Clear All
For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
Grit Grit |
|---|
|
|
For Use With For Use With |
|---|
|
Abrasive Material Abrasive Material |
|---|
|
Surface Texture Surface Texture |
|---|
|
Wheel Shape Wheel Shape |
|---|
|
|
Maximum Speed Maximum Speed |
|---|
|
Abrasive Surface Abrasive Surface |
|---|
|
Arbor Hole Arbor Hole |
|---|
|
Arbor Hole Shape Arbor Hole Shape |
|---|
 | Round |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Head Diameter Head Diameter |
|---|
Abrasive Bond Material Abrasive Bond Material |
|---|
|
About Sanding Abrasives
More
Bench and Pedestal Grinding Wheels for Carbide, Ceramics, and Glass
Edge
Partial Face
Full Face
The perforated honeycomb pattern cuts carbide, ceramics, and glass without the need for cleaning.
Wheels are made of diamond-coated steel molded onto plastic, so they can be used wet or dry. Diamond is extremely hard and wear resistant.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Wheel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Abrasive Surface | Dia. | Thick. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Type | Shape | Choose a Grit (Surface Texture, Coor) | Each | |
For Carbide, Ceramics, Glass | ||||||||||
Unthreaded Arbor Hole | ||||||||||
| Edge | 6" | 3/4" | 1 1/4" | 3,820 | Diamond | Type 1 | Straight | 0000000 | 0000000 | |
| Edge | 6" | 1" | 1 1/4" | 3,820 | Diamond | Type 1 | Straight | 0000000 | 000000 | |
| Partial Face | 6" | 3/4" | 1 1/4" | 3,820 | Diamond | Type 2 | Cylinder | 0000000 | 000000 | |
| Full Face | 6" | 1/2" | 1/2" | 3,820 | Diamond | Type 1 | Straight | 0000000 | 000000 | |
Shaped Norton Toolroom Grinding Wheels for Metals
Flared Cup
The special shapes of these wheels provide more clearance than typical straight wheels.
5SG blue wheels are for heavy material removal. They are ceramic aluminum oxide, which lasts up to five times as long as 32A wheels.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Wheel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Grit (Surface Texture) | Norton Abrasive Grade | Each | |
5SG Blue—VS Bond | |||||||||||
For Aluminum, Brass, Bronze, Carbides, Ceramics, Composites, Copper, Fiberglass, Glass, Plaster, Plastic, Rubber, Stone, Titanium | |||||||||||
| 4" | 1 1/2" | 1 1/4" | 5,730 | Ceramic Alumina | Vitrified Clay | Type 11 | Flared Cup | 60 (Rough) | L | 00000000 | 000000 |
| 4" | 1 1/2" | 1 1/4" | 5,730 | Ceramic Alumina | Vitrified Clay | Type 11 | Flared Cup | 80 (Smooth) | J | 000000000 | 00000 |
Toolroom Grinding Wheels for Carbide, Ceramics, and Glass
Flared Cup
Straight
Straight Cup
A nickel-coated diamond grit and synthetic resin bond make these wheels extremely hard and wear resistant.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Wheel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Diamond Wd. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Abrasive Surface | Color | Choose a Grit (Surface Texture) | Each | |
For Carbide, Ceramics, Glass | |||||||||||||
Unthreaded Arbor Hole | |||||||||||||
| 3 3/4" | 1 1/2" | 1/16" | 1 1/4" | 9,675 | Diamond | Synthetic Resin | Type 11 | Flared Cup | Partial Face | Silver | 00000000 | 0000000 | |
| 3 3/4" | 1 1/2" | 1/8" | 1 1/4" | 9,675 | Diamond | Synthetic Resin | Type 11 | Flared Cup | Partial Face | Silver | 00000000 | 000000 | |
| 4" | 1/8" | 1/8" | 1 1/4" | 9,050 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 4" | 1/4" | 1/8" | 1 1/4" | 9,050 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 5" | 1 3/4" | 1/8" | 1 1/4" | 7,250 | Diamond | Synthetic Resin | Type 11 | Flared Cup | Partial Face | Silver | 00000000 | 000000 | |
| 6" | 1/8" | 1/8" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 6" | 1/4" | 1/8" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 6" | 3/8" | 1/8" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 6" | 1/2" | 1/8" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 6" | 3/4" | 1/16" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 6 | Straight Cup | Partial Face | Silver | 00000000 | 000000 | |
| 6" | 3/4" | 1/8" | 1 1/4" | 6,025 | Diamond | Synthetic Resin | Type 6 | Straight Cup | Partial Face | Silver | 00000000 | 000000 | |
| 7" | 1/8" | 1/8" | 1 1/4" | 5,175 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 7" | 1/4" | 1/8" | 1 1/4" | 5,175 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 7" | 3/8" | 1/8" | 1 1/4" | 5,175 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
| 7" | 1/2" | 1/8" | 1 1/4" | 5,175 | Diamond | Synthetic Resin | Type 1 | Straight | Edge | Silver | 00000000 | 000000 | |
Long-Life Grinding Bits for Nonmetals
1
2
3
4
5
6
8
7
The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.
Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape | Abrasive Material | O'all Lg. | Grit (Surface Texture) | Each | ||
For Carbide, Ceramics, Glass | |||||||||
1/8" Shank Dia. | |||||||||
| 1 | 0.03" | 0.08" | 100,000 | Cylindrical | Diamond | 2 1/4" | 220 (Extra Smooth) Silver | 0000000 | 000000 |
| 1 | 0.03" | 0.19" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.04" | 0.08" | 100,000 | Cylindrical | Diamond | 2 1/4" | 220 (Extra Smooth) Silver | 0000000 | 00000 |
| 1 | 0.04" | 0.19" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.05" | 0.08" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.05" | 0.19" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.06" | 0.12" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.06" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.07" | 0.12" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.08" | 0.16" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.08" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.09" | 0.16" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.1" | 0.16" | 100,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.11" | 0.16" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.12" | 0.16" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.13" | 0.2" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.13" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.14" | 0.2" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.16" | 0.2" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.16" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.19" | 0.31" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.25" | 0.31" | 46,500 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.31" | 0.31" | 46,500 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.25" | 0.03" | 46,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.25" | 0.06" | 46,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 2 | 0.25" | 0.13" | 46,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 3 | 0.06" | 1/4" | 96,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 3 | 0.13" | 1/4" | 96,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 3 | 0.25" | 0.31" | 46,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 3 | 0.31" | 0.31" | 46,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 4 | 0.14" | 0.31" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 5 | 0.06" | 0.31" | 96,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 5 | 0.08" | 0.31" | 96,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 5 | 0.11" | 0.31" | 96,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 6 | 0.16" | 0.23" | 96,000 | Taper | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 6 | 0.17" | 0.14" | 96,000 | Taper | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 6 | 0.19" | 0.38" | 96,000 | Taper | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.06" | 0.06" | 96,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.09" | 0.09" | 96,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.13" | 0.13" | 96,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.19" | 0.19" | 96,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.25" | 1/4" | 46,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.38" | 0.38" | 46,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
1/4" Shank Dia. | |||||||||
| 1 | 0.06" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.09" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.13" | 1/4" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.19" | 0.31" | 96,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.2" | 0.24" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.24" | 0.28" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.25" | 0.31" | 46,500 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.26" | 0.28" | 60,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.31" | 0.31" | 46,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.32" | 0.32" | 30,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.34" | 0.32" | 30,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.38" | 0.31" | 46,500 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.39" | 0.39" | 30,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.5" | 0.31" | 30,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.59" | 0.39" | 20,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 1 | 0.73" | 0.39" | 20,000 | Cylindrical | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 3 | 0.38" | 0.31" | 46,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 3 | 0.5" | 0.31" | 30,000 | Barrel | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
| 7 | 0.19" | 0.1" | 18,600 | Flat-Top Cone | Diamond | 2" | 120 (Smooth) Silver | 0000000 | 00000 |
| 7 | 0.25" | 0.1" | 18,600 | Flat-Top Cone | Diamond | 2" | 120 (Smooth) Silver | 0000000 | 00000 |
| 7 | 0.5" | 0.2" | 30,000 | Flat-Top Cone | Diamond | 2" | 120 (Smooth) Silver | 0000000 | 00000 |
| 8 | 0.5" | 1/2" | 30,000 | Ball | Diamond | 2 1/4" | 120 (Smooth) Silver | 0000000 | 00000 |
Flap Sanding Discs for Masonry, Ceramics, and Composites
Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes. As the top layer of abrasive wears away, a new layer is exposed. Attach to your tool’s arbor.
