Form these flexible heaters into any shape to mount them through brackets, collars, and holes. They are also known as tubular heaters.

With a cable that supplies the same wattage along the entire length, these heaters remain consistent regardless of the surrounding temperature. All require a temperature switch or controller to regulate heat output.

Turn the dial to control the percentage of time that these heaters cycle on, from 5% to 100%. Commonly used to thaw pipes, prevent valves from freezing, and heat beakers and flasks in labs, they're good for temporary and occasional use where rapid heating is required but precise temperature control is not.

When the ambient temperature changes, these heaters automatically adjust the heat output along the length of their cable. Also known as self-regulating heat cable, they don’t require a separate temperature switch or controller.

Keep liquid in your pipes from freezing, maintain a specific viscosity, and prevent condensation in cold areas.

For demanding applications such as hot-melt transfer pipes, these heaters have a maximum heat output of 1400° F.

Heat water through direct contact in sanitary areas such as food, cosmetic, and pharmaceutical plants.

Sized to fit drums, these heaters have a bracket to hook on the side of drums and in bung openings.

Form these heaters into any shape and install them through container walls with the attached bulkhead fittings.

These heaters install through threaded container openings or pipe couplings.

To prevent hot spots that can damage heat-sensitive materials such as adhesives, sealants, and food, these heaters warm the air around containers without touching them.

These ETL-listed heaters keep containers warm in areas where hazardous material is present. Also known as heat blankets, they surround drums and totes to heat them up quickly.

Also known as heat blankets, these heaters completely surround containers for fast heating and increased heat retention in unheated and drafty areas.

Nonstandard-size containers are no problem—use the hook-and-loop closure to adjust these heaters to fit a range of diameters.

For greater cooling capacity and higher flow rates than other heat sinks for oil, these have a large fan.

A fan cools water as it moves through the tubes.

Create a circle of radiant heat to install heat-shrink tubing and bend plastic tubing. Use these wands in applications where blowing air is not practical, such as in clean rooms and other controlled environments.