ISO 6506-2 Hardness Tester Indenters

Filter by

Ball Indenter Diameter

For Use On

Specifications Met

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

2 Products

Ball Indenters for Brinell Hardness Tests

A key component of Brinell hardness testers, these ball indenters are hard enough to make impressions on most metal. Shallow indentations mean a material is hard and deep indentations show that it is soft. Use the diameter of the indentations created by these balls as part of the calculation to find your material’s hardness rating.

2.5 mm Diameter Ball Indenter—2.5 mm diameter ball indenters are a good choice when testing material with limited space for measuring or material that is thin and may fracture under heavy loads. They make less contact when indenting your material surface than larger diameter indenters.

10 mm Diameter Ball Indenter—10 mm diameter ball indenters are the most commonly used and work well for testing soft material that might deform under heavy loads. They have a large contact area when indenting your material surface, so they distribute the applied load over a larger surface area than smaller diameter indenters. This means there is less stress and pressure at the indentation site.

Carbide Ball Indenter—Made of carbide, these ball indenters won’t deform as they press into hard material.

ASTM E10 and ISO 6506-2—These ball indenters meet ASTM E10 and ISO 6506 standards for Brinell hardness testing.

Shank Diameter—The shank diameter is a standard size for bench-top Brinell hardness testers.

	Ball Indenter		Shank, mm
	Dia., mm	Material	Lg.	Dia.	Overall Lg., mm	Hardness Measuring Range	Specs. Met		Each
For Steel, Iron, Stainless Steel, Aluminum, and Copper



		2.5	Carbide	12	6.35	29	Brinell 95 to Brinell 650	ASTM E10, ISO 6506-2	7896N12	0000000


		10	Carbide	12	6.35	29	Brinell 95 to Brinell 650	ASTM E10, ISO 6506-2	7896N11	000000