For technical drawings and 3-D models, click on a part number.
Angled Flap Discs with Unthreaded Arbor Hole—For Rough Finish
Angled
| Dia. | Arbor Hole Dia. | Industry Designation | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | Backing Plate Material | For Use On | For Use With | Grit | Each | |
| 4" | 5/8" | Type 29 | 15,300 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 80 | 00000000 | 000000 |
| 4 1/2" | 7/8" | Type 29 | 13,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 80 | 00000000 | 00000 |
| 5" | 7/8" | Type 29 | 12,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 80 | 00000000 | 00000 |
| 7" | 7/8" | Type 29 | 8,600 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 80 | 00000000 | 00000 |
Angled Flap Discs with Unthreaded Arbor Hole—For Smooth Finish
Angled
| Dia. | Arbor Hole Dia. | Industry Designation | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | Backing Plate Material | For Use On | For Use With | Choose a Grit | Each | |
| 4" | 5/8" | Type 29 | 15,300 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 00000000 | 000000 | |
| 4 1/2" | 7/8" | Type 29 | 13,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 00000000 | 00000 | |
| 5" | 7/8" | Type 29 | 12,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 00000000 | 00000 | |
| 7" | 7/8" | Type 29 | 8,600 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 220 | 00000000 | 00000 |
Angled Flap Discs with Unthreaded Arbor Hole—For Extra Smooth Finish
Angled
| Dia. | Arbor Hole Dia. | Industry Designation | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | Backing Plate Material | For Use On | For Use With | Grit | Each | |
| 4" | 5/8" | Type 29 | 15,300 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 320 | 00000000 | 000000 |
| 4 1/2" | 7/8" | Type 29 | 13,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 320 | 00000000 | 00000 |
| 5" | 7/8" | Type 29 | 12,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 320 | 00000000 | 00000 |
Angled Flap Discs with Unthreaded Arbor Hole—For Polished Finish
Angled
| Dia. | Arbor Hole Dia. | Industry Designation | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | Backing Plate Material | For Use On | For Use With | Grit | Each | |
| 4" | 5/8" | Type 29 | 15,300 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 600 | 00000000 | 000000 |
| 5" | 7/8" | Type 29 | 12,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 600 | 00000000 | 00000 |
| 7" | 7/8" | Type 29 | 8,600 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 600 | 00000000 | 00000 |
Angled Flap Discs with Threaded Arbor Hole—For Rough Finish
Angled
| Dia. | Arbor Hole Thread Size | Industry Designation | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | Backing Plate Material | For Use On | For Use With | Grit | Each | |
| 4 1/2" | 5/8"-11 | Type 29 | 13,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 80 | 00000000 | 000000 |
| 5" | 5/8"-11 | Type 29 | 12,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 80 | 00000000 | 00000 |
| 7" | 5/8"-11 | Type 29 | 8,600 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 80 | 00000000 | 00000 |
Angled Flap Discs with Threaded Arbor Hole—For Smooth Finish
Angled
| Dia. | Arbor Hole Thread Size | Industry Designation | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | Backing Plate Material | For Use On | For Use With | Choose a Grit | Each | |
| 4 1/2" | 5/8"-11 | Type 29 | 13,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 00000000 | 000000 | |
| 5" | 5/8"-11 | Type 29 | 12,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 00000000 | 00000 | |
| 7" | 5/8"-11 | Type 29 | 8,600 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 00000000 | 00000 |
Angled Flap Discs with Threaded Arbor Hole—For Extra Smooth Finish
Angled
| Dia. | Arbor Hole Thread Size | Industry Designation | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | Backing Plate Material | For Use On | For Use With | Grit | Each | |
| 4 1/2" | 5/8"-11 | Type 29 | 13,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 320 | 00000000 | 000000 |
| 5" | 5/8"-11 | Type 29 | 12,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 320 | 00000000 | 00000 |
| 7" | 5/8"-11 | Type 29 | 8,600 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 320 | 00000000 | 00000 |
Angled Flap Discs with Threaded Arbor Hole—For Polished Finish
Angled
| Dia. | Arbor Hole Thread Size | Industry Designation | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | Backing Plate Material | For Use On | For Use With | Grit | Each | |
| 4 1/2" | 5/8"-11 | Type 29 | 13,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 600 | 00000000 | 000000 |
| 5" | 5/8"-11 | Type 29 | 12,000 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 600 | 00000000 | 00000 |
| 7" | 5/8"-11 | Type 29 | 8,600 | Silicon Carbide | Cloth | Fiberglass | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 600 | 00000000 | 00000 |
Quick-Change Sanding Discs for Masonry, Ceramics, and Composites
These discs have a long-lasting diamond abrasive. A special fastener on the back allows you to easily swap one disc for another. Choose the fastener style that matches your tool or backup pad.
