Filter by
Drive Size
Sold As
Grip Style
Overall Length
Length
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Impact Drivers
 |
 |
Hex |
 |
Phillips |
 |
Slotted |
Break stuck screws free using screwdriver bits. Strike the end of the handle with a hammer to turn the bit and tighten or loosen fasteners. Use these tools as an impact wrench without the bit adapter.
No. of Sizes | Sizes Included | Drive Size | Drive Direction | For Bit Hex Shank Size | Overall Lg. | Material | Bit Material | For Drive Style | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
3/8" Square Drive | ||||||||||||
| 5 | Phillips: No. 1, No. 2, No. 3, No. 4 Slotted: 3/8" | 3/8", No. 1, No. 2, No. 3, No. 4 | Clockwise and Counterclockwise | 5/16" | 5 1/4" | Black-Oxide Steel | Steel | Phillips, Slotted | 5610A3 | 000000 | ||
| 16 | Hex: 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm Phillips: No. 1, No. 2, No. 3, No. 4 Slotted: 1/4", 5/16", 3/8", 1/2" | 1/4", 5/16", 3/8", 1/2", 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, No. 1, No. 2, No. 3, No. 4 | Clockwise and Counterclockwise | 5/16" | 6 1/4" | Steel | Steel | Hex, Phillips, Slotted | 6967A13 | 00000 | ||
1/2" Square Drive | ||||||||||||
| 5 | Phillips: No. 1, No. 2, No. 3, No. 4 Slotted: 3/8" | 3/8", No. 1, No. 2, No. 3, No. 4 | Clockwise and Counterclockwise | 5/16" | 5 1/4" | Black-Oxide Steel | Steel | Phillips, Slotted | 5610A34 | 00000 | ||
Strikable Screwdrivers
 |  |
Strike with Hammer | Shown Using Hex-Shaped Bolster |
 |  |
Grooved Tip |
These are the toughest, most durable screwdrivers around. Whack them with a hammer to loosen stripped screws or pry off boards. Also known as demolition screwdrivers, their steel shaft extends all the way through the handle and there's a metal end cap for striking. If you need extra torque to turn a stubborn screw, grip the hex-shaped bolster at the top of the handle with a wrench.
Standard Length—The most common screwdriver length for a specific drive size.
Long—An extended shaft turns screws in deep recesses other screwdrivers can't reach.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
Grooved Tip—Bites into the screw slot for a firm hold, so you can make fast, easy turns without slippage.
Shaft | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Tip Texture | Material | Cap Material | Mfr. | Each | |||
Phillips | ||||||||||||
Premium | ||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A41 | 00000 | ||
| No. 2 | Standard | 8" | 4" | 1/4" | — | Nickel-Plated Steel | Steel | Wera | 7249A42 | 00000 | ||
| No. 3 | Standard | 10 1/4" | 6" | 5/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A43 | 00000 | ||
| No. 4 | Standard | 12 1/2" | 8" | 3/8" | — | Nickel-Plated Steel | Steel | Wera | 7249A44 | 00000 | ||
Slotted | ||||||||||||
Premium | ||||||||||||
| 3/16" | Standard | 7 7/16" | 3 1/2" | 3/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A32 | 0000 | ||
| 7/32" | Standard | 8 1/4" | 4" | 1/4" | — | Nickel-Plated Steel | Steel | Wera | 7249A33 | 00000 | ||
| 9/32" | Standard | 9" | 5" | 9/32" | — | Nickel-Plated Steel | Steel | Wera | 7249A34 | 00000 | ||
