NPT Heat Sinks | McMaster-Carr

Filter by

For Use With

System of Measurement

Pipe Size

Tube Material

Cooling Capacity

Less than 10,000 BTU/hr

10,000 BTU/hr to 19,999 BTU/hr

20,000 BTU/hr to 29,999 BTU/hr

30,000 BTU/hr to 99,999 BTU/hr

Voltage

Maximum Pressure

Material

Compressed Non-Asbestos Synthetic Fiber

Shell Material

Overall Width

Flow Capacity

Thread Type

UN/UNF (SAE Straight)

Maximum Temperature

Plate Length

Overall Height

Plate Material

Connects To

Maximum Flow Rate

Heat Sink Material

Number of Passes

Overall Length

RoHS

Compliant with Exemptions

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Forward

How can we improve?

97 Products

Heat Sinks with Internal Pump for Water


	5-15

To provide a more consistent flow of cooled water than other heat sinks for water, these have a built-in pump and reservoir. The internal fan-cooled heat exchanger dissipates heat. Btu/hr. cooling capacity is based on water with an initial temperature difference of 77° F.

					Overall
	Cooling Cap., BTU/hr	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.	Heat Sink Material	Max. Pressure, psi	Max. Flow Rate, gpm	Max. Temp., ° F	Voltage (Electrical Phase)	Current, amp	NEMA Type	Cord Lg., ft.	Fitting Connection		Each
For Water and Noncorrosive Liquids



		12,000	1/2	NPT	Female	24"	15"	15"	Copper	60	1.8	130	120V AC (Single)	5.8	5-15	8	Threaded	35205K16	000000000

Heat Sinks for Oil

Dozens of fins and coolant tubes quickly dissipate excess heat. Also known as oil coolers, these heat sinks cool hydraulic fluid and lubricating oil in cylinders and compressors. Cooling and flow capacities are based on 50 SSU oil, 1,000 feet per minute of air, a 50° F initial temperature difference, and a 10 psi pressure drop.

Bypass—Heat sinks with a bypass prevent damage to the cooling fins by diverting pressurized oil. They’re often used in machines that are started up while cold. Once the oil heats up and the pressure drops, flow through the cooling tubes resumes.

					Overall
	Cooling Cap., BTU/hr	Pipe Size	Thread Type	Gender	Ht.	Wd.	Dp.	Heat Sink Material	Max. Pressure, psi	Max. Flow Rate, gpm	Max. Temp., ° F	Fitting Connection	No. of Mounting Kits Req.		Each
Copper Tube—For Oil



		3,300	1/2	NPT	Female	4 1/2"	15"	1 1/2"	Aluminum	300	7	350	Threaded	2	3525K11	0000000


		6,100	1/2	NPT	Female	6 1/2"	18"	1 1/2"	Aluminum	300	9	350	Threaded	4	3525K21	000000
		8,100	1/2	NPT	Female	6 1/2"	24"	1 1/2"	Aluminum	300	7	350	Threaded	4	3525K12	000000
		9,600	1/2	NPT	Female	8 1/2"	21"	1 1/2"	Aluminum	300	11	350	Threaded	4	3525K13	000000
		11,800	3/4	NPT	Female	12 3/4"	18"	1 1/2"	Aluminum	300	19	350	Threaded	4	3525K14	000000
		24,000	3/4	NPT	Female	18 3/4"	24"	1 1/2"	Aluminum	300	22	350	Threaded	6	3525K25	000000
		31,000	1	NPT	Female	25"	24"	1 1/2"	Aluminum	300	28	350	Threaded	8	3525K26	000000
		49,000	1	NPT	Female	31"	30"	1 1/2"	Aluminum	300	30	350	Threaded	8	3525K27	000000
		57,000	1 1/4	NPT	Female	37 7/16"	30"	1 1/2"	Aluminum	300	36	350	Threaded	8	3525K28	00000000


		Copper Tube with Bypass—For Oil



				3,400	1/2	NPT	Female	4 1/2"	15"	1 1/2"	Aluminum	300	7	350	Threaded	2	3525K101	000000