For technical drawings and 3-D models, click on a part number.
Quick-Change Fastener Style B
| Dia. | Manufacturer Equivalent Model | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | For Use On | Grit | Each | |
Quick-Change Fastener Style B | ||||||||
|---|---|---|---|---|---|---|---|---|
For Rough Finish | ||||||||
| 2" | 3M Roloc, Norton Speed-Lok TR | 30,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 60 | 0000000 | 000000 |
| 3" | 3M Roloc, Norton Speed-Lok TR | 20,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 60 | 0000000 | 00000 |
For Smooth Finish | ||||||||
| 2" | 3M Roloc, Norton Speed-Lok TR | 30,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 120 | 0000000 | 00000 |
| 2" | 3M Roloc, Norton Speed-Lok TR | 30,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 150 | 0000000 | 00000 |
| 3" | 3M Roloc, Norton Speed-Lok TR | 20,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 120 | 0000000 | 00000 |
| 3" | 3M Roloc, Norton Speed-Lok TR | 20,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 150 | 0000000 | 00000 |
For Extra Smooth Finish | ||||||||
| 2" | 3M Roloc, Norton Speed-Lok TR | 30,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 400 | 0000000 | 00000 |
| 3" | 3M Roloc, Norton Speed-Lok TR | 20,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 400 | 0000000 | 00000 |
For Polished Finish | ||||||||
| 2" | 3M Roloc, Norton Speed-Lok TR | 30,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 800 | 0000000 | 00000 |
| 2" | 3M Roloc, Norton Speed-Lok TR | 30,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 1800 | 0000000 | 00000 |
| 3" | 3M Roloc, Norton Speed-Lok TR | 20,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 800 | 0000000 | 00000 |
| 3" | 3M Roloc, Norton Speed-Lok TR | 20,000 | Diamond | Cloth | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | 1800 | 0000000 | 00000 |
Arbor-Mount Sanding Discs for Masonry, Ceramics, and Composites
Fit these discs over your tool's arbor. They don't require a backup pad.
For technical drawings and 3-D models, click on a part number.
| Dia. | Arbor Hole Dia. | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | For Use On | For Use With | Choose a Grit | Each | |
Unthreaded Arbor Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For Rough Finish | |||||||||
| 4 1/2" | 7/8" | 13,300 | Silicon Carbide | Rubber | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 0000000 | 000000 | |
| 5" | 7/8" | 12,000 | Silicon Carbide | Rubber | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 0000000 | 00000 | |
| 7" | 7/8" | 8,500 | Silicon Carbide | Rubber | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Angle Grinders | 0000000 | 00000 | |
Adhesive-Back Sanding Discs for Masonry, Ceramics, and Composites
These discs have a long-lasting diamond abrasive. Press onto a compatible sanding tool or backup pad (sold separately); peel off to remove. Also known as PSA discs. To maintain strong adhesion, clean the pad surface with mild alcohol before applying. Do not use aggressive cleaning solvents such as MEK or acetone, which can damage the adhesive.
