Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high. They are ETL and C-ETL listed for Class I Division 2 Groups A, B, C, and D, Class II Divisions 1 and 2, Groups E, F, and G, and Class III Divisions 1 and 2 for use in environments where ignitable concentrations of acetylene, hydrogen, ethylene, and propane occur infrequently, such as in the case of an accidental spill or failure of a ventilation system. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a neutral light appearance, which creates a balanced environment for general work areas. These lights produce a wide beam of uniform light. Lights can be hardwired to operate on any of the voltages listed. Thread onto 3/4 NPT conduit to suspend lights from the ceiling.

Safely light up chemical processing plants, mining operations, and other large areas where combustible gases and dust are present. These lights have an explosion-proof housing that contains sparks and flames, so they won’t react to nearby hazards. With a T4 classification, their surface temperature stays below 275° F to avoid igniting flammable substances. Because they’re totally sealed, they also work well in wet, dusty, and corrosive environments—they’re IP and NEMA rated, and UL marine listed.

Mount them to your ceiling or other surface with the included adjustable bracket. The bracket pivots, so you can aim the light where needed. To suspend them from your ceiling, combine a pendant mount and junction box (sold separately).

Upgrade your existing hazardous location bay lights to energy-efficient LEDs. Choose a light that matches the model already in place—they’ll fit into your existing hood and connect to the wires already in your conduit. Safe to use in areas with combustible concentrations of gases, vapors, dust, and fibers, these lights are rated NEC Class I, II, and III.

These lights even stand up in wet and outdoor locations. Rated IP66 and IP67, they withstand washdowns and submersion in water. They’re also dust tight. For resisting salt water and other corrosive liquids, they’re UL marine listed and NEMA 4X rated. They’ll keep shining in extreme temperatures, from -40° F to 145° F.

Style A have mounting holes that align perfectly with Crouse-Hinds mounting hoods—no mounting adapter required.

Style B and C require an adapter (sold separately) to fit into Crouse-Hinds, Killark, and Mercmaster mounting hoods. Style B are rated IK08 for impact resistance against accidental bumps.