80 mm Rail Width Guide Rail Carriages

Filter by

Lubrication

Not Required

Static Load Capacity

Less than 10,000 lb.

Carriage Width

72 mm

Static Yaw Moment Load Capacity

11 ft·lbf

Overall Height

12 mm

Number of Mounting Holes

Carriage Length

80 mm

Bearing Material

PTFE

Bearing Type

Plain

Static Pitch Moment Load Capacity

Less than 250 ft·lbf

Mounting Hole Thread Size

Static Roll Moment Load Capacity

Less than 500 ft·lbf

Carriage Material

Zinc

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Mounting Hole Thread Pitch

REACH

RoHS

Mounting Hole Depth

Rail Alignment Style

Carriage and Guide Rail Type

Sleeve Bearing

Maximum Temperature

Less than 175° F

175° F to 199° F

For Rail Misalignment Type

Axial

Parallel

Axial Misalignment Capability

0.6 mm

Parallel Misalignment Capability

0.8 mm

Forward

How can we improve?

5 Products

About Moment Loads

Style C Carriage

Guide Rail for Style C Carriage

For applications with low clearance, these carriages protrude less than 5 mm above their rails. Use them for light to moderate loads, as well as frequent starting and stopping applications where tight tolerances are not required. Sleeve bearings allow them to outperform ball bearings in wet, dirty, and high-vibration environments. Mount in any orientation without affecting load capacity.

For technical drawings and 3-D models, click on a part number.

Zinc Carriages and PTFE Plastic Bearings
							Mounting							Anodized Aluminum Guide Rails
	For Rail Wd., mm	Static Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
C	80	220	12	72	80	190°	4	M4	0.7	7	No	0000000	000000	100; 250; 500; 1,000; 1,500; 2,000	000000	00000

Self-Aligning Low-Profile Sleeve Bearing Carriages and Guide Rails

Style C Carriage

Guide Rail for Style C Carriage

Compensate for rail misalignment in low-clearance applications with these carriages and guide rails. These carriages stick out less than 5 mm above their rails, giving them a low profile. They have a floating bearing that adjusts to correct misalignment between rails, so your carriages still move in tandem. Use them for light to moderate loads and applications with frequent starting and stopping where tight tolerances aren’t needed.

For a complete system, you’ll need a self-aligning carriage and rail on one side and a fixed-alignment carriage and rail on the other (all sold separately).

Carriages for axial rail misalignment compensate when the rails aren’t installed at the same exact height.

Carriages for parallel rail misalignment compensate when one rail is straight and the other is installed at a slight angle.

Carriages for axial/parallel rail misalignment compensate when the rails aren’t installed at the same exact height and also when one rail is straight while the other is installed at a slight angle.

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

Self-Aligning Carriages and Guide Rails for Axial Rail Misalignment

Assembly for Axial Rail Misalignment

Zinc Carriages and PTFE Plastic Bearings
								Mounting							Anodized Aluminum Guide Rails
	For Rail Wd., mm	Static Load Cap., lbs.	Axial Misalignment Capability, mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
C	80	220	0.6	12	72	80	120°	4	M4	0.7	3.6	No	0000000	000000	100; 250; 500; 1,000; 1,500; 2,000	000000	00000

Self-Aligning Carriages and Guide Rails for Parallel Rail Misalignment

Assembly for Parallel Rail Misalignment

Zinc Carriages and PTFE Plastic Bearings
								Mounting							Anodized Aluminum Guide Rails
	For Rail Wd., mm	Static Load Cap., lbs.	Parallel Misalignment Capability, mm	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
C	80	220	0.8	12	72	80	120°	4	M4	0.7	3.6	No	0000000	000000	100; 250; 500; 1,000; 1,500; 2,000	000000	00000

Self-Aligning Carriages and Guide Rails for Axial/Parallel Rail Misalignment

Assembly for Axial/Parallel Rail Misalignment

Zinc Carriages and PTFE Plastic Bearings
			Misalignment Capability, mm						Mounting							Anodized Aluminum Guide Rails
	For Rail Wd., mm	Static Load Cap., lbs.	Axial	Parallel	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
C	80	220	0.6	0.8	12	72	80	120°	4	M4	0.7	3.6	No	0000000	000000	100; 250; 500; 1,000; 1,500; 2,000	000000	00000

Fixed-Alignment Carriages and Guide Rails

Style C Carriage

Guide Rail for Style C Carriage

Carriages and PTFE Plastic Bearings
							Mounting							Anodized Aluminum Guide Rails
	For Rail Wd., mm	Static Load Cap., lbs.	O'all Ht., mm	Carriage Wd., mm	Carriage Lg., mm	Max. Temp., °F	No. of Holes	Hole Thread Size	Hole Thread Pitch, mm	Hole Dp., mm	Fasteners Included		Each	Rail Lengths, mm		Per mm
Zinc Carriages
C	80	220	12	72	80	190°	4	M4	0.7	7	No	0000000	000000	100; 250; 500; 1,000; 1,500; 2,000	000000	00000