Glow-in-the-Dark Hard Hats
Stand out in low light—often used for construction underground or at night, these hard hats glow for up to 48 hours. Rated Type I, Class E, they protect against blows to the top of the head and are tested at 20,000 volts for electrical insulation. To adjust the fit, turn the ratchet in the back. These hard hats have a sweatband to keep perspiration out of your eyes.
Hard hats with a full brim keep rain and sun off your face, neck, and the sides of your head.
Hard hats with reversible suspension let you swing the brim to the back of your head without taking them off or adjusting the suspension. They also have mounting slots for attachments such as face shields and earmuffs.
Hard Hats | Replacement Suspensions | Replacement Sweatbands | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| No. of Suspension Points | Material | Hat Size | Weight, oz. | Min. Temp., °F | Mounting Slots | Features | Specifications Met | Color | Each | Each | Pkg. | |||
Cap Brim—Class E | ||||||||||||||
Ratchet Adjustment | ||||||||||||||
| 6 | Polyethylene Plastic | 6 1/2-8 | 13.5 | -22° | Yes | Reversible Suspension | ANSI/ISEA Z89.1, ASTM E2073 | Glow-in-the-Dark Green | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 000000 |
Full Brim—Class E | ||||||||||||||
Ratchet Adjustment | ||||||||||||||
| 6 | Polyethylene Plastic | 6 1/2-8 | 17.5 | -22° | No | __ | ANSI/ISEA Z89.1, ASTM E2073 | Glow-in-the-Dark Green | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
Arc-Flash-Protection Face Shields
Protect your face from low-level arc flashes when a full hood is not necessary. These shields meet NFPA 70E standards for protection against electrical arc flashes for personal protective equipment (PPE) category 2. Choose shields that meet the arc rated PPE category required by your workplace.
The shields meet ANSI/ISEA Z87.1 basic impact standards when worn with safety glasses or goggles. The lens on these shields flips up, so you can keep your hard hat on during breaks from electrical work. All hard hats have a ratchet suspension that adjusts with an easy-turn knob.
Shields with a green lens have a light tint that absorbs visible light and blocks glare. They let through 55% of visible light. While the green tint reduces glare, it also distorts colors, which may limit your ability to distinguish them.
Shields with a bronze or gray lens allow all wavelengths of visible light to pass through without distorting colors. They’re ideal for electrical workers who work with colored wires or electrical tape.
Shields with a chin guard protect your face from below. Those with side guards extend protection on the sides.
Face Shields | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lens | Replacement Lenses | |||||||||||||
| Arc Rated PPE Category  | Arc Rating, cal/cm2 | No. of Suspension Points | Color | Material | Ht. | Wd. | Thick. | Material | Hat Size | Features | Each | Each | ||
Flip-Up Lens | ||||||||||||||
| 2 | 12 | 4 | Green | Polycarbonate Plastic | 20" | 9 3/4" | 0.06" | Polyethylene Plastic | 6 1/2-8 | __ | 00000000 | 0000000 | 00000000 | 0000000 |
| 2 | 12 | 4 | Bronze | Polycarbonate Plastic | 12" | 8" | 0.09" | Polyethylene Plastic | 6 1/2-8 | Chin Guard | 0000000 | 000000 | 000000 | 00 |
| 2 | 41 | 6 | Gray | Polycarbonate Plastic | 15" | 8" | 0.1" | Polycarbonate Plastic | 6 1/2-8 | Chin Guard, Side Guards | 00000000 | 000000 | 000000 | 00 |