McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    107 Products

    Packing Seal Cutters

    Image of Product. Front orientation. Packing Seal Cutters.
    Cut packing seals to precise angles so they fit end to end without gaps, preventing leaks in pumps and valves. Set your preferred angle, packing size, and shaft diameter right on the cutting surface, which includes measurement tools. Then, like a paper cutter, slice down in one smooth motion for a clean cut with no frayed ends. Always cut 2-3mm long, then trim down if needed.
    Overall
    For Max.
    OD
    Cutting
    Angle
    Wd.
    Lg.
    Blade Material
    Includes
    Each
    1"15°, 45°6"21"Heat-Treated SteelAllen Wrench
    Diameter/Circumference Scale
    Mounting Screws
    Vernier Caliper    		3662A110000000
    Replacement Blades
    Each
    Replacement Blades3662A21000000

    Paper Cutters

    Image of Product. Metal Base. Front orientation. Paper Cutters. Metal Base.
    Image of Product. Front orientation. Paper Cutters. Wood Base.

    Metal Base

    Wood Base

    Cut most paper products. Not for sheet metal, wood, leather, rubber, or roofing materials.
    Note: Sheet capacity is based on standard 20-lb. paper.
    Metal Base—Cutters with a metal base are warp, crack, and peel resistant. Not for mat board.
    Hold-Down Clamps—Cutters with hold-down clamps prevent slipping and improve cutting accuracy.
    Cutters
    Replacement Paper
    Cutter Base Blades
    Replacement Paper
    Cutter Handle Blades
    Base
    Max. Cutting
    Wd.
    For Max. No.
    of Sheets
    For Max.
    Thk.
    Lg.
    Wd.
    Pattern
    Grid
    Size
    Blade
    Material
    Features
    Each
    Each
    Each
    For Paper
     
    Metal Base
    12"151/8"13"10"Grid1/2"SteelHold-Down Clamps, Inch/Metric Rule, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A122000000———0———0
    15"151/8"16"12"Grid1/2"SteelHold-Down Clamps, Inch/Metric Rule, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A17100000———0———0
    18"151/8"19"15 1/2"Grid1/2"SteelHold-Down Clamps, Inch/Metric Rule, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A181000000———0———0
     
    Wood Base
    12"151/16"12"12 1/2"Grid1/2"SteelInch/Metric Rule, Self-Sharpening Blade, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A190000003823A5140000003823A533000000
    15"151/16"15"12 1/2"Grid1/2"SteelInch/Metric Rule, Self-Sharpening Blade, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A230000003823A516000003823A53900000
    15"301/8"15"12 1/2"Grid1/2"SteelHold-Down Clamps, Inch/Metric Rule, Self-Sharpening Blade, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A420000003823A518000003823A52600000
    18"151/16"18"18 1/2"Grid1/2"SteelInch/Metric Rule, Self-Sharpening Blade, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A14000000———03823A51900000
    24"151/16"24"18 1/2"Grid1/2"SteelInch/Metric Rule, Self-Sharpening Blade, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A150000003823A523000003823A52200000
    24"301/8"24"18 1/2"Grid1/2"SteelHold-Down Clamps, Inch/Metric Rule, Self-Sharpening Blade, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A440000003823A523000003823A528000000
    30"151/16"30"23 1/2"Grid1/2"SteelInch/Metric Rule, Self-Sharpening Blade, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A16000000———03823A524000000
    30"151/16"30"30"Grid1/2"SteelInch/Metric Rule, Self-Sharpening Blade, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A240000003823A72000003823A71000000
    36"151/16"36"23 1/2"Grid1/2"SteelHold-Down Clamps, Inch/Metric Rule, Self-Sharpening Blade, Skid-Resistant Feet, Trigger-Locking Safety Latch3823A210000003823A5360000003823A535000000
     

    Bench-Top Hot Knives

    Image of Product. Front orientation. Hot Knives. Bench-Top Hot Knives.
    The blade is corrosion-resistant stainless steel.
    Blade
    Handle
    Electrical
    Overall
    Lg.
    Wd.
    Thk.
    Edge
    Blade
    Replaceable
    Material
    Type
    Voltage,
    V AC
    Wattage,
    W
    Cord Lg.,
    ft.
    Connection
    No. of
    Blades
    Max. Temp.,
    ° F
    Ht.
    Wd.
    Dp.
    Each
    For Cork, Fabric, Plastic, Rubber
     
    Stainless Steel Blade
    5"1"0.75"StraightYesAluminum
    		Straight1201906Straight Blade31,00011 1/2"6"15 1/4"7653A10000000
     

    Nozzle Cutters

    Image of ProductInUse. Squeeze to trim nozzle tip.. Front orientation. Nozzle Cutters.
    Image of ProductInUse. Twist to remove cartridge seal.. Front orientation. Nozzle Cutters.
    Image of Product. Front orientation. Nozzle Cutters.

