About Moment Loads
More
Horizontal-Mount Ball Bearing Carriages and Guide Rails
Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages. The ball bearings provide accurate movement and positioning at high speeds under heavy loads. End seals keep lubricant in and dirt out. Add guide rail bellows to protect rails from contaminants as carriages move across them.
Flanged carriages have through-holes for access when fastening loads.
Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.
Mounting hole plugs protect mounting fasteners from corrosion.
For made-to-order guide rails, please specify the length (in 1 mm increments). The mounting holes will be centered along the rail.
Steel Carriages | Steel Guide Rails | Made-to-Order Steel Guide Rails | Hand Brakes | Mounting Hole Plugs | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd., mm | Dynamic Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Each | Rail Lengths, mm | Per mm | Rail Lengths, mm | Per mm | Each | Each | |||||
Load Fastening From Bottom | ||||||||||||||||
| 15 | 3,100 | 24 | 52 | 57 | 6250K19 | 0000000 | 6250K1 | 00000 | 160-1,600 | 6250K33 | 00000 | 1685N1 | 0000000 | 6709K1 | 00000 | |
Horizontal-Mount Quiet-Ride Ball Bearing Carriages and Guide Rails
Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages. The ball bearings operate with less friction than sleeve and roller bearing carriages to provide accurate movement and positioning at high speeds under heavy loads. However, they’re worse than sleeve bearings in dusty and wet environments. A plastic cage separates the ball bearings to minimize noise, reduce heat buildup, and eliminate ball collisions. End seals keep lubricant in and dirt out.
Flanged carriages have mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom.
For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.
Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.
Mounting hole plugs protect mounting fasteners from corrosion.
Steel Carriages | Steel Guide Rails | Made-to-Order Steel Guide Rails | Hand Brakes | Mounting Hole Plugs | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd., mm | Dynamic Load Cap., lbs. | O'all Ht., mm | Carriage Wd., mm | Carriage Lg., mm | Each | Rail Lengths, mm | Per mm | Rail Lengths, mm | Per mm | Each | Each | |||||
Load Fastening From Top and From Bottom | ||||||||||||||||
| 15 | 3,300 | 24 | 52 | 57 | 6713K101 | 0000000 | 6250K1 | 00000 | 160-1,600 | 6250K33 | 00000 | 1685N1 | 0000000 | 6709K1 | 00000 | |