Use these wheels for heavy material removal in one spot or along a weld seam. They are also known as Type 1 wheels and snagging wheels.

Wheels are aluminum oxide, which is the most common abrasive used in grinding metal.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Use these wheels to cut through metal such as iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

A good value for everyday use, these wheels offer an economical balance between heavy material removal and long life. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Wheels are aluminum oxide, which is the most common abrasive used in grinding metal. Use for grinding surfaces and removing weld seams. The _1/8" and _3/16" thick wheels can also be used for notching and cutting.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel. Wheels are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

A blend of ceramic alumina and zirconia alumina removes material at a 50% faster rate than our Long-Life Grinding Wheels. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Wheels are designed for grinding metal surfaces and removing weld seams. The _1/8" and _3/16" thick wheels can also be used for notching and cutting.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

These high-density ceramic or ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting iron, stainless steel, and steel.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Wheels remove more material than other grinding wheels with cotton laminate.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 1 wheels and snagging wheels.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

The combination of ceramic alumina and zirconia alumina in these wheels lasts up to ten times longer than aluminum oxide when cutting hard metal such as Inconel nickel, Hastelloy nickel, and tool steel. Wheels are reinforced with a layer of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

With less than 0.1% iron, chloride, and sulfur contaminants, these wheels prevent corrosion and discoloration on stainless steel. They’re made with an aluminum oxide abrasive and reinforced with two layers of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 1 wheels and snagging wheels.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in metal.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Wheels are a blend of aluminum oxide and zirconia alumina, which removes more material and lasts three times as long as our General Purpose Grinding Wheels. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Wheels are designed for grinding metal surfaces and removing weld seams. The _1/8" thick wheels can also be used for notching and cutting.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Use these clog-resistant zirconia alumina wheels to make quick cuts in soft metal such as aluminum, brass, and copper. Wheels are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

For quick cuts in stainless steel, run these high-density zirconia alumina wheels at a higher rpm than standard cutoff wheels. They’re reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.