| 11/32" | Standard | 10 1/4" | 6" | 3/8" | — | Nickel-Plated Steel | Steel | Wera | 7249A35 | 00000 | ||
| 3/8" | Standard | 11 1/4" | 7" | 3/8" | — | Nickel-Plated Steel | Steel | Wera | 7249A36 | 00000 | ||
| 1/2" | Standard | 12 1/2" | 8" | 15/32" | — | Nickel-Plated Steel | Steel | Wera | 7249A37 | 00000 | ||
| 9/16" | Standard | 14 1/2" | 10" | 9/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A38 | 00000 | ||
Torx | ||||||||||||
Premium | ||||||||||||
| T15 | Standard | 7" | 3 1/8" | 3/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A72 | 0000 | ||
| T20 | Standard | 7 3/8" | 3 1/2" | 3/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A73 | 0000 | ||
| T25 | Standard | 8 1/16" | 4" | 1/4" | — | Nickel-Plated Steel | Steel | Wera | 7249A74 | 00000 | ||
| T27 | Standard | 9" | 5" | 1/4" | — | Nickel-Plated Steel | Steel | Wera | 7249A75 | 00000 | ||
| T30 | Standard | 10 5/16" | 6" | 5/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A76 | 00000 | ||
| T40 | Standard | 10 5/16" | 6" | 5/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A77 | 00000 | ||
JIS | ||||||||||||
Premium | ||||||||||||
| No. 1 | Standard | 6 15/16" | 3" | 7/32" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A82 | 00000 | ||
| No. 2 | Standard | 8 3/8" | 4" | 1/4" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A83 | 00000 | ||
| No. 2 | Long | 10 3/8" | 6" | 1/4" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A84 | 00000 | ||
| No. 3 | Standard | 10 15/16" | 6" | 5/16" | Grooved | Chrome-Plated Steel | Chrome-Plated Steel | Vessel | 7249A85 | 00000 | ||
Pozidriv® | ||||||||||||
Premium | ||||||||||||
| No. 1 | Standard | 7" | 3 1/8" | 3/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A62 | 00000 | ||
| No. 2 | Standard | 8 1/16" | 4" | 1/4" | — | Nickel-Plated Steel | Steel | Wera | 7249A63 | 00000 | ||
| No. 3 | Standard | 10 5/16" | 6" | 5/16" | — | Nickel-Plated Steel | Steel | Wera | 7249A64 | 00000 | ||
| No. 4 | Standard | 12 1/2" | 8" | 3/8" | — | Nickel-Plated Steel | Steel | Wera | 7249A65 | 00000 | ||
Strikable Screwdriver Sets
| |
Strike with Hammer | Shown Using Hex-Shaped Bolster |
 |
Keep on hand multiple sizes and drive styles of the toughest, most durable screwdrivers around. Whack them with a hammer to loosen stripped screws or pry off boards. Also known as demolition screwdrivers, their steel shaft extends all the way through the handle and there's a metal end cap for striking. If you need extra torque to turn a stubborn screw, grip the hex-shaped bolster at the top of the handle with a wrench.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Material | Cap Material | Mfr. | Container Type | Each | |||
|---|---|---|---|---|---|---|---|---|---|
Torx | |||||||||
Premium | |||||||||
| 6 | T15 Torx Screwdriver—3 1/8" O'all Lg. T20 Torx Screwdriver—3 9/16" O'all Lg. T25 Torx Screwdriver—3 15/16" O'all Lg. T27 Torx Screwdriver—4 15/16" O'all Lg. T30 Torx Screwdriver—4 15/16" O'all Lg. T40 Torx Screwdriver—5 15/16" O'all Lg. | Nickel-Plated Steel | Steel | Wera | Plastic Rack | 7249A101 | 000000 | ||
Phillips and Slotted | |||||||||
Premium | |||||||||
