440 Stainless Steel-Carriage Guide Rail Carriages

Filter by

Rail Width

Carriage Width

Carriage Length

Overall Height

Carriage Profile

Carriage Material

Mounting Hole Thread Size

Load Fastening

Number of Mounting Holes

Bearing Material

440 Stainless Steel

Steel

Dynamic Load Capacity

Less than 1,000 lb.

1,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

Static Pitch Moment Load Capacity

Less than 250 ft·lbf

250 ft·lbf to 499 ft·lbf

500 ft·lbf to 999 ft·lbf

Static Load Capacity

Less than 10,000 lb.

10,000 lb. to 19,999 lb.

Static Roll Moment Load Capacity

Less than 500 ft·lbf

500 ft·lbf to 999 ft·lbf

End Seal Material

304 Stainless Steel

Plastic

Rubber

Mounting Fastener Thread Size

Lubrication

Bearing Type

Static Yaw Moment Load Capacity

Maximum Temperature

Carriage and Guide Rail Type

Mounting Hole Depth

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Forward

How can we improve?

152 Products

About Moment Loads

Standard Carriage

Flanged Carriage

Load Fastening from Top

Load Fastening from Bottom

Guide Rail

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out. Add guide rail bellows to protect rails from contaminants as carriages move across them.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments).

Mounting hole plugs protect mounting fasteners from corrosion.

Note: Each carriage can only be used with its corresponding guide rail.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

440 Stainless Steel Carriages							440 Stainless Steel Guide Rails			Made-to-Order 440 Stainless Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each
Load Fastening From Top
7	290	8	17	23.5	000000	000000	60; 90; 120; 180	0000000	00000	30-285	0000000	00000	000000	00
8	260	11	16	24	00000000	00000	35; 55; 75; 95; 115; 135; 155; 175; 195; 215; 235; 255; 275	00000000	000	35-275	00000000	000	000000	00
9	400	10	20	30	000000	00000	80; 160; 220; 280	0000000	000	40-840	0000000	000	000000	00
10	190	6.5	17	24.5	000000	000000	60; 120; 160; 280	0000000	000	40-280	0000000	000	000000	00
10	480	13	20	31	00000000	00000	45; 70; 95; 120; 145; 170; 195; 220; 245; 270; 295; 320; 345; 370; 395; 420; 445; 470	00000000	000	45-470	00000000	000	000000	00
12	740	13	27	34	000000	000000	150; 200; 350; 475	0000000	000	50-975	0000000	000	000000	00
12	1,200	20	27	45	00000000	000000	70; 110; 150; 190; 230; 270; 310; 350; 390; 430; 470; 510; 550; 590; 630; 670	00000000	000	70-670	00000000	000	000000	00000
14	390	9	25	31.5	000000	000000	90; 150; 240; 300	0000000	000	60-270	0000000	000	000000	00
15	1,650	24	34	66	0000000	000000	100; 220; 340; 400	0000000	000	100-1,800	00000000	000	000000	00
18	510	12	30	39	000000	000000	120; 180; 240; 300	0000000	000	60-660	0000000	0000	000000	00
20	2,300	28	42	76	0000000	000000	280; 500; 1,000; 1,480	0000000	000	140-3,600	00000000	000	00000000	000
23	3,900	33	48	92	0000000	000000	280; 500; 1,000; 1,480	0000000	000	142-3,600	00000000	000	00000000	000
24	960	14	40	44	000000	000000	120; 160; 320; 400	0000000	0000	80-640	0000000	000	000000	00
28	5,650	42	60	108	0000000	000000	500; 760; 1,000; 2,000	0000000	000	184-3,600	00000000	000	00000000	000
34	8,450	48	70	121	0000000	000000	500; 760; 1,000; 2,000	0000000	000	184-3,600	00000000	0000	00000000	000

Flanged Carriages and Guide Rails

440 Stainless Steel Carriages							440 Stainless Steel Guide Rails			Made-to-Order 440 Stainless Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each
Load Fastening From Top and From Bottom
8	260	10	24	24	00000000	000000	35; 55; 75; 95; 115; 135; 155; 175; 195; 215; 235; 255; 275	00000000	00000	35-275	00000000	00000	000000	00
10	480	12	30	31	00000000	00000	45; 70; 95; 120; 145; 170; 195; 220; 245; 270; 295; 320; 345; 370; 395; 420; 445; 470	00000000	000	45-470	00000000	000	000000	00
12	1,200	19	40	45	00000000	000000	70; 110; 150; 190; 230; 270; 310; 350; 390; 430; 470; 510; 550; 590; 630; 670	00000000	000	70-670	00000000	000	000000	00000
15	2,400	24	47	57	0000000	000000	160; 280; 460; 640	0000000	000	__	000000	00	000000	000
20	4,400	30	63	74	0000000	000000	280; 460; 640; 820	0000000	000	__	000000	00	000000	000
23	6,150	36	70	83	0000000	000000	280; 460; 640; 1,000	0000000	0000	__	000000	00	000000	000
28	9,050	42	90	98	0000000	000000	280; 440; 760; 1,240	0000000	0000	__	000000	00	000000	0000
34	12,050	48	100	109	0000000	000000	280; 440; 760; 1,240	0000000	0000	__	000000	00	000000	0000

