Safe for use in environments where hazardous material is present, these headlamps shine light on your work while keeping your hands free. With built-in LEDs, they produce more light, are more efficient, and generate less heat than headlamps with other light technologies. All cast a uniform beam that is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufactures have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Clip these headlamps right into a mount on your tactical or rescue helmet. You can also clip them onto your gear’s MOLLE strap. These headlamps all have multiple LED color options for different scenarios. Use the red or blue beam in low-light environments to preserve your night vision. The blue beam lets you see more details and color differences than the red beam—you can even read. The green beam shows more contrast than red and blue beams, but it can interfere with your ability to see in dark conditions. Meeting ANSI/Plato F1, these lights have been tested for light output, impact resistance, and run time.

Style A are best for close-up tasks and inspection work—they produce a flood beam with an even spread of light. Direct the light where you need it with the bendable arm. You can program the order the beam colors appear with each push of the button based on your preference. Rated IP04, these headlamps are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. They include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style B are best for lighting up long distances where water is a concern. Our most water-resistant option, they’re rated IP08 to handle prolonged submersion. Their spot beam has a bright center to illuminate faraway objects. When wearing night-vision goggles, switch these headlamps to infrared light to see clear, crisp images in dim light or pitch black. You can also program the order that the beam colors appear with each push of a button based on your preference. Bend the arm to direct light where you need it. To keep them from turning on accidentally, they have a digital lockout option. These headlamps include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style C project light the farthest of these headlamps. Tilt them up to 90° to point light where you need it. To view clear images through night-vision goggles in dim light or pitch black, switch them to infrared light. A digital lockout option keeps the beam from turning on accidentally. IP07-rated for temporary submersion, they’ll keep working if you drop them in water. These headlamps are compatible with NVG mounts and include a strap if you want to wear them without a helmet.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap. A strong magnet connects the light to the attachments, so swap between them in a snap. When you need close-up illumination, detach the light and hold it as a task light.

Rated IP54, these headlamps are sealed against dust and splashing liquids. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as brightness, battery life, and beam distance. On the high beam, these lamps will illuminate the length of a football field.

Twist the head to adjust from a narrow spotlight to a wide floodlight. These headlamps are rechargeable and include a spare rechargeable battery. If you aren’t near an outlet or you can’t wait for a recharge, they’ll also run on three disposable AAA batteries.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B have lights all around the head band for 360° visibility. You can turn the front and band light on separately or simultaneously. Battery life is measured when all lights are on. They include a rubber strap you can wrap around a hard hat—no hard hat clips required. These headlamps are rated for temporary submersion in water.

Style A have a memory function that defaults to your preferred light combination when you first turn them on.

Style B headlamps will last a full shift. Quickly swap out their disposable batteries—no need to wait for a charge. Their reflective band keeps you visible to vehicles even when the light is turned off.

Style C are a lower cost alternative that has a red light in back so people can see you when it is dark. However, they don’t have lights all around the head band. The front light has a dial to dim the light anywhere from high to low for precise lighting control. They are a good choice for wearing on your head rather than on a hard hat. Rated IP54, they’re sealed against dust and splashing water.

Headlamps with a spot beam have a bright center for lighting up long distances. Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision. The green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions.

Clip these little flashlights to a baseball cap or a surface to light up your work. They cast a flood beam with a uniform spread of light that’s ideal for close-up tasks.

Styles A-D can clip onto the brim of a hat. These flashlights are also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A come with an elastic band, so you can wear them as a headlamp.

Style C have a gooseneck arm to direct light where you need it. This makes them a good fit for pockets and clipboards.

Style D have a magnetic back you can stick to metal surfaces, and their two-way clip fits over pockets, straps, and other surfaces. The head rotates 180° to aim light where you need it.

Style E clip onto a grease gun nozzle or air hose.

On flashlights with color options, the green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions. The red beam lets you see in low light without disrupting your night vision.

IP04- and IP54-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. IP54-rated flashlights are sealed against dust.

