Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re intrinsically safe, meaning they cannot ignite an explosion. They’re also rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Ideal for close-up tasks and inspection work, their flood beam creates an even spread of light. Use the momentary light setting when you need light for brief periods—the light only turns on when you hold down the button. All have a nonslip grip so you don’t drop them.

These penlights have been tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP04-rated penlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity.

IP07-rated penlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re intrinsically safe for a broader range of hazardous locations than IP04-rated penlights. Use them in areas with ignitable concentrations of combustible dust, fibers, and other particles.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They’re rated for use in environments where ignitable concentrations of flammable or combustible gases, vapors, and liquids are present. They're intrinsically safe for NEC Class I, Division I Groups A, B, C, and D hazardous locations. This means they won't ignite an explosion. With long-lasting, built-in LEDs, they’re more efficient and generate less heat than flashlights with other light technologies. These flashlights cast a spot beam that is bright at the center for long-distance illumination.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. These flashlights are rated for use in environments where hazardous material is present. They’re also rated IP04 to withstand liquid splashed from all angles. With long-lasting, built-in LEDs, these flashlights are more efficient and generate less heat than flashlights with other light technologies. They cast a uniform beam that is especially good for close-up tasks and inspection work. Use the mounting magnet, clip, or retractable hook when you need to keep your hands free for work.

Rechargeable flashlight comes with a 120-volt AC charger that includes a 12-volt DC charging cord. This flashlight cannot be sold to Canada due to local energy efficiency regulations.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Shine light into hard-to-reach spaces in extreme environments like oil refineries or chemical plants. These flashlights are intrinsically safe, so they won’t spark. They meet NEC standards to reduce the risk of explosions. Make sure they match the hazardous environmental rating of your facility—they’re rated NEC Class I, Division I Groups A, B, C, and D. They’re also rated IP04, so they’ll seal out humidity and liquid from all angles.

Shine them continuously or use the momentary light setting to shine the light only while holding down the button. You’ll keep a firm grip on these lights thanks to their knurled texture.

Flashlights that meet ANSI/Plato FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Light up work without risking an explosion. NEC rated, these headlamps are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Swap the elastic strap with the included rubber strap to wear them around a hard hat—no clips required. To attach them to a welding helmet, use the included snap-together fastener. IP rated, you can drop them in water and they’ll still work. These headlamps are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Intrinsically safe headlamps cannot cause an explosion, so they're a better choice where hazardous material is present in normal operating conditions.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers. Intrinsically safe, they’re designed not to create enough heat or sparks to trigger an explosion.

They’re durable enough to fall from 6 ft. and still work. The polycarbonate lens resists impact, and the sturdy steel body has rubber cushioning on the edges. Rated IP67, they’re completely dust tight and can be submerged in water and still work. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Set these cordless lights up on the included tripod or mount them using the hook on the back or the magnet on the base. You can set these lights up quickly and move them elsewhere at a moment’s notice. The hook makes it easy to carry them around your jobsite and the carrying case fits both the light and the tripod.