    Squeeze to trim nozzle tip.

    Twist to remove cartridge

    seal.

    Prepare tubes of caulk, sealant, and adhesive for use with these two-bladed cutters. To open a tube, twist the cutting blade around its threaded tip. To cut an angled opening in the tube’s nozzle, tilt cutters and slice with the trimming blade. Safer than a utility knife, these cutters have openings that serve as safety guards and also keep tube and nozzle tips secure for clean cuts.
    For Max.
    Dia.
    Overall
    Lg.
    No. of Blades
    Included
    Blade
    Material
    Blade
    Replaceable
    Precision Knife
    Blade Type
    Each
    1/2"6"2SteelNoCutting, Trimming3674N11000000

    Manual Rubber Cutters

    Image of Product. Front orientation. Rubber Cutters. Manual Rubber Cutters, 14" Cut Length.

    14" Cut Length

    Slice through rubber belts, mats, and sheets. The cutting surface has a raised edge to keep material aligned for straight cuts.
    Cutters
    Replacement
    Blades
    For Max.
    Thk.
    Cut
    Lg.
    Blade
    Material
    Body
    Material
    Lg.
    Wd.
    Ht.
    Includes
    Each
    Each
    Straight Cutting Pattern
     
    For Rubber
    3/8"14"SteelAluminum
    		20"12 1/2"27 1/2"Built-In Cutting Table6141K110000000006141K90000000
     

    Portable Long-Cut Bench-Top Sheet Metal-Cutting Shears

    Make long, straight cuts around your facility—these cutters have a 12" blade and are light enough to move from bench top to bench top. They cut through thin metal and flexible materials. They’re not for use on phenolic or other rigid materials.
    For Use On Aluminum, Brass, Copper, Plastic, Steel, Tin
    Image of Product. Front orientation. Sheet Metal-Cutting Shears. Portable Long-Cut Bench-Top Sheet Metal-Cutting Shears, For Plastic.
    Shears
    Replacement
    Upper Blades
    Replacement
    Lower Blades
    For Max. Thk.
    Material
    Overall
    Cut
    Lg.
    Steel
    Aluminum
    Tin
    Brass
    Copper
    Plastic
    Blade
    Frame
    Lg.
    Ht.
    Wd.
    Handle
    Lg.
    Wt.,
    lb.
    Sharpenable
    Each
    Each
    Each
    12"0.015"0.03"0.015"0.02"0.015"0.062"SteelAluminum, Steel14 1/2"11"25"17 1/4"40Yes86745T51000000086745T52000000086745T530000000
     
    For Use On Aluminum, Brass, Copper, Steel, Tin
    Image of Product. Front orientation. Sheet Metal-Cutting Shears. Portable Long-Cut Bench-Top Sheet Metal-Cutting Shears, Adjustable Stop.

    Adjustable Stop

    Adjustable Stop—Cutters with an adjustable stop can make repeat cuts up to 6” long.
    Shears
    Replacement
    Upper Blades
    Replacement
    Lower Blades
    For Max. Thk.
    Material
    Overall
    Cut
    Lg.
    Steel
    Aluminum
    Tin
    Brass
    Copper
    Blade
    Frame
    Lg.
    Ht.
    Wd.
    Handle
    Lg.
    Wt.,
    lb.
    Sharpenable
    Each
    Each
    Each
    Adjustable Stop
    12"0.02"0.05"0.025"0.025"0.025"SteelSteel14 3/8"19"15 5/8"15"28Yes86745T101000000086745T105000000086745T1040000000
     