				6,300	1/2	NPT	Female	6 1/2"	18 1/4"	1 1/2"	Aluminum	300	9	350	Threaded	4	3525K102	000000
				10,000	1/2	NPT	Female	8 1/2"	21"	1 1/2"	Aluminum	300	11	350	Threaded	4	3525K103	000000
				12,000	3/4	NPT	Female	12 3/4"	18"	1 1/2"	Aluminum	300	9	350	Threaded	4	3525K104	000000

Heat Sink Mounts

Includes		Each
Two Carriage Bolts, Two Flat Washers, Two Lock Washers, Two Nuts, Two Rubber Blocks	3525K41	000000

Cold Plates


316 Stainless Steel Fitting, 4 Passes	316 Stainless Steel Fitting, 6 Passes

Connect these plates to cold liquid lines in process chillers and liquid-to-air cooling systems to cool equipment through direct contact. All have tubes that pass through a thermally conductive aluminum plate. Drill or tap the plate for mounting.

316 Stainless Steel Tube—Cold plates with 316 stainless steel tubes can stand up to corrosive liquid and deionized water.

316 Stainless Steel Fitting—Those with 316 stainless steel fittings let you connect to your system without having to weld or attach your own fittings.

	Plate
	Lg.	Wd.	Thk.	Material	Tube OD	Pipe Size	Thread Type	Max. Pressure, psi	Max. Temp., ° F		Each
316 Stainless Steel Tubes and 316 Stainless Steel Fittings







				4 Passes

				6"	3 1/2"	1/2"	Aluminum	3/8"	1/4	NPT	1,000	450	35035K121	0000000


				12"	3 1/2"	1/2"	Aluminum	3/8"	1/4	NPT	1,000	450	35035K122	000000




						6 Passes

						6"	5 1/2"	1/2"	Aluminum	3/8"	1/4	NPT	1,000	450	35035K123	000000


						12"	5 1/2"	1/2"	Aluminum	3/8"	1/4	NPT	1,000	450	35035K124	000000

High-Efficiency Heat Exchangers


2 Mounting Holes	4 Mounting Holes	2 Mounting Studs	With Four Mounting Studs

Stacked, corrugated plates maximize contact with liquid or steam flowing through these brazed plate heat exchangers for faster heat transfer than shell and tube heat exchangers. Plates are brazed in a vacuum furnace to ensure 100% sealed construction.

ASME BPVC.VIII.1 Certified Heat Exchangers—ASME BPVC VIII.1 copper-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling 100 SSU oil to 125° F using 85° F water. They meet the ASME Boiler and Pressure Vessel Code (BPVC) for construction of pressure vessels.

Nickel-Brazed 316 Stainless Steel Plate—Nickel-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling oil from 140° to 120° F using 70° F water.

Copper-Brazed 316 Stainless Steel Plate—Copper-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling water from 120° to 100° F using 70° F water.

									Overall			Mounting Hole		Mounting Stud
	Heating/Cooling Cap., BTU/hr	Surface Area, ft²	Temp. Range, ° F	Pipe Size	Thread Type	Gender	Flow Cap., gpm	Max. Pressure, psi	Ht.	Wd.	Dp.	No. of	Dia.	No. of	Thread Size	Lg.		Each
Heat Exchangers







				Nickel-Brazed 316 Stainless Steel Plate

				16,000	3.1	-320 to 390	1	NPT	Male	4	360	13 3/16"	4 7/8"	2 3/16"	—	—	4	M10	13/16"	3253K31	0000000


				37,000	6.8	-320 to 390	1	NPT	Male	9	360	13 3/16"	4 7/8"	3 1/16"	—	—	4	M10	13/16"	3253K32	00000000
				56,000	10.6	-320 to 390	1	NPT	Male	13	360	13 3/16"	4 7/8"	4"	—	—	4	M10	13/16"	3253K33	00000000
				74,000	14.3	-320 to 390	1	NPT	Male	18	360	13 3/16"	4 7/8"	4 7/8"	—	—	4	M10	13/16"	3253K34	00000000
				120,000	40.7	-320 to 390	2	NPT	Male	30	390	20 15/16"	10 11/16"	4 1/16"	—	—	4	M12	1 3/16"	3253K35	00000000


				UL Listed Heat Exchangers







								Copper-Brazed 316 Stainless Steel Plate

								69,000	2.2	-320 to 350	3/4	NPT	Male	7	450	9 1/8"	3 1/2"	2 5/8"	—	—	2	M8	20 mm	35115K61	000000


