Sand by hand with comfort and control.

Keep a variety of sanding blocks on hand to smooth workpieces of all shapes and sizes.

Keep your environment clean and prevent dust from clogging your abrasive—these blocks have vacuum holes and a dust extraction port.

Attach sanding discs to these hand sanding blocks.

Originally designed to repair the clear coat on cars, these sanders smooth out imperfections on your most delicate workpieces. With a 1 1/4" disc that moves in a very small circular pattern, they remove tiny specks of dust that are trapped in the finish.

Dissipate electrostatic discharge (ESD) for safety when sanding. Also known as random orbital sanders, these sanders move in small irregular circles.

For tough jobs, these sanders use roughly 1.5 times more air than standard air-powered disc sanders.

For quick jobs where you don’t have access to a power source, these sanders are battery-powered. They’re more aggressive than orbital disc sanders because they use rotary motion to remove more material.

These sanders have a belt-release lever for quick changes.

Take these battery-powered belt sanders wherever you need them for quick jobs—no outlet or air power required.

Leave your material with a more uniform finish than if you used a standard sheet sander. Also known as random orbital sanders, these sanders move in small irregular circles.

Shaped to squeeze into tight spaces—edges, corners, and angled surfaces—these compact sanders smooth out imperfections.

Sand ceilings and walls with the power of an electric pole sander when you don’t have an outlet nearby.

A coating prevents dust and debris from building up on the abrasive surface.

Stick these sheets to a hand sanding block for a more secure grip than hook and loop sanding sheets.

These assortments include a selection of sanding sponges with long-lasting diamond abrasive on one side. Flexible enough to sand around curves and in corners, they provide the comfort and control of a sanding block.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block.

Keep a selection of flat and angled sponges with various grits on hand.

These sponges conform exceptionally well to small, contoured surfaces.

A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

The grit particles are block shaped and cut slowly.

A selection of 40 emery and crocus sanding sheets are included in these assortments.

Keep sanding sheets of various grits on hand.

These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.

Keep a variety of grits on hand, so you always have the right one for the job. These sheets won’t deteriorate when used wet or with grease, chemicals, cutting fluids, and other solvents.

Assortments include three cut-to-length sanding rolls of various grits that resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents.

Keep an assortment of sheets that prevent dust and debris from building up on the abrasive surface close at hand.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

Keep a variety of grits on hand, so you can get the finish you need. You won’t have to worry about these sanding sheets getting clogged or deteriorating when used wet.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh rolls over paper- or cloth-backed rolls.

Holes allow dust removal when used with a vacuum sander to prevent buildup of debris on the abrasive surface.

Cut the length you need, then quickly attach, remove, and reuse.

Quickly attach, remove, and reuse.

One of the sharpest abrasives, the silicon carbide on these rolls sands aluminum, copper, plastic, and rubber with ease, generating minimal heat to prevent material buildup.

Peel and stick to your sanding tool. When it’s time to change the sheet, peel it off.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

Built for wet sanding joint compound on drywall and plaster, these sanding sheets won’t fall apart when used with water. They also withstand grease, chemicals, cutting fluids, and other solvents that may be on your work surface.

Sharper than silicon carbide and harder than ceramic alumina, the diamond abrasive on these sheets is ideal for sanding concrete, fiberglass, and other tough materials.

Peel and stick these sheets to your detail sander whenever it’s time for fresh grit.

Stick these sheets to your dust-collecting detail sander to smooth edges, corners, and other tight spaces.

These sheets have a long-lasting diamond abrasive.

Finish and polish metals without producing dust.

The abrasive in these blocks wears evenly to maintain a flat surface. They can be used to remove burrs from metal die fixtures and machine parts or to clean magnetic chucks.