Selecting an Immersion Heater
More
Drop-In Immersion Heaters for Water
Often used for temporary heating in sinks and pails, these heaters have a circular base that sits at the bottom of containers to quickly and efficiently heat liquid through direct contact. Remove them from the container after heating its contents. The heating element is Incoloy for excellent corrosion resistance.
Note: Immerse the heating element in liquid up to at least the minimum coverage level to prevent heater failure.
Floating Immersion Heaters for Water
Often used for freeze protection in outdoor containers, these heaters float on the water’s surface and automatically turn on when the water temperature drops below 45° F and turn off when it rises above 65° F. They are for use in metal containers. All have an Incoloy heating element for excellent corrosion resistance.
Clip-on heater guards (sold separately) prevent the heating element from contacting the sides of the container, allowing floating heaters be used in plastic containers.
Bolt-On Immersion Heaters with Overheat Protection for Chemical Solutions
A replaceable fuse cuts off power if the heating element reaches 190° F to prevent burnout and premature failure. Bolt the flange to the top of containers. Heaters make direct liquid contact for fast and efficient heating. The heating element is 304 stainless steel for good resistance to harsh chemicals.
Heaters with an adjustable thermostat automatically turn on when the temperature drops below the set temperature and off when it rises above the set temperature. Adjust the set temperature with the digital keypad.
Optional 329° F fuse (sold separately) cuts off power if the heating element reaches 329° F.
Note: Immerse the heating element in liquid up to at least the minimum coverage level to prevent heater failure.
Heating Element | Flange Bolt Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wattage, W | Watt Density, W/sq. in. | Current, A  | Lg. | Wd. | No. of | Min. Coverage | NEMA Style | Dia. | No. of | For Use With | Each | |
With Adjustable Thermostat (32° to 302° F)—304 Stainless Steel Heating Element and 304 Stainless Steel Body | ||||||||||||
120V AC, Single Phase | ||||||||||||
| 500 | 35 | 4.2 | 11" | 1 1/4" | 1 | 9" | 5-15 | 1/2" | 2 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Ethylene Glycol Hydraulic Oil Machine Oil Motor Oil Nitric Acid (0-3%) Nitric Acid (3-6%) Phosphoric Acid (0-3%) Phosphoric Acid (3-6%) Propylene Glycol Salt Water Soap Solutions Sodium Hydroxide (0-3%) Sodium Hydroxide (3-6%) Water | 0000000 | 0000000 |
| 1,000 | 35 | 8.3 | 11" | 1 1/4" | 1 | 9" | 5-15 | 1/2" | 2 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Ethylene Glycol Hydraulic Oil Machine Oil Motor Oil Nitric Acid (0-3%) Nitric Acid (3-6%) Phosphoric Acid (0-3%) Phosphoric Acid (3-6%) Propylene Glycol Salt Water Soap Solutions Sodium Hydroxide (0-3%) Sodium Hydroxide (3-6%) Water | 0000000 | 000000 |
| 1,500 | 17 | 12.5 | 28" | 2" | 1 | 12" | 5-15 | 1/2" | 2 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Ethylene Glycol Hydraulic Oil Machine Oil Motor Oil Nitric Acid (0-3%) Nitric Acid (3-6%) Phosphoric Acid (0-3%) Phosphoric Acid (3-6%) Propylene Glycol Salt Water Soap Solutions Sodium Hydroxide (0-3%) Sodium Hydroxide (3-6%) Water | 0000000 | 000000 |
| 1,500 | 35 | 12.5 | 17" | 2" | 1 | 12" | 5-15 | 1/2" | 2 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Ethylene Glycol Hydraulic Oil Machine Oil Motor Oil Nitric Acid (0-3%) Nitric Acid (3-6%) Phosphoric Acid (0-3%) Phosphoric Acid (3-6%) Propylene Glycol Salt Water Soap Solutions Sodium Hydroxide (0-3%) Sodium Hydroxide (3-6%) Water | 0000000 | 000000 |
Hanging Immersion Heaters for Chemical Solutions
Hook these heaters on the side of small drums and pails to quickly and efficiently heat liquid through direct contact. All are for use in metal containers; they should not be used in plastic containers. An adjustable thermostat automatically turns the heater on when the temperature drops below the set temperature and off when it rises above the set temperature. Adjust the set temperature with the dial. The heating element is 316 stainless steel for excellent resistance to harsh chemicals.
Note: Immerse the heating element in liquid up to at least the minimum coverage level to prevent heater failure.
