Designed to stand up to heavy use, these wheels remove more material than our General Purpose Grinding Wheels.

Wheels are for grinding, deburring, and sharpening. They include one of each reducer bushing listed. The smallest bushing size shown is the smallest allowed for that size wheel.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Use these wheels for precision grinding on surface, cylindrical, and tool and cutter grinders. They are also known as Type 1 wheels and straight wheels.

Truing and cleaning before first use is recommended.

The abrasive-embedded mesh construction provides a cushioned grind. Also known as convolute wheels.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.

Truing and cleaning before first use is recommended.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramic, and glass.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Made with boron nitride, second only in hardness to diamond, these wheels are highly wear resistant, so they easily cut steel with a Rockwell hardness of C50 or greater, including alloy steel, A2, D2, and T15 tool steel. While these wheels are not as hard as wheels made with diamond, they dissipate heat better.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make burr-free cuts in hard or thick materials, such as metal pipes, bars, and sheets. Made with bonded abrasives, these wheels are designed to slice through metal more quickly than other saw blades. They’re not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Create the nearly polished finish required for testing metal with these non-reinforced aluminum oxide wheels. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Prevent clogging and smearing when sanding soft materials. The abrasive won’t trap particles, so these discs stay sharp longer. Press them onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Spend more time sanding and less time replacing clogged discs. A slick coating prevents dust and debris buildup on the abrasive surface. Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.