These hats meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These hats are made of abrasion-resistant aramid/viscose blend fabric, which keeps you warm without accumulating moisture.

Protect your head from flames and arc flashes while keeping sweat and sun out of your eyes. These hats meet NFPA 70E standards for arc flash protection. They’re rated PPE category 2, which is the most common arc flash standard for industrial applications. Made of a cotton/nylon blend, these hats resist flames and withstand wear. They’re also breathable to keep you cool in hot environments. Adjust the hook-and-loop strap on the back to secure them on your head.

Check the PPE category and minimum arc rating provided for your workplace, and select all required clothing and personal protective equipment to meet that rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance.

These face masks meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These hats are made of abrasion-resistant aramid/viscose blend fabric, which keeps you warm without accumulating moisture.

Shield your face and neck from flame and electrical hazards while working in the cold. These gaiters meet NFPA 70E and 2112 standards for protection from arc flash and flash fire. They’re rated PPE category 2, which is the most common arc flash standard for industrial applications. Made from a modacrylic fabric, these gaiters are lightweight and flexible. They trap heat but allow moisture to escape, so you stay warm and dry. They have four-way stretch for a customizable fit—fold them in half for a double layer of protection and warmth.

Check the PPE category and minimum arc rating provided for your workplace, and select all required clothing and personal protective equipment to meet that rating.

Keep cool while staying shielded from flame and electrical hazards. These gaiters meet NFPA 70E standards for protection against flames and arc flashes. Made from flame-resistant fabric, these gaiters defend against radiant heat and sparks while remaining soft and comfortable. They wick moisture from your head and neck to keep you cool and are easy to breath through when worn as a face covering. With UPF 50 sun protection, they block 98% of UV rays from reaching your skin. An odor-resistant treatment prevents bacteria growth, eliminating odors caused by sweat.

Check the PPE category and minimum arc rating provided for your workplace, and select all required clothing and personal protective equipment to meet that rating. These gaiters meet Category 1, the lowest level of arc-rated PPE.

Often used in utility work, metalworking, and welding, these hard-hat liners meet NFPA 70E to protect from flames and electrical arc flashes. They also shield your head and nape from the wind and cold. Secure the liner to your hard hat with the attached hook and loop tabs on each side. Choose a hard-hat liner that meets the arc rated personal protective equipment (PPE) category required by your workplace.

Liners with head, nape, and neck coverage have two layers of insulation inside the flame-resistant shell to protect against the cold: a mid-layer of aramid/modacrylic fabric and an inner layer of cotton/modacrylic fleece.

Liners with a removable nape cover allow you to cool off your nape by zipping off the back. With the nape cover removed, the liner protects the head like a cap.

Use liners with warming pad slots for extra warmth around the ears—slip hand warmer pads (sold separately) into the slots on each side.

Add masks to protect your mouth, chin, and nose. They have hook and loop tabs on each side that stick to the sides of the liner.

These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks. They are designed to meet NFPA 1971 standards for structural firefighting. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance.

Nomex aramid is heavier than PBI, yet breathable and moisture wicking. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. This is the most common PPE category for standard industrial applications.

Absorb sweat and stay cool by wearing these bandanas around your head or neck. They meet NFPA 70E and ASTM F1506 standards, so they’re safe to wear when sparks are flying. To keep you cool, they contain water-absorbing crystals. Run these bandanas under cold water for a few minutes, then the crystals will relieve heat through evaporation for up to 4 hours. They're made of a soft, breathable cotton and modacrylic blend that resists flames and protects against radiant heat.

Keep a cool head when you’re wearing a hard hat. These cooling pads attach to a hard-hat suspension with hook and loop straps.

Pads with arc-flash protection minimize burns from sudden electrical flashes. These pads meet NFPA 70E standards for protecting against electrical arc flashes. Choose a cooling pad that meets the arc rated personal protective equipment (PPE) category required by your workplace.

Pads with neck coverage give you extra protection from the sun.

Cotton pads have crystals that absorb water to relieve heat using evaporation. Soak them in cold water for 15-20 minutes to keep you cool for 4 hours.

Protect your face from low-level arc flashes when a full hood is not necessary. These shields meet NFPA 70E standards for protection against electrical arc flashes for personal protective equipment (PPE) category 2. Choose shields that meet the arc rated PPE category required by your workplace.

The shields meet ANSI/ISEA Z87.1 basic impact standards when worn with safety glasses or goggles. The lens on these shields flips up, so you can keep your hard hat on during breaks from electrical work. All hard hats have a ratchet suspension that adjusts with an easy-turn knob.

Shields with a green lens have a light tint that absorbs visible light and blocks glare. They let through 55% of visible light. While the green tint reduces glare, it also distorts colors, which may limit your ability to distinguish them.

Shields with a bronze or gray lens allow all wavelengths of visible light to pass through without distorting colors. They’re ideal for electrical workers who work with colored wires or electrical tape.

Shields with a chin guard protect your face from below. Those with side guards extend protection on the sides.