Heating Element | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Container Cap., gal. | Wattage, W | Watt Density, W/sq. in. | Voltage | Electrical Phase | Current, A | Dia. | Wd. | Min. Coverage | Overall Lg. | Temperature Control Method | NEMA Style | Cord Lg., ft. | For Use With | Each | |
With Adjustable Thermostat (70° to 212° F) | |||||||||||||||
6" Lg. 316 Stainless Steel Heating Element | |||||||||||||||
| 1 to 5 | 500 | 25 | 120V AC | Single | 4.3 | __ | 1 3/8" | 4 1/2" | 9 3/4" | Dial | 5-15 | 6 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Ethylene Glycol Motor Oil Water | 0000000 | 0000000 |
| 1 to 5 | 1,100 | 56 | 120V AC | Single | 9.6 | __ | 1 3/8" | 4 1/2" | 9 3/4" | Dial | 5-15 | 6 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Motor Oil Water | 0000000 | 000000 |
20" Lg. 316 Stainless Steel Heating Element | |||||||||||||||
| 5 to 10 | 500 | 12 | 120V AC | Single | 4.3 | __ | 1 3/8" | 18 1/2" | 23 1/2" | Dial | 5-15 | 6 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Ethylene Glycol Motor Oil Nitric Acid (0-3%) Nitric Acid (3-6%) Phosphoric Acid (0-3%) Phosphoric Acid (3-6%) Sodium Hydroxide (0-3%) Sodium Hydroxide (3-6%) Water | 0000000 | 000000 |
| 5 to 10 | 1,100 | 25 | 120V AC | Single | 9.6 | __ | 1 3/8" | 18 1/2" | 23 1/2" | Dial | 5-15 | 6 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Ethylene Glycol Motor Oil Nitric Acid (0-3%) Nitric Acid (3-6%) Phosphoric Acid (0-3%) Phosphoric Acid (3-6%) Sodium Hydroxide (0-3%) Sodium Hydroxide (3-6%) Water | 0000000 | 000000 |
With Adjustable Thermostat (70° to 250° F) | |||||||||||||||
14" Lg. 316 Stainless Steel Heating Element | |||||||||||||||
| 5 to 10 | 1,500 | 19 | 120V AC | Single | 13 | 13" | __ | 5" | 14 1/2" | Dial | 5-15 | 6 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Ethylene Glycol Motor Oil Phosphoric Acid (0-3%) Phosphoric Acid (3-6%) Water | 00000000 | 000000 |
| 5 to 10 | 1,500 | 23 | 120V AC | Single | 13 | 10 1/2" | __ | 5" | 14 1/2" | Dial | 5-15 | 6 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Ethylene Glycol Motor Oil Water | 00000000 | 000000 |
| 5 to 10 | 1,500 | 34 | 120V AC | Single | 13 | 7" | __ | 5" | 14 1/2" | Dial | 5-15 | 6 | Ammonium Hydroxide (0-3%) Ammonium Hydroxide (3-6%) Deionized Water Motor Oil Water | 00000000 | 000000 |
Hanging Immersion Heaters for Coolant
Use the attached bracket to hook these heaters on the side of drums and in bung openings. They quickly and efficiently heat liquid through direct contact. With a lower watt density than heaters for water or chemicals, these heaters can heat coolant without creating hot spots or damaging the heating element. An adjustable thermostat automatically turns the heater on when the temperature drops below the set temperature and off when it rises above the set temperature. Adjust the set temperature with the dial. Heaters are for use in metal containers; they should not be used in plastic containers.
Hang-on heaters have a bracket to hook on the side of containers.
Stainless steel heating elements have good corrosion resistance.
Note: Immerse the heating element in liquid up to at least the minimum coverage level to prevent heater failure.
Heating Element | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Container Cap., gal. | Wattage, W | Watt Density, W/sq. in. | Voltage | Electrical Phase | Current, A | Lg. | Wd. | Min. Coverage | Temp. Control Range, °F | Electrical Connection Type | NEMA Style | Cord Lg., ft. | For Use With | Each | |
316 Stainless Steel Heating Element | |||||||||||||||
| 8 to 20 | 1,000 | 14 | 120V AC | Single | 8.3 | 26" | 13" | 4 1/2" | 60° to 250° | Plug | 5-15 | 6 | Ethylene Glycol, Water | 00000000 | 0000000 |
| 8 to 20 | 1,500 | 16 | 120V AC | Single | 12.5 | 26" | 17" | 4 1/2" | 60° to 250° | Plug | 5-15 | 6 | Ethylene Glycol, Water | 00000000 | 000000 |
Flow-Through Heaters for Chemical Solutions
Also known as circulation heaters, these install directly into pipelines to quickly and efficiently heat liquid through direct contact. All are designed to heat chemical solutions at much higher watt densities than other immersion heaters without damaging the heating element. An adjustable thermostat automatically turns the heater on when the temperature drops below the set temperature and off when it rises above the set temperature. Adjust the set temperature with the dial. Heaters automatically shut off at 202° F to prevent fire and heating element burnout. The heating element is titanium for excellent resistance to harsh chemicals.
Heating Element | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wattage, W | Watt Density, W/sq. in. | Current, A | Lg. | Wd. | Temp. Control Range, °F | Pipe Size | Thread Type | Gender | Electrical Connection Type | NEMA Style | Environmental Rating | For Use With | Each | |
Titanium Heating Element with 304 Stainless Steel Body | ||||||||||||||
120V AC, Single Phase | ||||||||||||||
| 1,500 | 42 | 12.5 | 15" | 5.7" | 90° to 190° | 1 1/2 | NPT | Female | Plug | 5-15 | NEMA 1 | Ammonium Hydroxide (0-3%), Ammonium Hydroxide (3-6%), Deionized Water, Salt Water, Water | 0000000 | 0000000 |