About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox.

These medium duty tools have more than double the punching force of compact portable lever-operated punches.

Use twice the punching force of standard extended-reach punches to make holes in structural steel channels and angle iron.

Roller bearings in the lever provide low-effort punching.

Strengthened edges cut holes up to 4" dia. in fabric, leather, rubber, and soft metal. Also known as arch punches.

Make oblong holes in fabric, leather, and rubber. Also known as arch punches.

For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.

Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.

Quickly switch between inner and outer punches to create washers faster than with standard sets.

Forged steel makes the body of this punch more durable than the Economy Plier-Action Multiple-Size Hole Punch.

Squeeze the spring-return handle to punch round holes of a single size.

Includes all six sizes of our individually sold hand-driven hole punches plus a tool to remove punched out material.

These steel punches cut through aluminum and steel fast to make openings for DB connectors.

The driver supplies eight tons of force to the hole punches in this set to make straight punches.

Rotate the angled head of the driver up to 180° to fit it into tight spaces and supply eight tons of force to the hole punches.

Punch conduit up to size 1 1/4.

Knock out pins and rivets that have already been loosened. These tools are also known as pin punches.

The knurled handle of these punches offers a more secure grip than standard punches. Use pin-removal punches to knock out pins and rivets that have already been loosened.

The rounded tip of these punches fits into the open ends of hollow and spring pins to protect them from damage during removal.

Loosen pins and rivets before removal.

A hammer and punch in one, this tool knocks out pins, rivets, and bolts.

Use these sets to knock out pins and rivets that have already been loosened.

The punches in these sets have a knurled handle, which offers a more secure grip than standard punches. Use them to knock out pins and rivets that have already been loosened.

Line up holes by driving these pins through existing rivet, pin, and bolt holes in multiple pieces of metal. Alternatively known as lineup taper punches.

Often called bull pins, these pins are designed to resist mushrooming caused by repeated pounding.

These brass tools reduce marring on metal surfaces because they're softer than steel punches.

Made from aluminum-bronze that is Factory Mutual approved, these nonmagnetic, corrosion-resistant tools inhibit sparking. They satisfy OSHA requirements for nonsparking tools.

The tapered shaft of these pins eliminates the need for hammering and prying when aligning flange bolt holes.

Punch a hole in your material to prepare for the installation of fabric grommets. Strike these tools with a mallet.

These punches set grommets that have an extended-neck tooth lock washer.

Set nails flush or drive them out of view without damaging wood surfaces.

Contains pin-loosening, pin-removal, and center-marking punches as well as chisels.

Fit these through existing holes and mark the center of the hole in a second workpiece.

These sets come with three punches for use with a variety of hole sizes. Insert one into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size.

Push down on the spring-loaded cone to center the punch in a variety of round and square hole sizes.

Also known as blind-hole spotters, these punches fit into closed-end holes and mark the center of a complementary hole.

Also known as transfer screws, these punches have a uniform shoulder height so you can quickly transfer multiple hole locations at once.

Also known as transfer screws, these punches have a uniform shoulder height so you can quickly transfer multiple hole locations at once.

Locate and mark the centerline on rods, tubes, and pipes, lay out keyways, and establish angles for connections.

With an internal spring mechanism, these punches offer one-hand operation when marking hole centers.

Also known as center punches, strike these with a hammer to mark hole centers in metal and other materials.

Use the Starrett punches in these sets to mark hole centers in metal and other materials. Also known as center punches.

Strike these Starrett punches with a hammer to mark hole centers in metal and other materials. Also known as center punches.

Punch soft materials and scribe lines in metal and wood.

These stamps have a solid face.

Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals.

Made from 440C stainless steel, these stamps won't rust and flake with exposure to moisture and chemicals. They're strong enough to make marks on surfaces with a Rockwell hardness up to C50, including other stainless steels and heat-treated steel.

The thick shank provides more control for more consistent marks than our standard metal stamps. Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals. Stamps are steel.

Create raised lettering similar to a license plate with these reverse-face stamps. Impressions are made on the backside of metals for an embossed character on the front.

Make marks on surfaces with a Rockwell hardness up to C30, including leather, wood, and most metals.

Made from 440C stainless steel, these stamps won't rust and flake with exposure to moisture and chemicals. They're strong enough to make marks on surfaces with a Rockwell hardness up to C50, including other stainless steels and heat-treated steel.

These stamps have a solid face.

Create raised lettering similar to a license plate with these reverse-face stamps. Impressions are made on the backside of metals for an embossed character on the front.

Mark keys with common messages such as "Do Not Copy" and "Master".

These stamps provide an entire number set in the convenience of one handheld stamp. Rotate the wheel to change the character.

Mark surfaces with unique characters for traceability, quality control, and inspection.

These pins have a flat head to fit into a counterbored hole.

Use these pins with a die to punch 1/8" and larger holes. Pins can be modified to fit your application.

Compared to standard ejector pins, these pins are less likely to chip and crack when used to push steel parts out of molds because they've been hardened through their core. Also known as knockout and forged pins.

To fit in holes that have widened from wear and are too big for standard ejector pins, these pins are oversized. Also known as knockout and forged pins.

Kits include a hand punch tool with die and six complete snaps with tapping screw studs.

Line up two pipe flanges and determine pipe angle with the included nut-and bolt pins, level, and protractor.

Ensure horizontal alignment of pipe flanges with a level rod that runs between two alignment pins.