About Moment Loads
More
Sleeve Bearing Carriages and Guide Rails
With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.
Carriages with polyethylene bearing have high impact strength and are more abrasion resistant than carriages with a PTFE bearing.
Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.
Polyethylene Plastic Carriages and Bearings | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | Ceramic-Coated Aluminum Guide Rails | ||||||||||||||
| For Rail Wd. | Static Load Cap., lbs. | O'all Ht. | Carriage Wd. | Carriage Lg. | Max. Temp., °F | No. of Holes | Hole Thread Size  | Hole Thread Pitch, mm | Hole Dp. | Fasteners Included | Each | Rail Lengths | Per Inch | ||
| 1" | 300 | 7/8" | 1 3/4" | 2" | 180° | 4 | M4 | 0.7 | 3/8" | No | 0000000 | 000000 | 000000 | 00000 | |
Sleeve Bearing Carriages for T-Slotted Framing
Mate with a T-slotted rail to add linear motion to your assembly. Carriages are suitable for washdown environments. Note: Carriages cannot be used upside down, vertically, or on their side.
T-slotted rails can be easily cut to length and drilled for mounting.
View additional T-slot hardware and accessories.
Hand brakes mount on the carriages to hold them in place on the rail. Carriages have mounting holes for the brakes.
End caps mount on the rails to prevent overtravel.
T-slot fasteners (sold separately) let you mount components to the carriages.
Carriages | Hand Brakes | T-Slot Fasteners | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Linear Load Capacity @ Speed | Static Load Cap., lbs. | Carriage Wd. | Carriage Lg. | Carriage Ht. | Carriage Color | Bearing Material | Max. Temp., °F | Each | Each | Pkg. Qty. | Pkg. | |||
For Single Rail | |||||||||||||||
| 1" | 110 lbs. @ 100 fpm | 500 | 2 15/16" | 4" | 1 1/4" | Silver | UHMW Plastic | 180° | 00000000 | 000000 | 00000000 | 000000 | 4 | 000000000 | 00000 |
| 1" | 30 lbs. @ 100 fpm | 200 | 2 15/16" | 1 7/8" | 1 1/4" | Silver | UHMW Plastic | 180° | 00000000 | 00000 | 00000000 | 00000 | 4 | 000000000 | 0000 |
Side-Mount Sleeve Bearing Carriages for T-Slotted Framing
Fasten loads on the side of these carriages and add linear motion to a T-slot assembly. Carriages are suitable for washdown environments.
T-slotted rails can be easily cut to length and drilled for mounting.
View additional T-slot hardware and accessories.
Hand brakes mount on the carriages to hold them in place on the rail. Carriages have mounting holes for the brakes.
End caps mount on the rails to prevent overtravel.
T-slot fasteners (sold separately) let you mount components to the carriages.
| For Rail Wd. | Dynamic Linear Load Capacity @ Speed | Static Load Cap., lbs. | Carriage Wd. | Carriage Lg. | Carriage Ht. | Ht. | Bearing Material | Max. Temp., °F | Each | |
Carriage for Single Rail | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1" | 23 lbs. @ 100 fpm | 150 | 1 5/8" | 1 7/8" | 2" | 1 5/16" | UHMW Plastic | 180° | 00000000 | 000000 |
| 1" | 41 lbs. @ 100 fpm | 350 | 1 5/8" | 4" | 2" | 1 5/16" | UHMW Plastic | 180° | 00000000 | 00000 |
Square Sleeve Bearing Carriages and Guide Rails
The square profile prevents loads from twisting and rotating. Mount in any orientation without affecting load capacity. Carriages have strong, chemical- and abrasion-resistant Frelon bearings on all four sides. Adjust the bearing plugs to maintain precise alignment.
Aluminum Carriages and Frelon Plastic Bearings | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting | 304 Stainless Steel Guide Rails | |||||||||||||||
| For Rail Wd. | Static Load Cap., lbs. | Carriage Wd. | Carriage Lg. | Carriage Ht. | Max. Temp., °F | No. of Holes | No. of Holes per Side | Hole Thread Size | Hole Dp. | Fasteners Included | Lubrication | Each | Rail Lengths, ft. | Per Ft. | ||
| 1" | 920 | 1 23/32" | 2 1/4" | 1 23/32" | 400° | 16 | 4 | 8-32 | 21/64" | No | Not Required | 00000000 | 0000000 | 00000000 | 000000 | |
| 1" | 920 | 1 23/32" | 4" | 1 23/32" | 400° | 32 | 8 | 8-32 | 21/64" | No | Not Required | 00000000 | 000000 | 00000000 | 00000 | |
| Replacement 316 Stainless Steel Plug with Frelon Plastic Bearing | 00000000 | Each | 000000 |
Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Wd. | Lg. | Ht. | Flange Thick. | Material | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Fasteners Included | Each | |
| 1" | 3" | 2 3/16" | 3" | 3/8" | Aluminum | 4 | 1/4" | 2 1/4" | No | 00000000 | 0000000 |
Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Wd. | Lg. | Ht. | Material | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Fasteners Included | Each | |
| 1" | 2 3/8" | 5/8" | 1 15/16" | Aluminum | 4 | 13/64" | 13/16" | No | 00000000 | 0000000 |
Side-Mount Track Roller Carriages for T-Slotted Framing
Combine with a T-slotted rail to add linear motion to your assembly.
T-slotted rails can be easily cut to length and drilled for mounting.
View additional T-slot hardware and accessories.
End caps mount on the rails to prevent rollers from overtravel.
Aluminum Carriages with Nylon Plastic Rollers | T-Slotted Framing Fasteners | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rail Wd. | Dynamic Load Cap., lbs. | O'all Ht. | Carriage Wd. | Carriage Lg. | Roller Dia. | Bearing Material | Max. Temp., °F | Includes | Each | Pkg. | ||
For Single Rail | ||||||||||||
| 1" | 25 | 1 5/16" | 3 1/8" | 1" | 1 1/2" | Bronze | 150° | Two Socket Head Screws, Two T-Slot Fasteners | 000000 | 000000 | 000000000 | 00000 |