A good value for everyday use, these wheels offer an economical balance between heavy material removal and long life. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Wheels are aluminum oxide, which is the most common abrasive used in grinding metal. Use for grinding surfaces and removing weld seams. The _1/8" and _3/16" thick wheels can also be used for notching and cutting.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Grind a variety of materials, such as metal, fiberglass, and ceramics. These grinding wheels work with aluminum when properly lubricated. The diamond abrasive is core bonded to expose more abrasive particles, so they’ll last longer and outperform traditional grinding wheels with fewer sparks and less odor. Also known as (AVOS) Type 29 wheels, they have an upside-down dish shape for a large contact area.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Made with reinforced aluminum oxide, these wheels are designed for light grinding, cutting, and notching in steel pipelines. They’re also ideal for grinding welds. Also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels have a layer of fiberglass mesh reinforcement.

From stone to rubber to metal—slice through a variety of materials with the same cutoff saw wheel. Made of silicon carbide and aluminum oxide abrasives, these wheels won’t clog or burn when cutting through nonmetals. Attach them to your bench-top cutoff saw to make burr-free cuts in pipes, bars, and sheets. You shouldn’t use these wheels with handheld saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. Wheels are made of silicon carbide abrasive that is reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make burr-free cuts in a variety of materials—from rubber to metal to stone. Made from a blend of silicon carbide and aluminum oxide abrasives, these cutoff wheels won’t clog or burn when slicing through nonmetals. They’re often used to cut hard or thick pipe, sheets, and bars to size.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in metal. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Made from bonded silicon carbide abrasives, these wheels slice through titanium, one of the hardest materials to cut. Designed to make smooth, burr-free cuts, they cut faster and stay sharp longer than wheels made with aluminum oxide abrasives. Use them to cut bars, sheets, and tubing into manageable pieces. Not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels are silicon carbide that is reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make burr-free cuts in metal tubing and extrusions, such as strut channels and rails. Designed to slice through hard metals, these wheels are made of bonded abrasives. They’re reinforced with two layers of fiberglass mesh for increased stability and strength compared to other bench-top cutoff wheels. This reinforcement also results in less vibration for a cleaner cut. These cutoff wheels are not for use with hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels. They’re reinforced with a layer of fiberglass mesh. Wheels are not for use on hand-held saws. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make fast, burr-free cuts in stainless steel. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.