McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    21 Products

    Grommet Assortments

    Image of Product. Front orientation. Grommets. Grommet Assortments.
    Keep a variety of grommets on hand for holes of different diameters.
    Multipurpose SBR Rubber—These durable grommets resist cracking and other signs of wear over long periods. However, they're not for use outdoors or with oil and harsh chemicals.
    Weather-Resistant EPDM—The best option for outdoor use, these grommets withstand long-term exposure to sunlight, rain, and ozone.
    No. of
    Pieces
    Includes
    Temp.,
    ° F
    For Use
    Outdoors
    Container
    Type
    Color
    Each
    Multipurpose SBR Rubber
    99Grommets for 1/2" Hole Diameter with 3/8" ID (12 ea.), Grommets for 1/4" Hole Diameter with 1/8" ID (25 ea.), Grommets for 3/16" Hole Diameter with 1/8" ID (25 ea.), Grommets for 3/8" Hole Diameter with 1/4" ID (25 ea.), Grommets for 5/8" Hole Diameter with 3/8" ID (6 ea.), Grommets for 7/8" Hole Diameter with 5/8" ID (6 ea.)-30 to 170NoPlastic CaseBlack2725N11000000
    172Grommets for 1 1/8" Hole Diameter with 3/4" ID (24 ea.), Grommets for 1" Hole Diameter with 11/16" ID (24 ea.), Grommets for 1/2" Hole Diameter with 3/8" ID (15 ea.), Grommets for 1/4" Hole Diameter with 1/8" ID (25 ea.), Grommets for 3/16" Hole Diameter with 1/8" ID (25 ea.), Grommets for 3/4" Hole Diameter with 1/2" ID (15 ea.), Grommets for 3/8" Hole Diameter with 1/4" ID (25 ea.), Grommets for 5/8" Hole Diameter with 3/8" ID (9 ea.), Grommets for 7/8" Hole Diameter with 5/8" ID (10 ea.)-30 to 170NoPlastic CaseBlack2725N1200000
     
    Weather-Resistant EPDM
    99Grommets for 1/2" Hole Diameter with 3/8" ID (12 ea.), Grommets for 1/4" Hole Diameter with 1/8" ID (25 ea.), Grommets for 3/16" Hole Diameter with 1/8" ID (25 ea.), Grommets for 3/8" Hole Diameter with 1/4" ID (25 ea.), Grommets for 5/8" Hole Diameter with 3/8" ID (6 ea.), Grommets for 7/8" Hole Diameter with 5/8" ID (6 ea.)-60 to 300YesPlastic CaseBlack3547N1100000
     

    Fabric Grommet Kits

    Kits include grommets of a single size and all the tools you need to install them. The grommets add a protective metal ring to a hole so rope and cable don’t tear your tarp, cover, or curtain. Strike the cutting punch with a mallet to create a hole, then set the grommet using the installation punch and die set.
    Standard Washer
    Image of Product. Front orientation. Contains Annotated. Grommets. Fabric Grommet Kits, Standard Washer.
    Image of Product. Front orientation. Grommets. Fabric Grommet Kits.
    Brass—Add a bright finish to your fabric.
    Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
    Grommet
    Trade Size
    For Max.
    Material Thk.
    ID
    Flange
    Dia.
    Dp. Under
    Flange
    For Use
    Outdoors
    Mil. Spec.
    Includes
    No. of
    Grommets
    Each
    Brass
    00.1"1/4"0.545"0.175"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K31000000
    10.1"9/32"0.687"0.185"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K3200000
    20.14"3/8"0.815"0.215"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K1300000
    30.21"7/16"0.97"0.295"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch129610K3400000
    40.29"1/2"1.05"0.374"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch129610K3500000
     
    Tooth-Lock Washer
    Image of Product. Front orientation. Contains Annotated. Grommets. Fabric Grommet Kits, Tooth-Lock Washer.
    Image of Product. Front orientation. Grommets. Fabric Grommet Kits.
    Teeth grip the fabric for a stronger hold than standard washers.
    Brass—Add a bright finish to your fabric.
    Grommet Trade Size—Make sure your grommet, hole, and installation tools have the same trade size.
    Grommet
    Trade Size
    For Max.
    Material Thk.
    ID
    Flange
    Dia.
    Dp. Under
    Flange
    For Use
    Outdoors
    Mil. Spec.
    Includes
    No. of
    Grommets
    Each
    Brass
    00.11"1/4"0.545"0.175"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch489610K16000000
    10.12"9/32"0.687"0.185"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch489610K1700000
    20.15"3/8"0.815"0.215"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K1800000
    30.23"7/16"0.97"0.295"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K1900000
    40.3"1/2"1.05"0.374"YesMIL-G-16491Cutting Block, Cutting Punch, Die Set, Installation Punch249610K2100000
     

