Formed from multiple layers of compressed nylon mesh embedded with abrasive, these small-diameter wheels provide a cushioned grind. Also known as unified wheels.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Formed from multiple layers of compressed nylon mesh embedded with abrasive, these small-diameter wheels provide a cushioned grind. Also known as unified wheels.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Use these wheels to cut through metal such as iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels for heavy material removal in one spot or along a weld seam. They are also known as Type 1 wheels and snagging wheels.

Wheels are aluminum oxide, which is the most common abrasive used in grinding metal.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Wheels remove more material than other grinding wheels with cotton laminate.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 1 wheels and snagging wheels.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 1 wheels and snagging wheels.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel. Wheels are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

With less than 0.1% iron, chloride, and sulfur contaminants, these wheels prevent corrosion and discoloration on stainless steel. They’re made with an aluminum oxide abrasive and reinforced with two layers of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel nickel, Hastelloy nickel, and tool steel. Wheels are reinforced with a layer of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

These high-density ceramic or ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting iron, stainless steel, and steel.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

For quick cuts in stainless steel, run these high-density zirconia alumina wheels at a higher rpm than standard cutoff wheels. They’re reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.