								112,000	3	-320 to 350	1	NPT	Male	8	450	13 3/16"	5"	1 1/4"	—	—	4	M10	20 mm	35115K62	000000
								270,000	6.8	-320 to 350	1	NPT	Male	19	450	13 3/16"	5"	2"	—	—	4	M8	20 mm	35115K63	000000
								574,000	14.3	-320 to 350	1	NPT	Male	40	450	13 3/16"	5"	4"	—	—	4	M10	20 mm	35115K64	000000
								780,000	21.9	-320 to 350	1 1/4	NPT	Male	53	450	13 3/16"	5"	5 3/4"	—	—	4	M8	20 mm	35115K65	00000000
								998,000	36.8	-320 to 350	2	NPT	Male	105	300	20 5/16"	9 13/16"	3.06"	—	—	4	1/2"-13	1 1/2"	35115K66	00000000
								1,710,000	68.3	-320 to 390	2	NPT	Male	120	450	20 15/16"	10 11/16"	4 15/16"	—	—	4	M12	30 mm	35115K77	00000000


								ASME BPVC.VIII.1 Certified Heat Exchangers







												Copper-Brazed 316 Stainless Steel Plate

												5,000	4.8	-310 to 450	3/4	NPT	Male	27	435	8 7/16"	3 3/16"	4 7/16"	2	9/32"	—	—	—	8546T11	000000


												12,000	7.9	-310 to 450	1	NPT	Male	29	435	12 3/16"	4 3/8"	4 1/4"	2	13/32"	—	—	—	8546T12	000000
												17,000	10.7	-310 to 450	1	NPT	Male	37	435	12 3/16"	4 3/8"	5 1/4"	2	13/32"	—	—	—	8546T13	000000
												50,000	15.6	-310 to 450	1	NPT	Male	22	435	20 11/16"	4 3/8"	4 1/4"	2	13/32"	—	—	—	8546T14	000000
												75,000	26.8	-310 to 450	1	NPT	Male	34	435	20 11/16"	4 3/8"	6 3/16"	2	13/32"	—	—	—	8546T15	00000000
												125,000	29.7	-310 to 450	2	NPT	Male	57	435	24 5/16"	7 1/2"	5 3/4"	4	1/2"	—	—	—	8546T16	00000000
												380,000	82.8	-310 to 450	2	NPT	Male	141	435	24 5/16"	7 1/2"	11 1/2"	4	1/2"	—	—	—	8546T17	00000000

Heat Exchangers

Also known as shell and tube heat exchangers, these transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes. They’re commonly used in refrigeration and engine cooling systems.

NPT Female Threaded Shell-Side and Tube-Side Connections

Image of Product. Front orientation. Heat Exchangers. Heat Exchangers, Threaded.

316 Stainless Steel Shell—Heat exchangers with a 316 stainless steel shell are the most corrosion resistant.

Baffled Tubes—Heat exchangers with baffled tubes direct liquid to make four passes through the tubes for more efficient heat transfer than other heat exchangers.

316 Stainless Steel Tube—Heat exchangers with 316 stainless steel tubes are the most corrosion resistant.

Heating/Cooling Capacity—Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference.

				Temp., ° F		Shell-Side			Tube Side			Overall
	Heating/Cooling Cap., BTU/hr	Surface Area, ft²	No. of Passes	Min.	Max.	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Lg.	Head Dia.		Each
Brass Shell and Baffled Copper Tube



		130,000	2.4	4	-20	300	1	24	300	3/4	12	150	10 7/8"	4 3/16"	34965K52	000000000


		195,000	4.3	4	-20	300	1	24	300	3/4	12	150	16 7/8"	4 3/16"	34965K53	00000000
		280,000	7.4	4	-20	300	1	24	300	3/4	12	150	26 7/8"	4 3/16"	34965K54	00000000
		350,000	9.1	4	-20	300	1 1/2	60	300	1	30	150	18 1/8"	6 1/2"	34965K55	00000000
		560,000	15.7	4	-20	300	1 1/2	60	300	1	30	150	28 1/8"	6 1/2"	34965K56	00000000
		890,000	23	4	-20	300	2	73	300	1 1/2	57	150	29"	7 1/2"	34965K57	00000000
		1,115,000	34	4	-20	300	2	73	300	1 1/2	57	150	41"	7 1/2"	34965K58	00000000
		1,585,000	41	4	-20	300	3	140	300	2	104	150	30 3/8"	9 3/4"	34965K59	00000000
		2,000,000	62	4	-20	300	3	140	300	2	105	150	42 3/8"	9 3/4"	34965K61	00000000


