30 mm Rail Width Guide Rail Carriages

Filter by

Carriage Width

Carriage Length

Overall Height

Bearing Type

Track Roller Type

Carriage Material

Bearing Material

Load Fastening

Carriage Profile

Static Roll Moment Load Capacity

Less than 500 ft·lbf

Number of Mounting Holes

Number of Track Rollers

Dynamic Load Capacity

Less than 1,000 lb.

1,000 lb. to 9,999 lb.

Lubrication

Static Load Capacity

Mounting Hole Thread Size

M10

Carriage and Guide Rail Type

Ball Bearing

Sleeve Bearing

Track Roller

Static Yaw Moment Load Capacity

Maximum Temperature

Static Pitch Moment Load Capacity

Less than 250 ft·lbf

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Maximum Clamping Force

Not Rated

Forward

How can we improve?

12 Products

About Moment Loads

Load Fastening from Top

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

440 Stainless Steel Carriages and Guide Rails

Carriages							Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm
Load Fastening From Top
30	1,300	15	50	49.5	000000	0000000	160; 240; 320; 560	0000000	00000

Self-Aligning Sleeve Bearing Carriages and Guide Rails

Carriage

Guide Rail for Carriage with PTFE Bearing

A floating bearing in these self-aligning carriages adjusts to compensate for misalignment between rails, so your carriages still move in tandem. For a complete system, you’ll need a self-aligning carriage and rail on one side and a fixed-alignment carriage and rail on the other (all sold separately).

Carriages for axial rail misalignment compensate when the rails aren’t installed at the same exact height.

Carriages for parallel rail misalignment compensate when one rail is straight and the other is installed at a slight angle.

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

Self-Aligning Carriages and Guide Rails for Axial Rail Misalignment

Aluminum Carriages and PTFE Plastic Bearings
							Mounting							Anodized Aluminum Guide Rails
For Rail Wd., mm	Static Load Cap., lbs.	Axial Misalignment Capability, mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
30	3,100	0.5	42	90	103	190°	4	M10	1.5	27	No	0000000	0000000	250; 500; 1,000; 1,500; 2,000	0000000	00000

Self-Aligning Carriages and Guide Rails for Parallel Rail Misalignment

Aluminum Carriages and PTFE Plastic Bearings
							Mounting							Anodized Aluminum Guide Rails
For Rail Wd., mm	Static Load Cap., lbs.	Parallel Misalignment Capability, mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
30	3,100	0.5	42	90	103	190°	4	M10	1.5	27	No	0000000	0000000	250; 500; 1,000; 1,500; 2,000	0000000	00000

Fixed-Alignment Carriages and Guide Rails

Carriage

Guide Rail for Carriage with PTFE Bearing

Aluminum Carriages and PTFE Plastic Bearings
						Mounting							Anodized Aluminum Guide Rails
For Rail Wd., mm	Static Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
30	3,100	42	90	103	190°	4	M10	1.5	27	No	000000	0000000	250; 500; 1,000; 1,500; 2,000	0000000	00000

Locking Sleeve Bearing Carriages and Guide Rails

Carriage

Guide Rail

A handle on the side of the carriage locks the carriage in place. With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

Note: Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

Aluminum Carriages and PTFE Plastic Bearings
								Mounting							Anodized Aluminum Guide Rails
For Rail Wd., mm	Static Load Cap., lbs.	O'all Wd., mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Handle Dia., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
30	3,100	110	42	90	103	28	190°	4	M10	1.5	27	No	000000	0000000	250; 500; 1,000; 1,500; 2,000	0000000	00000

Self-Aligning Locking Sleeve Bearing Carriages and Guide Rails

Create a self-aligning system that can be locked in place with these carriages and guide rails. The floating bearing in these self-aligning carriages compensates for misalignment, so carriages will still move in tandem even if the rails aren’t installed at the same exact height. A complete system includes a self-aligning carriage and rail on one side and a fixed-alignment carriage and rail on the other (all sold separately).

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

Self-Aligning Carriages and Guide Rails

Carriage

Guide Rail

Aluminum Carriages and PTFE Plastic Bearings
								Mounting							Anodized Aluminum Guide Rails
For Rail Wd., mm	Static Load Cap., lbs.	Axial Misalignment Capability, mm	O'all Wd., mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
30	3,100	1	110	42	90	103	190°	4	M10	1.5	27	No	0000000	0000000	250; 500; 1,000; 1,500; 2,000	0000000	00000

Fixed-Alignment Carriages and Guide Rails

Carriage

Guide Rail

Aluminum Carriages and PTFE Plastic Bearings
							Mounting							Anodized Aluminum Guide Rails
For Rail Wd., mm	Static Load Cap., lbs.	O'all Wd., mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
30	3,100	110	42	90	103	190°	4	M10	1.5	27	No	000000	0000000	250; 500; 1,000; 1,500; 2,000	0000000	00000

Side-Mount Track Roller Carriages and Guide Rails

Carriage with Wipers

Guide Rail

Mount along a wall or other vertical surface.

Carriages with adjustable rollers can be adjusted for a snug or loose fit on the rail (also known as preload).

Carriages with wipers sweep away dust and other contaminants.

For technical drawings and 3-D models, click on a part number.

Carriages with Adjustable Rollers									Guide Rails
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Roller Dia., mm	Max. Temp., °F		Each	Rail Lengths, mm		Per mm
Aluminum Carriages with Plastic Wipers and Steel Rollers
30	220	28	25	87	16	175°	00000000	0000000	480; 720; 960; 1,440	0000000	00000
30	220	28	25	112	16	175°	00000000	000000	480; 720; 960; 1,440	0000000	000
30	330	28	25	137	16	175°	00000000	000000	480; 720; 960; 1,440	0000000	000

Email Us

About Moment Loads

Corrosion-Resistant Maintenance-Free Ball Bearing Carriages and Guide Rails

Self-Aligning Sleeve Bearing Carriages and Guide Rails

Locking Sleeve Bearing Carriages and Guide Rails

Self-Aligning Locking Sleeve Bearing Carriages and Guide Rails

Side-Mount Track Roller Carriages and Guide Rails