Anti-Reflective Ultra-Corrosion-Resistant Ball Bearing Carriages and Guide Rails

Carriage

Load Fastening from Top

Guide Rail

A black chrome plating diffuses light, preventing reflecting light from causing equipment to malfunction. They're great for precision positioning systems that use photosensors or cameras, which are sensitive to light. The finish also resists rust two times better than 440 stainless steel alone. They have ball bearings, so they operate with less friction than sleeve and roller bearing carriages for accurate movement in high-speed, high-load applications. However, they don’t hold up to dusty and wet environments as well as sleeve bearings. These carriages have a standard profile that’s narrower than flanged carriages, making them better for confined spaces.

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

Black Chrome-Plated 440 Stainless Steel Carriages and 440 Stainless Steel Bearings							Black Chrome-Plated 440 Stainless Steel Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm
Standard Carriages—Load Fastening From Top
7	290	8	17	23.5	0000000	000000	60; 90; 120; 180	0000000	00000
9	400	10	20	30	0000000	000000	80; 160; 220; 280	0000000	000
10	190	6.5	17	24.5	0000000	000000	60; 120; 160; 280	0000000	000
12	740	13	27	34	0000000	000000	150; 200; 350; 475	0000000	000
14	390	9	25	31.5	0000000	000000	90; 150; 240; 300	0000000	000
15	1,100	16	32	42	0000000	000000	90; 150; 240; 300	0000000	000
18	510	12	30	39	0000000	000000	120; 180; 240; 300	0000000	0000
20	1,450	20	40	50	0000000	000000	120; 180; 240; 300	0000000	000
24	960	14	40	44	0000000	000000	120; 160; 320; 400	0000000	0000

Corrosion-Resistant Maintenance-Free Ball Bearing Carriages and Guide Rails

Carriage

Load Fastening from Top

Guide Rail

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails. An internal reservoir continuously supplies grease for maintenance-free operation, making them great for hard-to-reach places. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

440 Stainless Steel Carriages and Guide Rails

Carriages							Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm		Each
Load Fastening From Top
5	150	6	12	19	000000	000000	60; 90; 120; 150	0000000	00000	000000	00
7	290	8	17	23.5	00000000	00000	60; 90; 120; 180	0000000	000	000000	00
9	400	10	20	30	00000000	000000	80; 160; 220; 280	0000000	000	000000	00
10	190	6.5	17	24.5	00000000	000000	60; 120; 160; 280	0000000	000	000000	00
12	740	13	27	34	00000000	000000	150; 200; 350; 475	0000000	000	00000000	00000
14	390	9	25	31.5	00000000	000000	90; 150; 240; 300	0000000	000	000000	00
18	510	12	30	39	00000000	000000	120; 180; 240; 300	0000000	000	000000	00
24	960	14	40	44	00000000	000000	120; 160; 320; 400	0000000	0000	000000	00
30	1,300	15	50	49.5	000000	000000	160; 240; 320; 560	0000000	0000	000000	00
42	1,550	16	60	55	000000	000000	160; 240; 320; 560	0000000	0000	000000	00

Clean Room Ball Bearing Carriages and Guide Rails

Standard Carriage

Flanged Carriage

Load Fastening from Top

Load Fastening from Bottom

Guide Rail

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Add mounting hole plugs to protect mounting fasteners from corrosion.