    Precision Paper Cutters

    Image of Product. Front orientation. Paper Cutters. Precision Paper Cutters.
    A hand clamp exerts extra pressure for improved cutting accuracy. These paper cutters have a guard that completely covers the blade to prevent accidents. Not for sheet metal, wood, leather, rubber, or roofing materials.
    Note: Sheet capacity is based on standard 20-lb. paper.
    Metal Base—Cutters with a metal base are warp, crack, and peel resistant. Not for mat board.
    Cutters
    Replacement Paper
    Cutter Blade Sets
    Base
    Max. Cutting
    Wd.
    For Max. No.
    of Sheets
    For Max.
    Thk.
    Lg.
    Wd.
    Pattern
    Blade
    Material
    Features
    Each
    Each
    For Paper, Film, Foil, and Mat Board
     
    Metal Base
    13 3/4"251/8"15 3/16"11 15/16"Standard Paper SizesSteelBack Gauge, Clear Polycarbonate Guard, Hand Clamp, Side Gauge with Inch/Metric Scale3850A1600000003850A460000000
    15"501/4"16"14"Standard Paper SizesSteelBack Gauge, Clear Polycarbonate Guard, Hand Clamp, Side Gauge with Inch/Metric Scale3850A110000003850A41000000
    28"403/16"30"20"Standard Paper SizesSteelBack Gauge, Clear Polycarbonate Guard, Hand Clamp, Side Gauge with Inch/Metric Scale3850A13000000003850A43000000
     

    Floor-Mount Presses/Punches/Shears

    Image of Product. Front orientation. Contains Annotated. Presses/Punches/Shears. Floor-Mount Presses/Punches/Shears.
    Also known as a 40-ton metalworker, these hydraulic machines handle a variety of forming tasks including pressing, punching, notching, and shearing. The safety guard complies with ANSI B11.8 standards. Machines require 1 1/2 gallons of Mobil DTE 24 Ultra or equivalent hydraulic oil (sold separately).
    Overall
    Electrical
    Wt. Cap.,
    lb.
    Throat
    Dp.
    Ht.
    Wd.
    Dp.
    Steel Thk.
    for Pressing
    Steel Rod Dia.
    for Shearing
    Sheet Metal Size for
    Shearing, Thick. × Wd.
    Power,
    hp
    Voltage,
    V AC
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Each
    80,0003 3/4"55 1/4"30"24"3/8"3/4"3/8" × 4", 1/4" × 6"1 1/2120Straight Blade3524695A21000000000
    Accessories for Presses/Punches/Shears
    8" Sheet Benders
    Sheet Metal Thk.
    for Shearing
    Sheet Metal Wd.
    for Shearing
    Each
    1/4"8"24695A12000000000
    Notchers
    For Notch
    Lg.
    For Notch
    Wd.
    For Notch
    Ht.
    Each
    1 3/4"2"1/4"24695A13000000000
    Round Punches
    For Max.
    Steel Thk.
    Includes
    Choose a Hole Diameter
    Each
    3/8"Die, Punch1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"24695A14000000
    Square Punches
    For Max.
    Steel Thk.
    Includes
    Choose Hole Lg./Wd.
    Each
    3/8"Die, Punch1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 124695A160000000
    Hydraulic Oil
    Each
    Package
    Mfr.
    Trade Name
    Container
    Size, gal.
    Each
    Pkg.
    Qty.
    Pkg.
    MobilMobil DTE 24 Ultra12158K39100000042158K3920000000

    Compact Flexible Tube and Hose Cutters

    Fit this compact cutter into your pocket or tool belt. Use it to cut plastic and rubber tubing. It has a spring-loaded frame.
    For Cutting Tubing and Hose
    Image of Product. Front orientation. Pipe, Tube, and Hose Cutters. Compact Flexible Tube and Hose Cutters.
    Image of Product. With Lanyard Shown. Front orientation. Pipe, Tube, and Hose Cutters. Compact Flexible Tube and Hose Cutters, Lanyard.

    With Lanyard Shown

    Stainless Steel Blade—Cutters with a stainless steel blade resist corrosion.
    Bead Chain and Lanyard—Cutters with a bead chain or lanyard can be securely clipped onto a tool belt or other surface. Those with a lanyard do not need to be unclipped before use—the lanyard will stretch so you can make nearby cuts.
    Cutters
    Replacement
    Blades (Small Pack)
    Replacement
    Blades (LargePack)
    For
    OD
    Min.
    Max.
    Lg.
    Closed
    Lg.
    Material
    Includes
    Each
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Qty.
    Pkg.
    For Use On Nylon and Polyethylene
     
