Pointed Tooth
    (Coarse Grit)
    Pointed Tooth
    (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    For Use On
    Max. Rotation
    Speed, rpm
    Color
    Each
    Each
    Carbide
    1/4"5/16"1 1/2"15°2 13/16"Wood, Rubber25,000Blue———04257A68000000
    1/4"5/16"1 1/2"15°2 13/16"Wood, Rubber25,000Red4257A38000000———0
     

    Miniature Grinding Bits for Metals

    Image of Product. Front orientation. Grinding Bits. Miniature Grinding Bits for Metals , Style 2.

    Style

    2

    The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.
    Bits are aluminum oxide, which is the most common abrasive used in grinding metal. They are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
    Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    Disc
    Image of Product. Front orientation. Grinding Bits. Miniature Grinding Bits for Metals , Style 2.

    Style

    2

    Head
    Abrasive
    Style
    Dia.
    Lg.
    Max. Rotation
    Speed, rpm
    Material
    Bond Material
    Shank
    Lg.
    Grit (Surface Texture)
    Each
    For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, and Titanium
     
    3/32" Diameter Shank
    25/16"1/32"35,000Aluminum OxideVitrified Clay1 1/2"120 (Smooth) Red4407A5700000
    25/16"1/32"35,000Aluminum OxideVitrified Clay1 1/2"400 (Extra Smooth) White4407A770000
     

    Extra-Long Burs

    Extend your reach with these 3" to 7 1/4” long burs.
    Cylinder with Flat Tip
    Image of ProductInUse. Front orientation. Burs. Extra-Long Burs, Cylinder with Flat Tip.
    Image of Product. Front orientation. Burs. Extra-Long Burs, Cylinder with Flat Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Cylinder with Flat Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Cylinder with Flat Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Flat cylinder burs are for straight edges and flat surfaces.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/4"5/16"3/4"6 3/4"SA-2L6Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4324A6350000004324A636000000
     
    Cylinder with Round Tip
    Image of ProductInUse. Front orientation. Burs. Extra-Long Burs, Cylinder with Round Tip.
    Image of Product. Front orientation. Burs. Extra-Long Burs, Cylinder with Round Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Cylinder with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Cylinder with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round cylinder burs are for curved surfaces and slots and round-bottom holes and slots.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/4"5/16"3/4"6 3/4"SC-2L6Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4324A2180000004324A219000000
     
    Ball
    Image of ProductInUse. Front orientation. Burs. Extra-Long Burs, Ball.
    Image of Product. Front orientation. Burs. Extra-Long Burs, Ball.
    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Ball, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Ball, Single-Cut Tooth.

    Single-Cut Tooth

    Ball burs are for curved surfaces, round slots, and round-bottom holes.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/4"5/16"1/4"6 1/4"SD-2L6Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4313A9170000004313A918000000
     
    Flame
    Image of ProductInUse. Front orientation. Burs. Extra-Long Burs, Flame.
    Image of Product. Front orientation. Burs. Extra-Long Burs, Flame.
    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Flame, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Flame, Single-Cut Tooth.

    Single-Cut Tooth

    Flame burs are for contoured surfaces, slots, and holes.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/4"5/16"3/4"6 3/4"SH-2L6Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4324A410000004324A94000000
     
    Tapered Cone with Round Tip
    Image of ProductInUse. Front orientation. Burs. Extra-Long Burs, Tapered Cone with Round Tip.
    Image of Product. Front orientation. Burs. Extra-Long Burs, Tapered Cone with Round Tip.
    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Tapered Cone with Round Tip, Double-Cut Tooth.

    Double-Cut Tooth

    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs, Tapered Cone with Round Tip, Single-Cut Tooth.

    Single-Cut Tooth

    Round tapered cone burs are for tapered holes and slots with rounded bottoms.
    Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
    Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
    Head
    Double-Cut Tooth
    (Medium Grit)
    Single-Cut
    Tooth (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Each
    Carbide
    1/4"5/16"1"14°7"SL-2L6Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel4324A1210000004324A122000000
     

    Burs for Masonry, Ceramics, and Composites

    Diamond-cut teeth effectively cut hard materials.
    Flame
    Image of ProductInUse. Flame. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Flame.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Flame, Diamond-Cut Tooth.

    Flame

    Diamond-Cut

    Tooth

    Flame burs are for contoured surfaces, slots, and holes.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"5/16"3/4"2 1/2"SH-2Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A28000000
     

    Burs for Soft Metals and Plastic

    Specially spaced flutes quickly remove materials such as aluminum, brass, bronze, and plastic without clogging.
    Flame
    Image of ProductInUse. Side1 orientation. Burs. Burs for Soft Metals and Plastic, Flame.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs for Soft Metals and Plastic, Flame, Fluted Tooth.

    Fluted Tooth

    Flame burs are for contoured surfaces, slots, and holes.
    Head
    Fluted Tooth
    (Medium Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"5/16"3/4"2 1/2"SH-2Aluminum, Copper, Brass, Bronze, Plastic4295A113000000
     

    Extra-Long Burs for Soft Metals and Plastic

    Get into tricky, hard-to-reach spots with these burs that are up to three times as long as standard burs for soft metals and plastic. Specially spaced flutes quickly remove materials such as aluminum, brass, bronze, and plastic without clogging.
    Flame
    Image of ProductInUse. Side1 orientation. Burs. Extra-Long Burs for Soft Metals and Plastic, Flame.
    Image of Product. Side1 orientation. Burs. Extra-Long Burs for Soft Metals and Plastic, Flame.
    Image of Product. Front orientation. ZoomedIn view. Burs. Extra-Long Burs for Soft Metals and Plastic, Flame, Fluted Tooth.

    Fluted Tooth

    Flame burs are for contoured surfaces, slots, and holes.
    Head
    Fluted Tooth
    (Medium Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"5/16"3/4"6 3/4"SH-2L6Aluminum, Copper, Brass, Bronze, Plastic9895N142000000
     
    back to top