We will reply to your message within an hour.
The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole.
Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit.
Choose the ID, OD, and length you need.
The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.
Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.
A dry film keeps the screw from sticking or binding in these inserts during installation.
Eliminating the need for primer, these inserts are coated to resist corrosion when installed in different materials.
These inserts have a high strength-to-weight ratio and resist acids and salt water better than nickel alloy and stainless steel inserts.
Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.
A distorted thread grips the screw to resist loosening.
Inserts come with a through-hole tap and installation tool.
Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.
The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.
Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.
Also known as Trisert inserts, these cut threads into plastic and have better holding power than press-fit inserts.