Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages. The ball bearings provide accurate movement and positioning at high speeds under heavy loads. End seals keep lubricant in and dirt out. Add guide rail bellows to protect rails from contaminants as carriages move across them.

Flanged carriages have through-holes for access when fastening loads.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

With an internal reservoir that continuously supplies grease, these carriages and guide rails are good for use in hard-to-reach places. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance. They also run quietly, since the bearings aren’t colliding. End seals keep dust from entering, and the cage traps lubricant around the bearings, reducing friction and heat buildup. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

Carriages with PTFE bearing operate with less friction than carriages with a polyethylene bearing.

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

A floating bearing in these self-aligning carriages adjusts to compensate for misalignment between rails, so your carriages still move in tandem. For a complete system, you’ll need a self-aligning carriage and rail on one side and a fixed-alignment carriage and rail on the other (all sold separately).

Carriages for axial rail misalignment compensate when the rails aren’t installed at the same exact height.

Carriages for parallel rail misalignment compensate when one rail is straight and the other is installed at a slight angle.

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

A handle on the side of the carriage locks the carriage in place. With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

Note: Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

Create a self-aligning system that can be locked in place with these carriages and guide rails. The floating bearing in these self-aligning carriages compensates for misalignment, so carriages will still move in tandem even if the rails aren’t installed at the same exact height. A complete system includes a self-aligning carriage and rail on one side and a fixed-alignment carriage and rail on the other (all sold separately).

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.