McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    11 Products

    Replaceable-Face Dead Blow Mallets

    The replaceable faces can be changed out when worn. These mallets have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. The polyurethane rubber faces resist oils and solvents and won't crack under high impact; they're often used on plastic, wood, and sheet metal. To avoid marring when tapping or striking, choose a face that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. The handle has a ribbed grip for slip resistance.
    Round Screw-In Polyurethane Rubber Face
    Image of Product. Front orientation. Hammers. Replaceable-Face Dead Blow Mallets , Round Screw-In Polyurethane Rubber Face.
    Hickory Handle—Hickory handles resist vibration.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face
    Head Wt.,
    lb.
    Face
    Dia.
    Face Hardness Rating (Face Color)
    Thread
    Size
    Thread
    Type
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Hickory Handle—Ribbed Grip
    1 7/81 1/2" Medium (Green) × Extra Hard (Black)5/16"-18
    		UNC
    		13"IronYes0000000000000
     
    Polyurethane Rubber Faces
    Image of Product. Front orientation. Hammer Faces. Replaceable-Face Dead Blow Mallets , Polyurethane Rubber Face.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball.
    Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.
    Face
    Soft (Orange)
    Medium (Green)
    Hard (Red)
    Extra Hard
    (Black)
    Face
    Dia.
    Thread
    Size
    Thread
    Type
    Each
    Each
    Each
    Each
    Screw-In Polyurethane Rubber Faces
    1 1/2"5/16"-18
    		UNC
    		0000000000000000000000000000000000000000000000000000
     

    Mallets

    Drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with faces that are softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
    SBR FaceAbout SBR Face
    Image of Product. Style B. Front orientation. Style B. Mallets .

    Style B

    Image of Product. Style C. Front orientation. Style C. Mallets .

    Style C

    SBR faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Hickory Handle—Hickory handles resist vibration.
    Fiberglass Handle—Fiberglass handles combine the strength of steel with the vibration resistance of wood.
    White Face—White SBR faces are nonmarking.
    Soft Face—Soft faces have a hardness similar to that of a tire tread.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Black Face
    White Face
    Style
    Head Wt.,
    lb.
    Face
    Dia.
    Face Hardness
    Rating
    Overall
    Lg.
    Grip
    Style
    Handle
    Replaceable
    Each
    Each
    Hickory Handle
    C1 7/82 1/2"Soft15 1/2"PlainNo000000000000000000000000
     
    Fiberglass Handle
    B1 7/82 1/2"Soft15 1/2"PlainNo———0000000000000
     

    Nail Hammers

    Image of Product. Front orientation. Hammers. Nail Hammers , Textured Grip, Steel Handle.

    Steel Handle

    Textured Grip

    Image of Specification. Front orientation. ZoomedIn view. Serrated Face. Nail Hammers .
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Straight Claw. Nail Hammers .

    Serrated Face

    Straight

    Claw

    Drive nails with the flat, steel face and remove them with the claw on the other end of the head.
    For replacement handles, see Hickory Hammer Handles.
    Steel Handle—Steel handles are stronger than wooden handles but have less vibration resistance.
    Textured Grip—Textured grips provide slip resistance.
    Serrated Face—Serrated face prevents the head from slipping when striking.
    Straight Claw—Straight-claw hammers are also known as framing hammers. They're a good choice for ripping and prying wood in addition to nail removal, but they do not remove nails as efficiently as curved-claw hammers.
    Face
    Straight Claw
    Head Wt.,
    oz.
    Dia.
    Material
    Overall
    Lg.
    Handle
    Replaceable
    Each
    Steel Handle—Textured Grip
     
    Serrated Face
    301 1/2"Steel16"No0000000000000
     

    Replaceable-Face Mallets

    Replace faces when they become worn rather than replacing the entire tool. These mallets are suitable for driving chisels and striking work without damaging its surface. Choose a mallet with a face that's softer than your workpiece to avoid marring it when tapping or striking. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.
    Press-Fit Nylon Face
    Image of Product. Front orientation. Hammers. Replaceable-Face Mallets , Press-Fit Nylon Face, Plain Grip.

    Plain Grip

    Nylon faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.
    Ash Handle—Ash handles resist vibration.
    Hard Face—Hard faces have a hardness similar to that of a bowling ball.
    Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.
    Mallets
    Replacement
    Hammer Faces
    Head Wt.,
    lb.
    Face
    Dia.
    Face Hardness Rating
    (Face Color)
    Overall
    Lg.
    Head
    Material
    Handle
    Replaceable
    Each
    Each
    Ash Handle with Plain Grip
    1 7/82"Hard (White)13 1/2"ZincYes00000000000000000000000000
     
    back to top