    Reinforced Plastic Edge Trim Selector Packs

    Image of Product. Front orientation. Contains Annotated, MultipleImages. Edge Trim. Reinforced Plastic Edge Trim Selector Packs.
    Try out several sizes and styles before committing to one. This edge trim is reinforced with metal to last longer and grip firmer than our other plastic trim.
    Chemical-Resistant Vinyl Plastic—This trim resists coolant, grease, fuel oils, and a range of strong acids and bases.
    Hardness Rating—The harder the edge trim, the better it withstands impact and abrasion over time. The softer the edge trim, the more cushioning it provides for fragile materials such as glass and thin metal.
    No. of
    Pieces
    Flexibility
    Temp. Range,
    ° F
    For Use
    Outdoors
    Flammability
    Rating
    Includes
    Hardness
    Hardness
    Rating
    Each
    Chemical-Resistant Vinyl Plastic
    6Flexible-20 to 150YesFMVSS No. 302
    		Style 3 (Pebbled) Trim: 1/16"-11/64" Inside Wd. (A), 7/16" Inside Ht. (B), 25/64" Outside Wd. (C), 33/64" Outside Ht. (D)
    Style 3 (Pebbled) Trim: 1/64"-1/32" Inside Wd. (A), 9/32" Inside Ht. (B), 15/64" Outside Wd. (C), 23/64" Outside Ht. (D)
    Style 3 (Pebbled) Trim: 5/64"-13/64" Inside Wd. (A), 37/64" Inside Ht. (B), 3/8" Outside Wd. (C), 21/32" Outside Ht. (D)
    Style 4 (Weave) Trim: 1/32"-1/8" Inside Wd. (A), 7/16" Inside Ht. (B), 25/64" Outside Wd. (C), 33/64" Outside Ht. (D)
    Style 6 Trim: 1/64"-3/64" Inside Wd. (A), 3/8" Inside Ht. (B), 9/32" Outside Wd. (C), 29/64" Outside Ht. (D)
    Style 7 Trim: 9/64"-1/4" Inside Wd. (A), 37/64" Inside Ht. (B), 1/2" Outside Wd. (C), 21/32" Outside Ht. (D)    		Durometer 75AHard8451A500000
     

    Rubber Edge Trim Selector Packs

    Image of Product. Front orientation. Edge Trim. Rubber Edge Trim Selector Packs.
    Image of Specification. Style 1. Front orientation. Contains Annotated, MultipleImages. Style 1. Rubber Edge Trim Selector Packs.
    Image of Specification. Style 2. Front orientation. Contains Annotated, MultipleImages. Style 2. Rubber Edge Trim Selector Packs.

    Style 1

    Style 2

    Image of Specification. Style 5. Front orientation. Contains Annotated, MultipleImages. Style 5. Rubber Edge Trim Selector Packs.

    Style 5

    Try out several sizes and styles of edge trim before committing to one. This rubber trim protects sheet metal, signs, and machinery from denting and wear while adding a finished look.
    Multipurpose Neoprene—Durable enough for most applications, this trim absorbs occasional knocks and scrapes without losing its shape and elasticity.
    Abrasion-Resistant SBR Rubber—Resists cracking and other signs of wear over long periods. However, it’s not for use outdoors or with oil and harsh chemicals.
    Hardness Rating—The harder the edge trim, the better it withstands impact and abrasion over time. The softer the edge trim, the more cushioning it provides for fragile materials such as glass and thin metal.
    No. of
    Pieces
    Flexibility
    Temp. Range,
    ° F
    For Use
    Outdoors
    Style
    Includes
    Hardness
    Hardness
    Rating
    Each
    Multipurpose Neoprene
    6Extra Flexible-40 to 150Yes1
    2
    5    		Style 1 Trim: 1/16" Inside Wd. (A), 1/8" Inside Ht. (B), 3/16" Outside Wd. (C), 1/4" Outside Ht. (D)
    Style 1 Trim: 1/32" Inside Wd. (A), 7/16" Inside Ht. (B), 3/16" Outside Wd. (C), 1/2" Outside Ht. (D)
    Style 1 Trim: 1/8" Inside Wd. (A), 1/4" Inside Ht. (B), 1/4" Outside Wd. (C), 5/16" Outside Ht. (D)
    Style 1 Trim: 3/16" Inside Wd. (A), 5/16" Inside Ht. (B), 5/16" Outside Wd. (C), 3/8" Outside Ht. (D)
    Style 2 Trim: 1/4" Inside Wd. (A), 1/2" Inside Ht. (B), 1/2" Outside Wd. (C), 5/8" Outside Ht. (D)
    Style 5 Trim: 3/8" Inside Wd. (A), 25/32" Inside Ht. (B), 43/64" Outside Wd. (C), 1" Outside Ht. (D)    		Durometer 55AMedium8507K400000
     
