Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages. The ball bearings provide accurate movement and positioning at high speeds under heavy loads. End seals keep lubricant in and dirt out. Add guide rail bellows to protect rails from contaminants as carriages move across them.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Flanged carriages have through-holes for access when fastening loads.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

With an internal reservoir that continuously supplies grease, these carriages and guide rails are good for use in hard-to-reach places. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails. An internal reservoir continuously supplies grease for maintenance-free operation, making them great for hard-to-reach places. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

Add mounting hole plugs to protect mounting fasteners from corrosion.

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

For technical drawings and 3-D models, click on a part number.

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance. They also run quietly, since the bearings aren’t colliding. End seals keep dust from entering, and the cage traps lubricant around the bearings, reducing friction and heat buildup. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Mount in any orientation without affecting load capacity.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages. The ball bearings operate with less friction than sleeve and roller bearing carriages to provide accurate movement and positioning at high speeds under heavy loads. However, they’re worse than sleeve bearings in dusty and wet environments. A plastic cage separates the ball bearings to minimize noise, reduce heat buildup, and eliminate ball collisions. End seals keep lubricant in and dirt out.

Flanged carriages have mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom.

For made-to-order guide rails, please specify the length of the rail (in 1 mm increments). The mounting holes will be centered along the rail.

Add a hand brake to lock carriages in position. To install, fasten the brake to the same mounting surface as your carriage.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

Run many cycles in tight spaces before replacing or re-greasing carriages. These low-profile carriages have a plastic cage surrounding the ball bearings to keep them from colliding with each other. This reduces the noise, heat, friction, and dust they produce, so carriages can travel back and forth along the rail many times. The cage also traps grease around the balls and makes sure they roll in the same direction. Ball bearings provide accurate movement and positioning at high speeds under heavy loads. Made of stainless steel, all of these carriages and guide rails are corrosion resistant. Each carriage has end seals to keep lubricant in and dirt out.

Mounting hole plugs protect mounting fasteners from corrosion.

For technical drawings and 3-D models, click on a part number.

For smooth, accurate movement around curves and loops, these carriages have ball bearings that work well in high-speed, high-load applications. You'll often see these carriages and guide rails used to build assembly stations and other repetitive processes. Compared to roller and sleeve bearings, the ball bearings in these carriages operate with less friction, but they don't hold up as well as sleeve bearings in dusty and wet environments. The ball bearings don't have a cage, so they'll fall out if you remove the carriage from the guide rail.

For technical drawings and 3-D models, click on a part number.

With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

Carriages with PTFE bearing operate with less friction than carriages with a polyethylene bearing.

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

A floating bearing in these self-aligning carriages adjusts to compensate for misalignment between rails, so your carriages still move in tandem. For a complete system, you’ll need a self-aligning carriage and rail on one side and a fixed-alignment carriage and rail on the other (all sold separately).

Carriages for axial rail misalignment compensate when the rails aren’t installed at the same exact height.

Carriages for parallel rail misalignment compensate when one rail is straight and the other is installed at a slight angle.

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

A handle on the side of the carriage locks the carriage in place. With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

Note: Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

Create a self-aligning system that can be locked in place with these carriages and guide rails. The floating bearing in these self-aligning carriages compensates for misalignment, so carriages will still move in tandem even if the rails aren’t installed at the same exact height. A complete system includes a self-aligning carriage and rail on one side and a fixed-alignment carriage and rail on the other (all sold separately).

Note: Each carriage can only be used with its corresponding guide rail. Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

Use these carriages and guide rails in temperatures up to 300° F. The sleeve bearings allow them to outperform ball bearings carriages in wet, dirty, and high-vibration environments.

Note: Load capacity is diminished when carriages are mounted upside down or on a vertical surface.

For technical drawings and 3-D models, click on a part number.

With a larger contact area than ball bearing carriages, roller bearing carriages provide better positioning accuracy and support heavier loads. Mount in any orientation without affecting load capacity.

Standard carriages are narrower than flanged carriages, making them better for confined spaces.

Flanged carriages have threaded mounting holes on the flanges rather than the carriage body, so you can fasten loads from both the top and bottom. When fastening from the bottom, use the mounting hole as a through-hole.

For technical drawings and 3-D models, click on a part number.

Compatible with THK guide rails, mount these wipers to carriages to sweep chips and other contaminants out of the way as the carriage moves across the rail.

For technical drawings and 3-D models, click on a part number.