		Steel Shell and Baffled Copper Tube



				195,000	4.3	4	-20	300	1	22	300	3/4	12	150	17"	4 1/2"	3222K53	00000000


				280,000	7.4	4	-20	300	1	30	300	3/4	12	150	27"	4 1/2"	3222K54	00000000
				350,000	9.1	4	-20	300	1 1/2	32	300	1	30	150	18 11/16"	6 3/4"	3222K55	00000000
				560,000	15.7	4	-20	300	1 1/2	43	300	1	30	150	28 11/16"	6 3/4"	3222K56	00000000
				890,000	23	4	-20	300	2	51	300	1 1/2	57	150	29"	7 3/4"	3222K57	00000000
				1,115,000	34	4	-20	300	2	103	300	1 1/2	57	150	41"	7 3/4"	3222K58	00000000
				1,585,000	41	4	-20	300	3	103	300	2	104	150	30 1/2"	10 1/2"	3222K59	00000000
				2,000,000	62	4	-20	300	3	103	300	2	105	150	42 1/2"	10 1/2"	3222K61	00000000


				Steel Shell and Copper Tube



						Not Rated	15	2	Not Rated	400	2 1/2 (Inlet); 1 1/4 (Outlet)	38	100	1 1/4	38	100	28 5/8"	6"	3586K31	00000000


						316 Stainless Steel Shell and Baffled 316 Stainless Steel Tube



								130,000	2.4	4	-20	450	1	32	225	3/4	12	150	10 3/8"	4 3/16"	35185K42	00000000


								195,000	4.3	4	-20	450	1	32	225	3/4	12	150	16 3/8"	4 3/16"	35185K43	00000000
								280,000	7.4	4	-20	450	1	32	225	3/4	12	150	26 3/8"	4 3/16"	35185K44	00000000
								350,000	9.1	4	-20	450	1 1/2	76	225	1	30	150	17 13/16"	6 1/2"	35185K45	00000000
								560,000	15.7	4	-20	450	1 1/2	76	225	1	30	150	27 13/16"	6 1/2"	35185K46	00000000
								890,000	23	4	-20	450	2	126	225	1 1/2	57	150	28 1/8"	7 1/2"	35185K47	00000000
								1,115,000	34	4	-20	450	2	126	225	1 1/2	57	150	40 1/8"	7 1/2"	35185K48	00000000
								1,585,000	41	4	-20	450	3	220	225	2	104	150	28"	9 3/4"	35185K49	00000000
								2,000,000	62	4	-20	450	3	220	225	2	105	150	40"	9 3/4"	35185K51	00000000

NPT Female Threaded Shell-Side and Tube-Side Connections—ASME BPVC.VIII.1 Certified

ASME BPVC VIII.1 heat exchangers meet the ASME Boiler and Pressure Vessel Code (BPVC) for construction of pressure vessels.

Heating/Cooling Capacity—Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference.

				Temp., ° F		Shell-Side			Tube Side			Overall
	Heating/Cooling Cap., BTU/hr	Surface Area, ft²	No. of Passes	Min.	Max.	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Lg.	Head Dia.		Each
Steel Shell and Copper Tube



		150,000	4.5	2	-20	375	2 (Inlet); 1 (Outlet)	44	150	1 1/2	44	150	28 1/2"	7 1/4"	3586K41	000000000


		420,000	6.8	2	-20	375	2 (Inlet); 1 (Outlet)	44	150	1 1/2	44	150	40 1/2"	7 1/4"	3586K42	00000000
		720,000	9.2	2	-20	375	3 (Inlet); 1 (Outlet)	44	150	1 1/2	44	150	52 1/2"	7 1/4"	3586K43	00000000
		1,350,000	17.4	2	-20	375	2 1/2 (Inlet); 1 (Outlet)	175	150	2	175	150	53 1/4"	10 1/2"	3586K44	00000000

NPT Female Flanged Shell-Side Inlet Connections and Threaded Tube-Side Connections

Image of Product. Front orientation. Heat Exchangers. Heat Exchangers, Flanged.