The handle opens into a tripod, so you can shine light on your work while keeping your hands free. The head on these flashlights tilts 120°, which allows you to direct the beam exactly where it's needed. When the tripod is closed, they can be carried like a standard flashlight. These flashlights have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. Good for close-up tasks and inspection work, these flashlights cast a flood beam to evenly distribute light.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away. You can also stand them on their end to use them as a task light. These flashlights cast a spot beam with a bright center that reaches long distances. To let you know when to recharge, they have a status indicator. These flashlights meet ANSI/PLATO FL 1, so they’ve been tested for light output, impact resistance, and battery life. Each flashlight comes with a shoulder strap for easy transport.

Flashlights with a 120° head tilt have a ribbed grip that won’t slip out of your hand.

Flashlights with a 340° head tilt have a handle that pivots open, so you can hang them from a ladder or pipe to light up work from above. If you hang them, they’re durable enough to keep working if they fall from 6 feet.

IP04-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. IP67-rated flashlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re also sealed against dust.

If the power goes out, you’ll find these flashlights right away. Store them in an area that gets a lot of natural or artificial light—they’ll absorb the light and emit it in the dark. All have a nonslip grip.

Style A and C have a magnet to stick onto easily accessible magnetic surfaces, such as machines. Style C are the best choice if you need a task light. The head tilts to point light where you need it, and the bottom is flat so you can stand them up and work hands-free. In addition to a magnet, these flashlights have a clip for securing near your work.

Style B come stored in a clear case you can mount to the wall. Mounting hardware is included.

Flashlights with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work. Flashlights with a spot beam have a bright center for lighting up long distances. Flashlights with a spot/flood beam emit both types of light at the same time.

Flashlights that meet ANSI/PLATO FL 1 standards have been tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP08-rated flashlights withstand prolonged submersion, so they’ll still work if you drop them in water.

When the power goes out, these flashlights automatically light up. Keep them plugged in, and they'll switch on when there's an outage. The head tilts so you can aim light wherever you need it. Unplug them to carry them around and use them like a standard flashlight. They have a flat bottom, so you can work hands-free without them rolling away. And if you need a task light, stand them on their end and tilt the light at a right angle. Ideal for lighting up long distances, they cast a spot beam with a bright center. The status indicator lets you know when they need a recharge. Rated IP04, these flashlights withstand liquid splashed from all angles.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present. They're intrinsically safe for NEC Class I, Division I Groups A, B, C, and D hazardous locations. This means they won't ignite an explosion. With long-lasting, built-in LEDs, they’re more efficient and generate less heat than flashlights with other light technologies. These flashlights cast a spot beam that is bright at the center for long-distance illumination.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. These flashlights are rated for use in environments where hazardous material is present. They’re also rated IP04 to withstand liquid splashed from all angles. With long-lasting, built-in LEDs, these flashlights are more efficient and generate less heat than flashlights with other light technologies. They cast a uniform beam that is especially good for close-up tasks and inspection work. Use the mounting magnet, clip, or retractable hook when you need to keep your hands free for work.

Rechargeable flashlight comes with a 120-volt AC charger that includes a 12-volt DC charging cord. This flashlight cannot be sold to Canada due to local energy efficiency regulations.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Free your hands for other work by mounting a flashlight (not included) to a nearby surface.

Clamp-on mounts hug table edges and other surfaces up to 2" thick. Tighten them as needed for a secure hold.

Clip-on mounts grab onto surfaces with a mounting clip, so they’re easy to move around your workspace.

Magnetic mounts quickly snap onto metal surfaces, making them easy to place, remove, and reinstall.

Attach mini and full-size flashlights to a hard hat and keep your hands free for work. Mount the clip to the brim or insert it into the slot on the side of a hard hat.

Light up your work from under your brim. These lights clip onto the rim of a cap or hard hat to keep your hands free from holding a flashlight. They have LED bulbs, which are brighter and less hot than incandescent and halogen bulbs. You can adjust how many lights you have on—one, three, or all five. Or you can set the lights to flash.

Wear a flashlight around your neck to keep your hands free. These lights are great when you need to wear a brimmed hat or other head gear that would interfere with a headlamp. Bend and angle the adjustable arms and they’ll stay in place. You can also wrap them around nearby objects and point them where you need light. They flood the area with a uniform beam, which is particularly good for up-close and inspection tasks.

