48 mm Carriage Width Guide Rail Carriages

Filter by

Rail Width

23 mm

Carriage Profile

Standard

Mounting Hole Thread Size

Overall Height

Carriage Length

Static Load Capacity

10,000 lb. to 19,999 lb.

Load Fastening

From Top

Static Roll Moment Load Capacity

Less than 500 ft·lbf

500 ft·lbf to 999 ft·lbf

Static Pitch Moment Load Capacity

Less than 250 ft·lbf

250 ft·lbf to 499 ft·lbf

500 ft·lbf to 999 ft·lbf

Dynamic Load Capacity

1,000 lb. to 9,999 lb.

Carriage Material

Stainless Steel

Steel

Static Yaw Moment Load Capacity

Number of Mounting Holes

Bearing Type

Bearing Material

Mounting Hole Thread Pitch

1 mm

Carriage and Guide Rail Type

Lubrication

Lubrication Inlet

Maximum Temperature

End Seal Material

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Compliant with Exemptions

Forward

How can we improve?

32 Products

About Moment Loads

Hand Brake Shown Installed

Standard Carriage

Load Fastening from Top

Guide Rail

Hand Brake

Operating with less friction than sleeve and roller bearing carriages, ball bearing carriages provide accurate movement and positioning in high-speed, high-load applications. However, they don’t hold up to dusty and wet environments as well as sleeve bearing carriages. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out. Add optional guide rail bellows to protect the rails from contaminants as carriages move across them.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion. Carriage and guide rail systems for 5 mm-12 mm wide rails include mounting hole plugs with the guide rails.

Note: Each carriage can only be used with its corresponding guide rail.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Carriages								Guide Rails			Made-to-Order Guide Rails			Hand Brakes		Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Carriage Material		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each		Each
Load Fastening From Top
23	6,200	40	48	83	Steel	0000000	0000000	220; 280; 340; 460; 640; 820; 1,000; 1,240; 1,600; 2,500	0000000	00000	220-2,500	0000000	00000	0000000	0000000	000000	00000

Corrosion-Resistant Ball Bearing Carriages and Guide Rails

Standard Carriage

Load Fastening from Top

Guide Rail

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out. Add guide rail bellows to protect rails from contaminants as carriages move across them.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments).

Mounting hole plugs protect mounting fasteners from corrosion.

Note: Each carriage can only be used with its corresponding guide rail.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

440 Stainless Steel Carriages							440 Stainless Steel Guide Rails			Made-to-Order 440 Stainless Steel Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each
Load Fastening From Top
23	3,900	33	48	92	0000000	0000000	280; 500; 1,000; 1,480	0000000	00000	142-3,600	00000000	00000	00000000	00000

Horizontal-Mount Ball Bearing Carriages and Guide Rails

Standard Carriage

Hand Brake Shown Installed

Guide Rail

Hand Brake

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages. The ball bearings provide accurate movement and positioning at high speeds under heavy loads. End seals keep lubricant in and dirt out. Add guide rail bellows to protect rails from contaminants as carriages move across them.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

Load Fastening from Top

For made-to-order guide rails, please specify the length (in 1 mm increments). The mounting holes will be centered along the rail.

Steel Carriages							Steel Guide Rails			Made-to-Order Steel Guide Rails			Hand Brakes		Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each		Each
Load Fastening From Top
23	6,900	33	48	83	0000000	0000000	280; 460; 820; 1,600	000000	00000	220-2,500	0000000	00000	0000000	0000000	000000	00000

Maintenance-Free Ball Bearing Carriages and Guide Rails

Standard Carriage

Load Fastening from Top

Hand Brake Shown Installed

Guide Rail

Hand Brake

With an internal reservoir that continuously supplies grease, these carriages and guide rails are good for use in hard-to-reach places. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Steel Carriages							Steel Guide Rails			Made-to-Order Steel Guide Rails			Hand Brakes		Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each		Each
Load Fastening From Top
23	4,450	36	48	67	00000000	0000000	220; 280; 340; 460; 640; 820; 1,000	0000000	00000	230-2,500	0000000	00000	0000000	0000000	0000000	00000
23	5,100	36	48	86	0000000	000000	220; 280; 340; 460; 640; 820; 1,000	0000000	000	230-2,500	0000000	000	0000000	000000	0000000	000
23	8,350	36	48	108	00000000	000000	220; 280; 340; 460; 640; 820; 1,000	0000000	000	230-2,500	0000000	000	0000000	000000	0000000	000

Corrosion-Resistant Maintenance-Free Ball Bearing Carriages and Guide Rails

Carriage

Load Fastening from Top

Guide Rail

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails. An internal reservoir continuously supplies grease for maintenance-free operation, making them great for hard-to-reach places. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

410 Stainless Steel Carriages and Guide Rails

Carriages							Guide Rails			Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm		Each
Load Fastening From Top
23	5,100	36	48	86	0000000	0000000	280; 500; 1,000; 1,480	0000000	00000	0000000	00000

High-Cycle Ball Bearing Carriages and Guide Rails

Standard Carriage

Load Fastening from Top

Hand Brake Shown Installed

Guide Rail

Hand Brake

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance. They also run quietly, since the bearings aren’t colliding. End seals keep dust from entering, and the cage traps lubricant around the bearings, reducing friction and heat buildup. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Carriages							Steel Guide Rails			Made-to-Order Steel Guide Rails			Hand Brakes		Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each		Each
Load Fastening From Top
23	7,100	36	48	92	00000000	0000000	220; 280; 340; 460; 640; 820; 1,240; 1,600	0000000	00000	220-2,500	0000000	00000	0000000	0000000	000000	00000
23	7,100	40	48	92	0000000	000000	220; 280; 340; 460; 640; 820; 1,240; 1,600	0000000	000	220-2,500	0000000	000	0000000	000000	000000	00
23	8,250	36	48	109	00000000	000000	220; 280; 340; 460; 640; 820; 1,240; 1,600	0000000	000	220-2,500	0000000	000	0000000	000000	000000	000

Horizontal-Mount Quiet-Ride Ball Bearing Carriages and Guide Rails

Standard Carriage

Load Fastening from Top

Hand Brake Shown Installed

Guide Rail

Hand Brake

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages. The ball bearings operate with less friction than sleeve and roller bearing carriages to provide accurate movement and positioning at high speeds under heavy loads. However, they’re worse than sleeve bearings in dusty and wet environments. A plastic cage separates the ball bearings to minimize noise, reduce heat buildup, and eliminate ball collisions. End seals keep lubricant in and dirt out.

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

Steel Carriages							Steel Guide Rails			Made-to-Order Steel Guide Rails			Hand Brakes
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each
Load Fastening From Top
23	7,050	33	48	83	0000000	0000000	280; 460; 820; 1,600	000000	00000	220-2,500	0000000	00000	0000000	0000000

Roller Bearing Carriages and Guide Rails

Standard Carriage

Load Fastening from Top

Guide Rail

With a larger contact area than ball bearing carriages, roller bearing carriages provide better positioning accuracy and support heavier loads. Mount in any orientation without affecting load capacity.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Steel Carriages							Steel Guide Rails			Made-to-Order Steel Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm
Load Fastening From Top
23	7,200	36	48	98	000000	0000000	240; 480; 840; 1,200	0000000	00000	120-2,940	0000000	00000