Heating/Cooling Capacity—Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference.

				Temp.		Shell-Side			Tube Side			Overall
	Heating/Cooling Cap.	Surface Area, ft²	No. of Passes	Min.	Max., ° F	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Lg.	Head Dia.		Each
Steel Shell and Copper Tube



		Not Rated	30.2	2	Not Rated	400	4 (Inlet); 1 1/2 (Outlet)	100	100	2	100	100	39 3/4"	8 1/8"	3586K33	000000000


		Not Rated	38.8	2	Not Rated	400	4 (Inlet); 1 1/2 (Outlet)	100	100	2	100	100	51 3/4"	8 1/8"	3586K34	00000000
		Not Rated	72.4	2	Not Rated	400	6 (Inlet); 2 (Outlet)	180	100	2 1/2	180	100	53"	10 1/8"	3586K35	00000000

Open-Tank Heat Exchangers

Place these heat exchangers in open tanks to heat or cool their contents by transferring heat from water or steam that flows through passageways in the panel. Pipe connections are located above the fluid level, so the heat exchangers can be removed without emptying the tank.

				Temp.			Inlet			Outlet
	Surface Area, ft²	Flow Cap., gpm	Max. Pressure, psi	Min.	Max.	Heat Exchanger Type	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Overall Ht.	Wd.	Panel Ht.		Each
316 Stainless Steel



		3.8	9	100	Not Rated	Not Rated	Coil Panel	3/4	NPT	Male	3/4	NPT	Male	24"	24"	12"	3603K814	0000000


		3.8	24	100	Not Rated	Not Rated	Coil Panel	1	NPT	Male	3/4	NPT	Male	24"	24"	12"	3603K815	000000
		4.8	9	100	Not Rated	Not Rated	Coil Panel	3/4	NPT	Male	3/4	NPT	Male	24"	30"	12"	3603K817	00000000
		5.6	24	100	Not Rated	Not Rated	Coil Panel	1	NPT	Male	3/4	NPT	Male	30"	24"	18"	3603K827	00000000
		5.8	9	100	Not Rated	Not Rated	Coil Panel	3/4	NPT	Male	3/4	NPT	Male	24"	36"	12"	3603K818	00000000
		5.8	24	100	Not Rated	Not Rated	Coil Panel	1	NPT	Male	3/4	NPT	Male	24"	36"	12"	3603K823	00000000
		7.5	24	100	Not Rated	Not Rated	Coil Panel	1	NPT	Male	3/4	NPT	Male	36"	24"	24"	3603K829	00000000
		9.6	9	100	Not Rated	Not Rated	Coil Panel	3/4	NPT	Male	3/4	NPT	Male	36"	30"	24"	3603K832	00000000
		9.6	24	100	Not Rated	Not Rated	Coil Panel	1	NPT	Male	3/4	NPT	Male	36"	30"	24"	3603K84	00000000
		11.7	9	100	Not Rated	Not Rated	Coil Panel	3/4	NPT	Male	3/4	NPT	Male	36"	36"	24"	3603K846	00000000
		11.7	24	100	Not Rated	Not Rated	Coil Panel	1	NPT	Male	3/4	NPT	Male	36"	36"	24"	3603K851	00000000


		15.9	9	100	Not Rated	Not Rated	Coil Panel	3/4	NPT	Male	3/4	NPT	Male	36"	48"	24"	3603K856	00000000
		15.9	24	100	Not Rated	Not Rated	Coil Panel	1	NPT	Male	3/4	NPT	Male	36"	48"	24"	3603K861	00000000
		20.1	41	100	Not Rated	Not Rated	Coil Panel	1 1/2	NPT	Male	3/4	NPT	Male	36"	60"	24"	3603K879	00000000
		24.3	41	100	Not Rated	Not Rated	Coil Panel	1 1/2	NPT	Male	3/4	NPT	Male	36"	72"	24"	3603K891	00000000

Heat Exchangers for Sampling

Often used to monitor boiler water quality without shutting down the system, these heat exchangers cool hot liquid samples to safe temperatures for testing. Sample liquid flows through the tubes, and cold water from an external water supply flows around the tubes to cool the liquid in the tubes. Cooled sample water then flows out of the heat exchanger for analysis.