    Steel Blade
    1/16"7/16"4"4"PlasticBead Chain8288A1100000————0108288A12000000
     
    For Use On Polyethylene, PVC, and Rubber
     
    Stainless Steel Blade
    1/8"3/4"3"3"Plastic—8288A51000058288A54000000108288A5300000
    1/8"3/4"3"3"PlasticLanyard8288A520000058288A5400000108288A5300000
     

    Bench-Mount Flexible Tube and Hose Cutters

    Use to cut plastic and rubber tubing.
    For Cutting Tubing and Hose
    Image of Product. Front orientation. Pipe, Tube, and Hose Cutters. Bench-Mount Flexible Tube and Hose Cutters.
    Cutters
    Replacement
    Blades
    For
    OD
    Mounting
    Holes
    Min.
    Max.
    Lg.
    Closed
    Lg.
    Material
    Mounting
    Location
    No.
    of
    Dia.
    Fasteners
    Included
    Each
    Each
    For Use On ABS, CPVC, Polyethylene, Polypropylene, PVC, and Rubber
     
    Steel Blade
    1/8"3/4"9 1/2"9 1/2"AluminumBench49/32"No3676A1100000003676A12000000
     

    High-Capacity Paper Cutters

    Image of Product. Front orientation. Paper Cutters. High-Capacity Paper Cutters.
    Cut through hundreds of sheets at a time. Not for sheet metal, wood, leather, rubber, or roofing materials.
    Note: Sheet capacity is based on standard 20-lb. paper.
    Hold-Down Clamp—The hold-down clamp securely holds the paper in place.
    Roller Guides—Roller guides control the blade for easier cutting of large capacities.
    Cutters
    Replacement Paper
    Cutter Blades
    Base
    Max. Cutting
    Wd.
    For Max. No.
    of Sheets
    For Max.
    Thk.
    Lg.
    Wd.
    Pattern
    Blade
    Material
    Features
    Each
    Each
    For Paper
     
    Wood Base
    12"3501 1/2"19"19"BlankSteelHold-Down Clamp, Inch/Metric Backstop, Roller Guides, Safety Latch, Skid-Resistant Feet3561A310000000003561A210000000
     

    Freestanding-Base Paper Cutters

    Image of Product. Front orientation. Paper Cutters. Freestanding-Base Paper Cutters.
    Cut most paper products. Not for sheet metal, wood, leather, rubber, or roofing materials.
    Note: Sheet capacity is based on standard 20-lb. paper.
    Cutters
    Replacement Paper
    Cutter Base Blades
    Replacement Paper
    Cutter Handle Blades
    Base
    Max. Cutting
    Wd.
    For Max. No.
    of Sheets
    For Max.
    Thk.
    Overall
    Ht.
    Lg.
    Wd.
    Pattern
    Grid
    Size
    Blade
    Material
    Features
    Each
    Each
    Each
    For Paper
     
    Wood Base
    30"151/16"30"30"30"Grid1/2"Steel1/16" Increment Precision Rule, Blade Handle Lock, Safety Guard Rail, Self-Sharpening Blade, Storage Shelf3823A2200000003823A720000003823A710000000
     

    Shears/Benders/Curvers

    Image of Product. Front orientation. Shears/Benders/Curvers.
    Save space in your shop by cutting, bending, and curving sheet metal with a single machine. Also known as shear brake rolls. Use the blade on the shear to make clean, straight cuts; it has two cutting edges for twice the life. A press brake makes bends up to 90°. Create curves and circles with the slip roll.
    When using the shear or press brake, set the manual back gauge to precisely position the sheet metal for consistent cuts or bends.
    Max.
    Bending
    For Max. Thk.
    Roller
    Mounting
    Holes
    Wd.
    Angle
    Aluminum
    Brass
    Copper
    Stainless
    Steel
    Steel
    Min. Bending
    Radius
    Cut
    Lg.
    Ht.
    Wd.
    Dp.
    Dia.
    No.
    of
    Blade
    Material
    Mounting Fasteners
    Included
    No.
    of
    Dia.
    Each
    For Aluminum, Brass, Copper, Stainless Steel, Steel
    12"90°1/32"1/32"1/32"1/64"1/32"3/4"12"15"14"11"1 1/2"3SteelNo40.32"3333N110000000
    30"90°3/64"1/32"1/32"1/64"1/32"3/4"30"23"32 1/2"14 1/2"1 1/2"3SteelNo40.32"3333N1200000000
    40"90°3/64"1/32"1/32"1/64"1/32"7/8"40"23"42 1/2"14 1/2"1 5/8"3SteelNo40.32"3333N1300000000
     