Aim light where it’s needed most in areas that don't have an electrical outlet.

Lights with rechargeable batteries include a USB charging cord.

Style A swivel like a joystick to aim light. They also have a magnet on the back, so you can pop them on most metal surfaces.

Style B have a large head to cast even light with minimal glare and shadows. You can pivot the head up and down and rotate the head side to side to aim light. The stand has magnets for attaching these lights to most metal surfaces. A swivel hook unfolds from the back of the lights, so you can hang them.

Style C have a light on the end, so they can be used as a flashlight. Use the flashlight when you need a narrow beam and unfold the head to cast light widely. For hands-free use, they have a magnet and a hook on the base.

Style D show the most accurate colors possible with LEDs, helping you to distinguish similar hues. Use them where color identification is critical, such as paint inspection and wiring. Unfold the head and twist it side to side to aim light. These lights turn on as soon as you unfold the head. A battery indicator shows you how much charge you have left.

Style E help you find fluid leaks and detect flaws and contaminants on a surface—they have an ultraviolet light in addition to a white light. Their white light helps you distinguish similar hues. They show color more accurately than most LEDs. Use them where color identification is critical, such as paint inspection and wiring. The base is magnetic, so you can attach them to most metal surfaces, and a hook folds out for hanging. Designed tough, they can withstand a drop from up to 6 feet without breaking.

Style F and G have a hook that swivels and a magnet on the base to give you a variety of options when mounting them. Style F have a flashlight for when you need a narrow beam.

Lights with daylight light appearance produce white and blue tones, mimicking natural daylight, for a crisp, clear light that’s ideal for inspecting. Lights with a neutral light appearance are commonly used in workspaces.

Lights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Provide 360° of lighting with these lanterns. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

Style C have a handle that folds down for compact storage.

IP04-rated lanterns keep out dripping, splashing, and falling liquids, as well as humidity. IP07-rated lanterns withstand temporary submersion, so they’ll still work if you drop them in water.

Lanterns that meet ANSI/PLATO FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Light up enclosures and other spaces without wiring. These lights even work outdoors—rated IP07, they can be temporarily submerged, so rain is no problem. They also have a rigid exterior that resists shocks. With a 17-hour battery life, they’ll give you years of light if used intermittently. After you remove them, they won’t leave a sticky residue. These lights meet ANSI/Plato FL 1, so they’ve been tested for light output, impact resistance, and run time.

Ditch the flashlight and bulky headlamp—these bump caps have LEDs under their brim to light your way. Often used in crawlspaces and in other tight spots, these bump caps have a rigid frame that protects your head from bumps and scrapes. To keep you comfortable, these caps have foam padding and cooling vents. Turn them on or off with the push of a button.

For replacement batteries, see CR2032 batteries.

Fluorescent yellow bump caps make you easy to spot in any lighting.

Weld with the same quality as you would in bright conditions. These helmets have a built-in LED light that brightens your workspace, so you can see your weld and maintain precision even in dark areas. Turn the LED light on with the press of a button, and when it detects an arc or intense light, the light automatically turns off.

As you begin to weld, four arc sensors detect the light and automatically darken the lens. Unlike traditional green welding lenses, these helmets use a true color lens to enhance clarity and color accuracy. They have digital controls behind the lens where you can set the shade number, delay time, and sensitivity. To switch to grind mode without removing your helmet, use the button above the lens.

Mount these helmets to a hard-hat adapter when working in areas that require extra head protection. Attach magnifying lenses to see details better.

Optical clarity measures how clearly a welder can see through the lens based on four categories: visual accuracy, light diffusion, consistency, and distortion. Each category is given a rating on a scale of 1 to 3. The lower the number, the better the clarity. Better optical clarity allows for precise welds, reduces eye strain, and improves focus.

Light up your space when you’re working in cold conditions. These hats have built-in LEDs, so you don’t need to wear a headlamp or hold a flashlight. Made of stretchy fabric, they fit snugly on your head to trap heat. Press a button on the front of the hat to turn the lights on or off. You can also use the button to change the distance setting: the beam angles down for close-up tasks or illuminates up to 72 feet ahead. These hats come with four replaceable batteries that power the lights for up to 68 hours.