For technical drawings and 3-D models, click on a part number.
| Dia. | Abrasive Material | Abrasive Backing Material | For Use On | For Use With | Grit | Each | |
For Rough Finish | |||||||
|---|---|---|---|---|---|---|---|
| 2" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Grinders for Bits and Burs, Portable Disc Sanders | 60 | 00000000 | 000000 |
| 5" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 60 | 00000000 | 000000 |
| 6" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 60 | 00000000 | 000000 |
| 8" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 60 | 00000000 | 000000 |
For Smooth Finish | |||||||
| 2" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Grinders for Bits and Burs, Portable Disc Sanders | 120 | 00000000 | 00000 |
| 2" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Grinders for Bits and Burs, Portable Disc Sanders | 150 | 00000000 | 00000 |
| 5" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 120 | 00000000 | 000000 |
| 5" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 150 | 00000000 | 00000 |
| 6" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 120 | 00000000 | 000000 |
| 6" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 150 | 00000000 | 000000 |
| 8" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 120 | 00000000 | 000000 |
| 8" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 150 | 00000000 | 000000 |
For Extra Smooth Finish | |||||||
| 2" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Grinders for Bits and Burs, Portable Disc Sanders | 400 | 00000000 | 00000 |
| 5" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 400 | 00000000 | 00000 |
| 6" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 400 | 00000000 | 000000 |
| 8" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 400 | 00000000 | 000000 |
For Polished Finish | |||||||
| 2" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Grinders for Bits and Burs, Portable Disc Sanders | 800 | 00000000 | 00000 |
| 2" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Grinders for Bits and Burs, Portable Disc Sanders | 1500 | 00000000 | 00000 |
| 5" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 800 | 00000000 | 00000 |
| 5" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 1500 | 00000000 | 00000 |
| 6" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 800 | 00000000 | 000000 |
| 6" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 1500 | 00000000 | 000000 |
| 8" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 800 | 00000000 | 000000 |
| 8" | Diamond | Plastic | Ceramics, Brick, Stone, Concrete, Glass, Carbon Fiber, Graphite, Fiberglass | Portable Disc Sanders, Stationary Disc Sanders | 1500 | 00000000 | 000000 |
Burs for Masonry, Ceramics, and Composites
Diamond-cut teeth effectively cut hard materials.
Flat Cylinder—For straight edges and flat surfaces.
Flat Cutter Cylinder—For straight edges, flat surfaces, and flat-bottom holes and slots.
Rounded Cylinder—For curved surfaces and slots and round-bottom holes and slots.
Rounded Tree—For curved surfaces and slots and curved holes with rounded bottoms.
Pointed Tree—For curved surfaces and slots and curved holes with pointed bottoms.
Ball—For curved surfaces, round slots, and round-bottom holes.
Flame—For contoured surfaces, slots, and holes.
Oval/Egg—For oblong slots and holes.
Cone—For beveled edges and countersunk holes.
Inverted Cone—For inverted-angle holes and dovetailed slots.
Rounded Tapered Cone—For tapered holes and slots with rounded bottoms.
Pointed Tapered Cone—For tapered holes and slots with pointed bottoms.
For technical drawings and 3-D models, click on a part number.
Flat Cylinder
Flat Cylinder
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | ||||||
|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | |||||||
| 1/4" | 1/4" | 5/8" | 2" | SA-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 000000 |
| 1/4" | 3/8" | 3/4" | 2 1/2" | SA-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
| 1/4" | 1/2" | 1" | 2 3/4" | SA-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
Flat Cutter Cylinder
Flat Cutter Cylinder
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | ||||||
|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | |||||||
| 1/4" | 1/4" | 5/8" | 2" | SB-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 000000 |
| 1/4" | 3/8" | 3/4" | 2 1/2" | SB-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
| 1/4" | 1/2" | 1" | 2 3/4" | SB-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
Rounded Cylinder
Rounded Cylinder
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | ||||||
|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | |||||||
| 1/4" | 1/4" | 5/8" | 2" | SC-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 000000 |
| 1/4" | 3/8" | 3/4" | 2 1/2" | SC-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
| 1/4" | 1/2" | 1" | 2 3/4" | SC-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
Rounded Tree
Rounded Tree
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | ||||||
|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | |||||||
| 1/4" | 1/4" | 5/8" | 2" | SF-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 000000 |
