53 mm Rail Width Guide Rail Carriages

Filter by

Static Roll Moment Load Capacity

1,000 ft·lbf to 1,999 ft·lbf

2,000 ft·lbf to 2,999 ft·lbf

3,000 ft·lbf or greater

Static Pitch Moment Load Capacity

1,000 ft·lbf to 1,999 ft·lbf

2,000 ft·lbf or greater

Static Load Capacity

30,000 lb. to 39,999 lb.

40,000 lb. or greater

Carriage Profile

Flanged

Standard

Dynamic Load Capacity

20,000 lb. to 29,999 lb.

Static Yaw Moment Load Capacity

Carriage Width

Load Fastening

Mounting Fastener Thread Size

M12

M14

Mounting Hole Thread Size

Carriage Length

Overall Height

Bearing Type

Maximum Temperature

Carriage Material

End Seal Material

Grease Fitting Thread Type

BSPT

Lubricant

Grease with Lithium Thickener

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

RoHS

Compliant with Exemptions

Bearing Material

Lubrication Inlet

Mounting Hole Depth

13 Products

About Moment Loads

Hand Brake Shown Installed

Standard Carriage

Flanged Carriage

Load Fastening from Top

Load Fastening from Bottom

Guide Rail

Hand Brake

Operating with less friction than sleeve and roller bearing carriages, ball bearing carriages provide accurate movement and positioning in high-speed, high-load applications. However, they don’t hold up to dusty and wet environments as well as sleeve bearing carriages. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out. Add optional guide rail bellows to protect the rails from contaminants as carriages move across them.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion. Carriage and guide rail systems for 5 mm-12 mm wide rails include mounting hole plugs with the guide rails.

Note: Each carriage can only be used with its corresponding guide rail.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Carriages								Guide Rails			Made-to-Order Guide Rails			Hand Brakes		Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Carriage Material		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each		Each
Load Fastening From Top
53	27,200	80	100	163	Steel	0000000	0000000	780; 1,020; 1,260; 1,500; 1,980; 2,580; 2,940	0000000	00000	780-2,500	0000000	00000	0000000	0000000	000000	00000

Flanged Carriages and Guide Rails

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Carriages								Guide Rails			Made-to-Order Guide Rails			Hand Brakes		Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Carriage Material		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each		Each
Load Fastening From Top and From Bottom
53	27,150	70	140	163	Steel	0000000	0000000	780; 1,020; 1,260; 1,500; 1,980; 2,580; 2,940	0000000	00000	780-2,500	0000000	00000	0000000	0000000	000000	00000

High-Cycle Ball Bearing Carriages and Guide Rails

Standard Carriage

Flanged Carriage

Load Fastening from Top

Load Fastening from Bottom

Hand Brake Shown Installed

Guide Rail

Hand Brake

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance. They also run quietly, since the bearings aren’t colliding. End seals keep dust from entering, and the cage traps lubricant around the bearings, reducing friction and heat buildup. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Standard Carriages and Guide Rails

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Carriages							Steel Guide Rails			Made-to-Order Steel Guide Rails			Hand Brakes		Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each		Each
Load Fastening From Top
53	28,750	80	100	171	0000000	0000000	780; 1,260	0000000	00000	780-2,500	0000000	00000	0000000	0000000	000000	00000

Flanged Carriages and Guide Rails

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Carriages							Steel Guide Rails			Made-to-Order Steel Guide Rails			Hand Brakes		Mounting Hole Plugs
For Rail Wd., mm	Dynamic Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm		Each	Rail Lengths, mm		Per mm	Rail Lengths, mm		Per mm		Each		Each
Load Fastening From Top and From Bottom
53	28,750	70	140	171	0000000	0000000	780; 1,260	0000000	00000	780-2,500	0000000	00000	0000000	0000000	000000	00000