| 6 | 9/64" Slotted Screwdriver—6 3/8" O'all Lg. 3/16" Slotted Screwdriver—7 7/16" O'all Lg. 7/32" Slotted Screwdriver—8 1/4" O'all Lg. 9/32" Slotted Screwdriver—9" O'all Lg. No. 1 Phillips Screwdriver—7" O'all Lg. No. 2 Phillips Screwdriver—8" O'all Lg. | Nickel-Plated Steel | Steel | Wera | Plastic Rack | 7249A51 | 00000 | ||
Phillips, Slotted, Torx, and Pozidriv® | |||||||||
Premium | |||||||||
| 13 | 7/64" Slotted Screwdriver—3 9/16" O'all Lg. 9/64" Slotted Screwdriver—3 1/8" O'all Lg. 7/32" Slotted Screwdriver—3 15/16" O'all Lg. 9/32" Slotted Screwdriver—4 15/16" O'all Lg. 11/32" Slotted Screwdriver—5 15/16" O'all Lg. No. 1 Phillips Screwdriver—3 1/8" O'all Lg. No. 1 Pozidriv Screwdriver—3 1/8" O'all Lg. No. 2 Phillips Screwdriver—3 15/16" O'all Lg. No. 2 Pozidriv Screwdriver—3 15/16" O'all Lg. No. 3 Phillips Screwdriver—5 7/8" O'all Lg. No. 3 Pozidriv Screwdriver—5 7/8" O'all Lg. T20 Torx Screwdriver—3 9/16" O'all Lg. T25 Torx Screwdriver—3 15/16" O'all Lg. | Nickel-Plated Steel | Steel | Wera | Plastic Rack | 7249A102 | 000000 | ||
Hammer-Driven Impact Wrenches
Antislip-Grip Screwdriver Sets
 |
The drivers in these sets have textured handles to ensure a firm grip, even with wet or oily hands. They're ideal for machinists, maintenance technicians, and anyone working in dirty environments. The handles are also contoured to maximize comfort and reduce hand strain, fatigue, and blisters, even with extended use.
Premium—The best screwdrivers available, with tips machined to tight tolerances for the tightest possible fit in fastener recesses. The snug fit means they'll turn screws quickly without wearing screw heads and the driver's tip.
No. of Pieces | Includes | Material | Mfr. | Each | |||
|---|---|---|---|---|---|---|---|
Phillips and Slotted | |||||||
Premium | |||||||
| 5 | 7/32" Slotted Screwdriver—8 1/2" O'all Lg. 1/4" Slotted Screwdriver—9 1/2" O'all Lg. 5/16" Slotted Screwdriver—10 3/4" O'all Lg. No. 1 Phillips Screwdriver—7 5/16" O'all Lg. No. 2 Phillips Screwdriver—8 1/2" O'all Lg. | Chrome-Plated Steel | Wiha | 52915A51 | 000000 | ||
Striking Square Drive Impact Wrenches
Antislip-Grip Screwdrivers
 |
Shaft | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Relative Lg. | Overall Lg. | Lg. | Overall Wd. | Material | Mfr. | Each | |||
Phillips | ||||||||||
Premium | ||||||||||
| No. 1 | Standard | 7 5/16" | 3 1/8" | 3/16" | Chrome-Plated Steel | Wiha | 52915A46 | 000000 | ||
| No. 2 | Standard | 8 1/2" | 3 15/16" | 1/4" | Chrome-Plated Steel | Wiha | 52915A47 | 00000 | ||
| No. 3 | Standard | 10 3/4" | 5 15/16" | 5/16" | Chrome-Plated Steel | Wiha | 52915A48 | 00000 | ||
Slotted | ||||||||||
Premium | ||||||||||
| 3/16" | Standard | 7 15/16" | 3 5/8" | 1/4" | Chrome-Plated Steel | Wiha | 52915A41 | 00000 | ||
| 7/32" | Standard | 8 1/2" | 3 15/16" | 9/32" | Chrome-Plated Steel | Wiha | 52915A42 | 00000 | ||
| 1/4" | Standard | 9 1/2" | 5" | 5/16" | Chrome-Plated Steel | Wiha | 52915A43 | 00000 | ||
| 5/16" | Standard | 10 3/4" | 5 15/16" | 13/32" | Chrome-Plated Steel | Wiha | 52915A44 | 00000 | ||
| 3/8" | Standard | 11 3/4" | 7" | 7/16" | Chrome-Plated Steel | Wiha | 52915A45 | 00000 | ||