| 1/4" | 3/8" | 3/4" | 2 1/2" | SF-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
| 1/4" | 1/2" | 1" | 2 3/4" | SF-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
Pointed Tree
Pointed Tree
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | ||||||
|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | |||||||
| 1/4" | 1/4" | 5/8" | 2" | SG-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 000000 |
| 1/4" | 3/8" | 3/4" | 2 1/2" | SG-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
| 1/4" | 1/2" | 1" | 2 3/4" | SG-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
Ball
Ball
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | ||||||
|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | |||||||
| 1/4" | 1/4" | 7/32" | 2" | SD-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 000000 |
| 1/4" | 3/8" | 5/16" | 2 1/8" | SD-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
| 1/4" | 1/2" | 7/16" | 2 1/4" | SD-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
Flame
Flame
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | ||||||
|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | |||||||
| 1/4" | 1/4" | 1/2" | 2" | SH-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 000000 |
| 1/4" | 5/16" | 3/4" | 2 1/2" | SH-2 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
| 1/4" | 1/2" | 1 1/4" | 3" | SH-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 0000000 | 00000 |
Oval/Egg
Oval/Egg
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | ||||||
|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | |||||||
| 1/4" | 1/4" | 3/8" | 2" | SE-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 000000 |
| 1/4" | 3/8" | 5/8" | 2 3/8" | SE-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
| 1/4" | 1/2" | 7/8" | 2 5/8" | SE-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
Cone
Cone
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | |||||||
|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Tip Angle | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | ||||||||
| 1/4" | 1/4" | 1/8" | 90° | 2" | SK-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 000000 |
| 1/4" | 1/4" | 3/16" | 60° | 2" | SJ-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
| 1/4" | 3/8" | 3/16" | 90° | 1 15/16" | SK-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
| 1/4" | 3/8" | 5/16" | 60° | 2 1/16" | SJ-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
| 1/4" | 1/2" | 1/4" | 90° | 2" | SK-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
| 1/4" | 1/2" | 7/16" | 60° | 2 3/16" | SJ-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
Inverted Cone
Inverted Cone
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | |||||||
|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Tip Angle | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | ||||||||
| 1/4" | 1/4" | 5/16" | 10° | 2" | SN-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 000000 |
| 1/4" | 3/8" | 3/8" | 15° | 2 1/8" | SN-2 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
| 1/4" | 1/2" | 1/2" | 12° | 2 1/4" | SN-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
Rounded Tapered Cone
Rounded Tapered Cone
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | |||||||
|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Tip Angle | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | ||||||||
| 1/4" | 1/4" | 5/8" | 14° | 2" | SL-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 000000 |
| 1/4" | 3/8" | 1 1/16" | 14° | 2 13/16" | SL-3 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
| 1/4" | 1/2" | 1 1/8" | 14° | 2 7/8" | SL-4 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
Pointed Tapered Cone
Pointed Tapered Cone
Diamond Cut
Head | Diamond Cut (For Extra Fine Finish) | |||||||
|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Dia. | Lg. | Tip Angle | Overall Lg. | Bur Trade Number | For Use On | Each | |
Carbide | ||||||||
| 1/4" | 1/4" | 1/2" | 22° | 2" | SM-1 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 000000 |
| 1/4" | 3/8" | 5/8" | 28° | 2 1/2" | SM-4 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
| 1/4" | 1/2" | 7/8" | 28° | 2 5/8" | SM-5 | Ceramics, Brick, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite | 00000000 | 00000 |
Bench Grinder Cutoff Wheels for Carbide, Ceramics, and Glass
Side View
These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.
For technical drawings and 3-D models, click on a part number.
Wheel | Material | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Thick. | Arbor Hole Size | Max. Speed, rpm | Type | Shape | Abrasive | Body | Grit | Each | |
4" Dia. | |||||||||
| 0.035" | 1 1/4" | 15,275 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 0000000 |
6" Dia. | |||||||||
| 0.035" | 1 1/4" | 10,175 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 000000 |
7" Dia. | |||||||||
| 0.04" | 1 1/4" | 8,725 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 000000 |
8" Dia. | |||||||||
| 0.04" | 1 1/4" | 7,625 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 000000 |
10" Dia. | |||||||||
| 0.05" | 1 1/4" | 6,100 | Type 1 | Straight | Diamond | Steel | 100 | 0000000 | 000000 |