    Portable Straight-Cutting Bench-Top Sheet Metal-Cutting Shears

    Image of Product. Front orientation. Sheet Metal-Cutting Shears. Portable Straight-Cutting Bench-Top Sheet Metal-Cutting Shears.
    Move these lightweight cutters wherever you need to make clean, straight cuts through metal. They’re supported by a sturdy front leg and a long back edge for stability on uneven surfaces.
    Shears
    Replacement
    Upper Blades
    Replacement
    Lower Blades
    For Max. Thk.
    Material
    Overall
    Cut
    Lg.
    Steel
    Aluminum
    Tin
    Brass
    Copper
    Blade
    Frame
    Lg.
    Ht.
    Wd.
    Handle
    Lg.
    Wt.,
    lb.
    Sharpenable
    Each
    Each
    Each
    Cutting Pattern—Straight
     
    For Use On Aluminum, Brass, Copper, Steel, Tin
    4"0.025"0.05"0.03"0.025"0.025"SteelAluminum, Steel18"6 1/2"10"14"11Yes7427N1400000007427N1600000007427N150000000
     

    Straight-Cutting Bench-Mount Sheet Metal-Cutting Shears

    Image of Product. Front orientation. Sheet Metal-Cutting Shears. Straight-Cutting Bench-Mount Sheet Metal-Cutting Shears.
    Make straight, clean cuts in thick sheet metal.
    Shears
    Replacement
    Blades
    For
    Max. Thk.
    Material
    Overall
    Mounting
    Holes
    Steel
    Stainless
    Steel
    Cut
    Lg.
    Blade
    Frame
    Lg.
    Ht.
    Wd.
    Handle
    Lg.
    Wt.,
    lb.
    Sharpenable
    No.
    of
    Dia.
    Fasteners
    Included
    Each
    Pair
    Cutting Pattern—Straight
     
    For Use On Stainless Steel, Steel, Rubber, Leather
    1/8"1/16"2 1/2"SteelSteel8"8"3 1/4"20"11Yes21/2"No3788A200000003788A150000000
    3/16"1/8"2 1/2"SteelSteel11"13"3 3/4"30"25Yes21/2"No3788A30000003788A16000000
     

    Curve-Cutting Bench-Mount Sheet Metal-Cutting Shears

    Image of Product. Front orientation. Sheet Metal-Cutting Shears. Curve-Cutting Bench-Mount Sheet Metal-Cutting Shears, Fixed Blade.
    Image of Product. Front orientation. Sheet Metal-Cutting Shears. Curve-Cutting Bench-Mount Sheet Metal-Cutting Shears, Rotating Blade.
    Image of Specification. Cutting Pattern - Straight, Right Curves, Left Curves. Front orientation. Curve-Cutting Bench-Mount Sheet Metal-Cutting Shears.

    Fixed

    Blade

    Rotating Blade

    Cutting

    Pattern -

    Straight,

    Right

    Curves,

    Left

    Curves

    Turn your workpiece while cutting to create curves and complex shapes.
    Rotating Blade—Cutters with rotating blades have two blades that turn to cut your material where they meet. When cutting curves, they make cleaner and smoother cuts than cutters with fixed blades.
    Shears
    Replacement Blades
    For Max. Thk.
    Material
    Overall
    Mounting
    Holes
    Cut
    Lg.
    Steel
    Stainless
    Steel
    Aluminum
    Blade
    Diameter
    Blade
    Frame
    Lg.
    Ht.
    Wd.
    Handle
    Lg.
    Wt.,
    lb.
    Sharpenable
    No.
    of
    Dia.
    Fasteners
    Included
    Each
    Each
    Pair
    Cutting Pattern—Straight, Right Curves, Left Curves
     
    Fixed Blade
    3"1/16"3/64"1/16"—SteelSteel7"14"9"18"18Yes31/2"No3796A200000003796A600000000
    3 1/8"1/8"1/16"1/8"—SteelSteel9"15"10"24"35Yes31/2"No3796A3000000003796A70000000
    4 1/4"3/16"1/8"3/16"—SteelSteel9"15"14"30"58Yes31/2"No3796A4000000003796A80000000
     
    Rotating Blade
    —1/16"3/64"1/16"2 1/2"SteelCast Iron8"12"7"16"49No41/2"No3796A1010000003796A10200000000
     
    back to top