24 mm Carriage Width Guide Rail Carriages

Filter by

Material

Lubrication

System of Measurement

Rail Width

Overall Height

Load Fastening

Carriage Length

Carriage Profile

Static Pitch Moment Load Capacity

Less than 250 ft·lbf

Carriage Material

440 Stainless Steel

Zinc Alloy

Dynamic Load Capacity

Less than 1,000 lb.

Bearing Type

Ball

Plain

Number of Mounting Holes

Rail Alignment Style

Fixed

Self-Aligning

Carriage and Guide Rail Type

Bearing Material

Static Load Capacity

Mounting Fastener Thread Size

M2.3

Static Yaw Moment Load Capacity

1.8 ft·lbf

3.3 ft·lbf

REACH

Compliant

Mounting Hole Thread Size

RoHS

Mounting Hole Depth

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Forward

How can we improve?

8 Products

About Moment Loads

Flanged Carriage

Load Fastening from Top

Load Fastening from Bottom

Guide Rail

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out. Add guide rail bellows to protect rails from contaminants as carriages move across them.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments).

Note: Each carriage can only be used with its corresponding guide rail.

Flanged Carriages and Guide Rails

440 Stainless Steel Carriages							440 Stainless Steel Guide Rails			Made-to-Order 440 Stainless Steel Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm
Load Fastening From Top and From Bottom
8	260	10	24	24	00000000	000000	35; 55; 75; 95; 115; 135; 155; 175; 195; 215; 235; 255; 275	00000000	00000	35-275	00000000	00000

Low-Profile Sleeve Bearing Carriages and Guide Rails

Style B Carriage

Guide Rail for Style B Carriage

For applications with low clearance, these carriages protrude less than 5 mm above their rails. Use them for light to moderate loads, as well as frequent starting and stopping applications where tight tolerances are not required. Sleeve bearings allow them to outperform ball bearings in wet, dirty, and high-vibration environments. Mount in any orientation without affecting load capacity.

Zinc Carriages and PTFE Plastic Bearings
							Mounting						Anodized Aluminum Guide Rails
	For Rail Wd., mm	Static Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Dia., mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
B	27	110	9.5	24	40	190°	2	4.5	5	No	0000000	00000	100; 250; 500; 1,000; 1,500; 2,000	000000	00000

Self-Aligning Low-Profile Sleeve Bearing Carriages and Guide Rails

Style B Carriage

Guide Rail for Style B Carriage

Compensate for rail misalignment in low-clearance applications with these carriages and guide rails. These carriages stick out less than 5 mm above their rails, giving them a low profile. They have a floating bearing that adjusts to correct misalignment between rails, so your carriages still move in tandem. Use them for light to moderate loads and applications with frequent starting and stopping where tight tolerances aren’t needed.

For a complete system, you’ll need a self-aligning carriage and rail on one side and a fixed-alignment carriage and rail on the other (all sold separately).

Carriages for axial rail misalignment compensate when the rails aren’t installed at the same exact height.

Carriages for parallel rail misalignment compensate when one rail is straight and the other is installed at a slight angle.

Carriages for axial/parallel rail misalignment compensate when the rails aren’t installed at the same exact height and also when one rail is straight while the other is installed at a slight angle.

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

Self-Aligning Carriages and Guide Rails for Axial Rail Misalignment

Zinc Carriages and PTFE Plastic Bearings
								Mounting						Anodized Aluminum Guide Rails
	For Rail Wd., mm	Static Load Cap., lbs.	Axial Misalignment Capability, mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Dia, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
B	27	110	0.5	9.5	24	40	120°	2	4.5	3.8	No	0000000	000000	100; 250; 500; 1,000; 1,500; 2,000	000000	00000

Self-Aligning Carriages and Guide Rails for Parallel Rail Misalignment

Zinc Carriages and PTFE Plastic Bearings
								Mounting						Anodized Aluminum Guide Rails
	For Rail Wd., mm	Static Load Cap., lbs.	Parallel Misalignment Capability, mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Dia, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
B	27	110	0.8	9.5	24	40	120°	2	4.5	3.8	No	0000000	000000	100; 250; 500; 1,000; 1,500; 2,000	000000	00000

Self-Aligning Carriages and Guide Rails for Axial/Parallel Rail Misalignment

Zinc Carriages and PTFE Plastic Bearings
			Misalignment Capability, mm						Mounting						Anodized Aluminum Guide Rails
	For Rail Wd., mm	Static Load Cap., lbs.	Axial	Parallel	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Dia, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
B	27	110	0.3	0.4	9.5	24	40	120°	2	4.5	3.8	No	0000000	000000	100; 250; 500; 1,000; 1,500; 2,000	000000	00000

Fixed-Alignment Carriages and Guide Rails

Style B Carriage

Guide Rail for Style B Carriage

Carriages and PTFE Plastic Bearings
							Mounting						Anodized Aluminum Guide Rails
	For Rail Wd., mm	Static Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Dia., mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
Zinc Carriages
B	27	110	10	24	40	190°	2	4.5	5	No	0000000	00000	100; 250; 500; 1,000; 1,500; 2,000	000000	00000

About Moment Loads

Corrosion-Resistant Ball Bearing Carriages and Guide Rails

Low-Profile Sleeve Bearing Carriages and Guide Rails

Self-Aligning Low-Profile Sleeve Bearing Carriages and Guide Rails