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

440 Stainless Steel Carriages								440 Stainless Steel Guide Rails			Made-to-Order 440 Stainless Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Environmental Rating		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each
Load Fastening From Top
5	120	6	12	16	Fed. Std. Class 1,000; ISO Class 6	00000000	0000000	60; 90; 120; 150	0000000	00000	30-195	0000000	00000	000000	00
5	150	6	12	19	Fed. Std. Class 1,000; ISO Class 6	000000	000000	60; 90; 120; 150	0000000	000	30-195	0000000	000	000000	00
7	210	8	17	19	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	60; 90; 120; 180	0000000	000	30-285	0000000	000	000000	00
7	290	8	17	23.5	Fed. Std. Class 1,000; ISO Class 6	000000	000000	60; 90; 120; 180	0000000	000	30-285	0000000	000	000000	00
7	380	8	17	31	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	60; 90; 120; 180	0000000	000	30-285	0000000	000	000000	00
9	260	10	20	21.5	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	80; 160; 220; 280	0000000	000	40-840	0000000	000	00000000	00000
9	400	10	20	30	Fed. Std. Class 1,000; ISO Class 6	000000	000000	80; 160; 220; 280	0000000	000	40-840	0000000	000	00000000	0000
9	530	10	20	40.5	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	80; 160; 220; 280	0000000	000	40-840	0000000	000	00000000	0000
12	490	13	27	25	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	150; 200; 350; 475	0000000	000	50-975	0000000	000	00000000	0000
12	740	13	27	34	Fed. Std. Class 1,000; ISO Class 6	000000	000000	150; 200; 350; 475	0000000	000	50-975	0000000	000	00000000	0000
12	960	13	27	44	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	150; 200; 350; 475	0000000	000	50-975	0000000	000	00000000	0000
15	780	16	32	32	Fed. Std. Class 1,000; ISO Class 6	0000000	000000	160; 240; 560; 680	0000000	000	80-960	0000000	000	00000000	0000
15	1,100	16	32	42	Fed. Std. Class 1,000; ISO Class 6	000000	000000	160; 240; 560; 680	0000000	000	80-960	0000000	000	00000000	0000
15	1,450	16	32	57	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	160; 240; 560; 680	0000000	000	80-960	0000000	000	00000000	0000
20	1,000	20	40	38	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	240; 480; 660; 840	0000000	000	120-900	0000000	000	00000000	0000
20	1,450	20	40	50	Fed. Std. Class 1,000; ISO Class 6	000000	000000	240; 480; 660; 840	0000000	000	120-900	0000000	000	00000000	0000
20	1,900	20	40	68	Fed. Std. Class 1,000; ISO Class 6	00000000	000000	240; 480; 660; 840	0000000	000	120-900	0000000	000	00000000	0000

Flanged Carriages and Guide Rails

440 Stainless Steel Carriages								440 Stainless Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Environmental Rating		Each	Rail Lengths, mm		Per mm		Each
Load Fastening From Top and From Bottom
15	3,150	24	47	64	Fed. Std. Class 10,000; ISO Class 7	00000000	0000000	160; 280; 460; 640	0000000	00000	000000	00000
20	5,000	30	63	79	Fed. Std. Class 10,000; ISO Class 7	00000000	000000	220; 460; 640; 820	0000000	000	000000	000
23	7,100	36	70	92	Fed. Std. Class 10,000; ISO Class 7	00000000	000000	220; 460; 820; 1,240	0000000	000	000000	000

High-Cycle Low-Profile Ball Bearing Carriages and Guide Rails

Carriage

Load Fastening from Top

Guide Rail

Run many cycles in tight spaces before replacing or re-greasing carriages. These low-profile carriages have a plastic cage surrounding the ball bearings to keep them from colliding with each other. This reduces the noise, heat, friction, and dust they produce, so carriages can travel back and forth along the rail many times. The cage also traps grease around the balls and makes sure they roll in the same direction. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Made of stainless steel, all of these carriages and guide rails are corrosion resistant. Each carriage has end seals to keep lubricant in and dirt out.

Mounting hole plugs protect mounting fasteners from corrosion.

10 mm carriages and guide rails include mounting hole plugs.

For technical drawings and 3-D models, click on a part number.

440 Stainless Steel Carriages							440 Stainless Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm		Each
Load Fastening From Top
7	330	8	17	23.4	0000000	000000	40; 55; 70; 85; 100; 115; 130	000000	00000	000000	00
9	600	10	20	30.8	0000000	00000	55; 75; 95; 115; 135; 155; 195; 275; 375	000000	000	000000	00
9	780	10	20	40.8	0000000	000000	55; 75; 95; 115; 135; 155; 195; 275; 375	000000	000	000000	00
10	150	6.5	17	20.5	00000000	00000	40; 55; 70; 100; 130; 160	00000000	0000	000000	00
12	890	13	27	34.4	0000000	00000	120; 145; 170; 195; 220; 270; 320; 370; 470	000000	000	000000	00000
12	1,300	13	27	47.1	0000000	000000	120; 145; 170; 195; 220; 270; 320; 370; 470	000000	000	000000	000
14	450	9	25	31	0000000	00000	50; 80; 110; 140; 170; 200; 260; 290	000000	000	000000	00
15	1,450	16	32	43	0000000	00000	150; 230; 310; 430; 550; 670	000000	000	000000	000
15	2,150	16	32	60.8	0000000	000000	150; 230; 310; 430; 550; 670	000000	000	000000	000
18	730	12	30	39	0000000	00000	80; 110; 140; 170; 200; 260; 290	000000	000	000000	000
18	940	12	30	50.7	0000000	000000	80; 110; 140; 170; 200; 260; 290	000000	000	000000	000
24	1,200	14	40	44.5	0000000	00000	70; 110; 150; 190; 230; 310; 390; 470	000000	000	000000	00
24	1,600	14	40	59.5	0000000	000000	70; 110; 150; 190; 230; 310; 390; 470	000000	000	000000	00
42	2,050	16	60	55.5	0000000	000000	150; 230; 310; 430; 550; 670	000000	000	000000	00
42	2,750	16	60	74.5	0000000	000000	150; 230; 310; 430; 550; 670	000000	000	000000	00