Screw-Down Cord Grips for Building Cable
Tighten the screws to secure building cable for dry locations, also known as Romex type NM-B cable, to enclosures and outlet boxes.
For Trade Size | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Max. Hole Dia. | Conduit | Knockout | Material | Features | Specifications Met | 1-19 | 20-Up | |
| 0.66" | 3/8 | 1/2 | Zinc | Zinc Locknut | UL Listed | 0000000 | 00000 | 00000 |
| 0.86" | 3/4 | 3/4 | Zinc | Zinc Locknut | UL Listed | 0000000 | 0000 | 0000 |
| 1.08" | 1 | 1 | Zinc | Zinc Locknut | UL Listed | 0000000 | 0000 | 0000 |
| 1.41" | 1 1/4 | 1 1/4 | Zinc | Zinc Locknut | UL Listed | 0000000 | 0000 | 0000 |
| 1.65" | 1 1/2 | 1 1/2 | Zinc | Zinc Locknut | UL Listed | 0000000 | 0000 | 0000 |
| 2.09" | 2 | 2 | Zinc | Zinc Locknut | UL Listed | 0000000 | 0000 | 0000 |
Unthreaded-Hole Pull Handles
Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.
Round grips allow your hand to pivot in any direction.
Rectangular grips have a flat surface that keeps your hand from slipping, but may be less comfortable than round and oval grips.
Style 1-20 handles have an unthreaded through hole. Mount them from the front of your surface.
Zinc handles have good corrosion resistance.
Mount. Hole Ctr.-to-Ctr. | Grip | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Mount. Holes | Wd. | Ht. | Dia. | Ht. | Thick. | Projection | Pull Cap., lbs. | Mount. Screw Size | Mount. Fasteners Included | Each | |
Style 2 (Unthreaded Through Hole)—Round Grip | |||||||||||
Zinc—Polished | |||||||||||
| 4 | 4 1/2" | 13/16" | 7/16" | __ | __ | 1 1/4" | Not Rated | No. 8 | No | 00000000 | 000000 |
Style 6 (Unthreaded Through Hole)—Rectangular Grip | |||||||||||
Chrome-Plated Zinc—Polished | |||||||||||
| 4 | 7" | 1" | __ | 1" | 5/8" | 1 3/4" | Not Rated | 1/4" | No | 00000000 | 00000 |
Threaded-Hole Pull Handles
Oval grips conform to your hand and offer more control than round grips.
Rectangular grips have a flat surface that keeps your hand from slipping, but may be less comfortable than round and oval grips.
Zinc handles have good corrosion resistance.
Grip | Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Mount. Hole Ctr.-to-Ctr. Wd. | Ht. | Thick. | Projection | Pull Cap., lbs. | Size | Dp. | No. of Mount. Holes | Mount. Fasteners Included | Each | |
Style 15—Rectangular Grip | ||||||||||
Chrome-Plated Zinc—Dull | ||||||||||
| 4" | 3/8" | 3/16" | 7/8" | Not Rated | 10-24 | 1/2" | 2 | Yes | 0000000 | 00000 |
Threaded-Hole Offset Pull Handles
Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. The grip is offset from the mounting surface so there's room to fully grasp the handle.
Oval grips conform to your hand and offer more control than round grips.
Zinc handles have good corrosion resistance.
Grip | Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Mount. Hole Ctr.-to-Ctr. Wd. | Ht. | Thick. | Projection | Pull Cap., lbs. | Size | Dp. | No. of Mount. Holes | Mount. Fasteners Included | Each | |
45° Offset Angle—Oval Grip | ||||||||||
Chrome-Plated Zinc—Polished | ||||||||||
| 5" | 5/8" | 1/4" | 1 5/8" | Not Rated | 1/4"-20 | 7/8" | 2 | No | 000000 | 000000 |
Recessed Pull Knobs
Mount these knobs in a cutout to keep them out of the way when not in use. Push the grip to extend, and push it again to recess. Use these knobs to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. Made of zinc, they have good corrosion resistance.
Threaded-Hole Recessed Folding Pull Handles with Mounting Plate
Thread screws through holes from the back of your surface into the handle to install. This handle fits into a cutout, so it's flush with the mounting surface. Its grip drops out of the way when you let go. When not in use, the spring-loaded hinge keeps the grip flush with the mounting plate and prevents rattling. Use this handle to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Its rectangular grip has a flat surface that keeps your hand from slipping.
Chrome-plated zinc handles have good corrosion resistance.
Grip | For Panel Cutout | Mounting Plate | Each | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Folding Angle | Ht. | Thick. | Material | Handle Wd. | Projection | Back Projection | Ht. | Wd. | Ht. | Wd. | Thick. | No. of Mount. Holes | Mount. Fasteners Included | Temp. Range, °F | Features | 1-19 | 20-Up | |
Rectangular Grip | ||||||||||||||||||
Chrome-Plated Zinc—Polished | ||||||||||||||||||
| 90° | 11/16" | 9/16" | Rubber | 3 3/4" | 1 13/16" | 11/16" | 3" | 5 5/16" | 3 3/16" | 5 9/16" | 5/32" | 4 | Yes | -10° to 200° | Spring-Loaded Hinge | 00000000 | 0000000 | 000000 |