NPT Female Threaded Shell-Side and Tube-Side Connections


1.3 ft² Surface Area	3.8 ft² Surface Area

316 Stainless Steel Tube—316 stainless steel tubes have the best corrosion resistance.

1.3 ft² Surface Area—Heat exchangers with 1.3 ft² surface area are often used for sampling liquid from a boiler.

3.8 ft² Surface Area—Heat exchangers with 3.8 ft² surface area are good for sampling steam from a boiler or for continuously cooling sample water.

			Shell-Side				Tube Side				Overall
	Heating/Cooling Cap.	Surface Area, ft²	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Max. Temp., ° F	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Max. Temp., ° F	Lg.	Head Dia.		Each
Steel Shell and Copper Tube



		Not Rated	1.3	1/4	2	150	450	1/4	4	300	400	17 1/4"	3 1/2"	3613K31	0000000


		Steel Shell and 316 Stainless Steel Tube



				Not Rated	1.3	1/4	2	150	450	1/4	4	3,000	750	17 1/4"	3 1/2"	3613K41	000000


				Not Rated	3.8	3/8	2	150	450	1/4	4	4,900	750	32 5/8"	—	3613K61	00000000

NPT Female Threaded Shell-Side and Male Threaded Tube-Side Connections

1.64 ft²

Surface

Area

304 Stainless Steel Tube—304 stainless steel tubes are more corrosion resistant than copper tubes.

1.64 ft² Surface Area—Heat exchangers with 1.64 ft² surface area are often used for sampling liquid from a boiler.

		Shell-Side				Tube Side				Overall
	Surface Area, ft²	Pipe Size	Flow Cap.	Max. Pressure, psi	Max. Temp., ° F	Pipe Size	Flow Cap.	Max. Pressure, psi	Max. Temp., ° F	Lg.	Head Dia.		Each
Steel Shell and Copper Tube



		1.64	1/2	Not Rated	250	650	1/4	Not Rated	300	400	19"	7"	3613K26	0000000


		Steel Shell and 304 Stainless Steel Tube



				1.64	1/2	Not Rated	250	650	1/4	Not Rated	900	750	19"	7"	3613K22	000000

High-Pressure Heat Exchangers

With more than three times the pressure rating of standard heat exchangers, these are often used for high-pressure condensing, evaporating, heating, and cooling. Also known as shell and tube heat exchangers, they transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes.

NPT Female Threaded Shell-Side and Tube-Side Connections

Image of Product. Front orientation. Heat Exchangers. High-Pressure Heat Exchangers.

316 Stainless Steel Shell—Shell is 316 stainless steel for excellent corrosion resistance.

316 Stainless Steel Tube—Tubes are 316 stainless steel for excellent corrosion resistance.

Heating/Cooling Capacity—Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference.

				Temp., ° F		Shell-Side			Tube Side			Overall
	Heating/Cooling Cap., BTU/hr	Surface Area, ft²	Max. Pressure for Steam, psi	Min.	Max.	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Pipe Size	Flow Cap., gpm	Max. Pressure, psi	Lg.	Head Dia.		Each
316 Stainless Steel Shell and 316 Stainless Steel Tube



		59,000	0.4	125	-320	800	1/4	4.8	1,000	3/8	10.9	1,500	9 3/4"	1 1/8"	3771K14	000000000


		65,500	0.61	125	-320	800	1/4	4.4	1,000	3/8	9.3	1,500	13 3/4"	1 1/8"	3771K15	00000000
		76,500	0.58	125	-320	800	1/4	4.8	1,000	3/8	10.1	1,500	9 3/4"	1 1/8"	3771K11	00000000
		90,000	0.89	125	-320	800	1/4	4.4	1,000	3/8	8.4	1,500	13 3/4"	1 1/8"	3771K12	00000000
		98,000	1.19	125	-320	800	1/4	4.2	1,000	3/8	7.3	1,500	17 3/4"	1 1/8"	3771K13	00000000