    Abrasion-Resistant SBR Rubber
    8Extra Flexible0 to 220No1
    2    		Style 1 Trim: 1/16" Inside Wd. (A), 11/32" Inside Ht. (B), 7/32" Outside Wd. (C), 7/16" Outside Ht. (D)
    Style 1 Trim: 1/2" Inside Wd. (A), 1/2" Inside Ht. (B), 5/8" Outside Wd. (C), 5/8" Outside Ht. (D)
    Style 1 Trim: 1/32" Inside Wd. (A), 5/32" Inside Ht. (B), 7/64" Outside Wd. (C), 7/32" Outside Ht. (D)
    Style 1 Trim: 1/4" Inside Wd. (A), 5/16" Inside Ht. (B), 3/8" Outside Wd. (C), 3/8" Outside Ht. (D)
    Style 1 Trim: 3/16" Inside Wd. (A), 7/16" Inside Ht. (B), 5/16" Outside Wd. (C), 1/2" Outside Ht. (D)
    Style 1 Trim: 3/32" Inside Wd. (A), 21/64" Inside Ht. (B), 3/16" Outside Wd. (C), 3/8" Outside Ht. (D)
    Style 1 Trim: 3/8" Inside Wd. (A), 13/32" Inside Ht. (B), 1/2" Outside Wd. (C), 1/2" Outside Ht. (D)
    Style 2 Trim: 1/8" Inside Wd. (A), 1/4" Inside Ht. (B), 1/4" Outside Wd. (C), 5/16" Outside Ht. (D)    		Durometer 55AMedium8510K950000
     

    Fabric Snap Kits

    Image of Product. Front orientation. Fabric Snaps. Fabric Snap Kits.
    Kits include a hand punch tool with die and six snaps.
    Snaps
    Replacement Snaps
    Snap
    Dia.
    Includes
    Each
    Pkg.
    Qty.
    Pkg.
    Nickel-Plated Brass
    9/16"Die
    Hand Punch Tool
    Six Female Fabric Snap Halves
    Six Male Fabric Snap Halves    		95730A21000000695730A32000000
     

    Fabric Snaps with Tapping Screw Stud Kits

    Image of Product. Front orientation. Fabric Snaps. Fabric Snaps with Tapping Screw Stud Kits.
    Use these snaps when you need a fabric snap fastened to a solid surface. The tapping screw stud cuts its own threads in a pilot hole.
    Snaps
    Replacement Snaps
    Screw
    Size
    Thread
    Lg.
    Snap
    Dia.
    Screw Material
    For Use In
    Includes
    Each
    Pkg.
    Qty.
    Pkg.
    Nickel-Plated Brass
    No. 7
    		3/8"9/16"18-8 Stainless Steel
    		Composite, Particleboard, Plywood, WoodDie
    Hand Punch Tool
    Six Female Fabric Snap Halves
    Six Male Fabric Snap Halves with Tapping Screw Studs    		95730A230000000695730A44000000
     

    Bumper Assortments

    Image of Product. Front orientation. Bumpers. Bumper Assortments, Style 2.

    Style 2

    Keep a range of bumper shapes and sizes on hand for quick fixes and prototyping.
    Style 2—The push-and-stay bumpers in these assortments work well as feet for small electronics, spacers between components, stops for access panels, and more.
    Includes
    No. of
    Pieces
    Color
    Container
    Type
    Each
    Style 2
    5/16" OD × 1/16" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 1/8" ID (12 ea.)
    7/16" OD × 3/32" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 1/4" ID (12 ea.)
    7/16" OD × 3/16" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 1/4" ID (12 ea.)
    1/2" OD × 3/32" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 3/16" ID (12 ea.)
    1/2" OD × 1/8" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 1/4" ID (12 ea.)
    1/2" OD × 5/32" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 1/4" ID (12 ea.)
    1/2" OD × 1/4" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 1/4" ID (12 ea.)
    9/16" OD × 1/8" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 1/4" ID (12 ea.)
    9/16" OD × 1/8" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 9/32" ID (12 ea.)
    3/4" OD × 3/16" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 11/32" ID (12 ea.)
    1" OD × 5/16" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 1/2" ID (12 ea.)
    1" OD × 1/2" Ht. Black SBR Rubber Bumpers with Push-In Stem—For 3/8" ID (12 ea.)    		144BlackPlastic Case3338T24000000
     
    back to top