Shaped Norton Toolroom Grinding Wheels for Metals
The special shapes of these wheels provide more clearance than typical straight wheels.
5SG blue wheels are for heavy material removal. They are ceramic aluminum oxide, which lasts up to five times as long as 32A wheels.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Wheel | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Thick. | Arbor Hole Size | Max. Speed, rpm | Abrasive Material | Abrasive Bond Material | Type | Shape | Grit (Surface Texture) | Norton Abrasive Grade | Each | |
5SG Blue—VS Bond | |||||||||||
For Aluminum, Brass, Bronze, Carbides, Ceramics, Composites, Copper, Fiberglass, Glass, Plaster, Plastic, Rubber, Stone, Titanium | |||||||||||
| 4" | 1 1/2" | 1 1/4" | 5,730 | Ceramic Alumina | Vitrified Clay | Type 11 | Flared Cup | 60 (Rough) | L | 00000000 | 000000 |
| 4" | 1 1/2" | 1 1/4" | 5,730 | Ceramic Alumina | Vitrified Clay | Type 11 | Flared Cup | 80 (Smooth) | J | 000000000 | 00000 |
Grinding Bits for Nonmetals
Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.
Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape | Abrasive Material | Shank Lg. | Grit (Surface Texture) | Each | ||
For Composites, Fiberglass, Plaster, Plastic, Rubber, Wood | |||||||||
1/8"Shank Dia. | |||||||||
| 1 | 7/16" | 21/32" | 20,000 | Cylindrical | Tungsten Carbide | 7/8" | 36 (Rough) Bronze | 0000000 | 000000 |
| 2 | 5/32" | 13/16" | 20,000 | Barrel | Tungsten Carbide | 7/8" | 36 (Rough) Bronze | 0000000 | 00000 |
| 5 | 5/16" | 11/16" | 20,000 | Cone | Tungsten Carbide | 7/8" | 36 (Rough) Bronze | 0000000 | 00000 |
| 5 | 5/8" | 11/16" | 20,000 | Cone | Tungsten Carbide | 7/8" | 36 (Rough) Bronze | 0000000 | 00000 |
| 6 | 13/32" | 13/32" | 20,000 | Ball | Tungsten Carbide | 7/8" | 36 (Rough) Bronze | 0000000 | 00000 |
1/4"Shank Dia. | |||||||||
| 1 | 5/8" | 1" | 23,000 | Cylindrical | Tungsten Carbide | 1" | 36 (Rough) Bronze | 0000000 | 00000 |
| 2 | 1/4" | 1 1/2" | 23,000 | Barrel | Tungsten Carbide | 1" | 36 (Rough) Bronze | 0000000 | 00000 |
| 3 | 1/8" | 1 1/4" | 23,000 | Barrel | Tungsten Carbide | 1" | 36 (Rough) Bronze | 0000000 | 00000 |
| 4 | 1/8" | 1 1/2" | 23,000 | Taper | Tungsten Carbide | 1" | 36 (Rough) Bronze | 0000000 | 00000 |
| 5 | 3/4" | 1" | 23,000 | Cone | Tungsten Carbide | 1" | 36 (Rough) Bronze | 0000000 | 00000 |
| 6 | 3/4" | 3/4" | 23,000 | Ball | Tungsten Carbide | 1" | 36 (Rough) Bronze | 0000000 | 00000 |