3/4"-16 Helicoils | McMaster-Carr

Filter by

System of Measurement

Thread Direction

Helical Insert Type

Installed Length

Material

Thread Type

For Use In

For Tap Type

Military Specification

Drill Bit Size

For Insert Thread Size

3/4"-16

Export Control Classification Number (ECCN)

REACH

RoHS

DFARS Specialty Metals

Sold As

Tensile Strength

Thread Spacing

Number of Inserts Included

Profile

Narrow

Standard

For Use With

Helical Inserts

Screw-Locking Helical Inserts

Insert Tool Thread Type

Handle Style

Specifications Met

For Material Thickness

13 Products

Helical Threaded Insert Removal Tools

To remove installed helical inserts, place the tip of these tools into the insert and lightly strike the tool’s head. Then, turn the tool counterclockwise with pressure to extract the insert.

Narrow Profile—The tip of these tools has a narrower angle than standard removal tools to reduce the chance it will dig into your material’s surface when you strike the tool.

	Mfr.		Each
Standard Profile



	6-32, 6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, 1"-12, 1"-14, M4, M5, M6, M7, M8, M9, M10, M12, M13, M14, M15, M16, M18, M20, M22, M24	—	000000000	000000


	Narrow Profile



			7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 1/2"-28, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 5/8"-24, 3/4"-10, 3/4"-16, 3/4"-20, 7/8"-9, 7/8"-14, 7/8"-20, 1"-8, 1"-12, 1"-14, M12, M14, M16, M18, M20, M22, M24	Heli-Coil	000000000	00000

Helical Threaded Inserts

Pronged

Restore, reinforce, or create metal threads. The tough coils on these inserts expand once installed to anchor in a tapped hole. Also known as Heli-Coil inserts, they're often used in engine heads and machinery housings where strong connections are critical. Unlike threadlocking inserts, you can remove and reuse them without them losing their strength.

Installation requires a drill bit, a helical insert tap, and an installation tool. Easy-start installation tools compress the diameter of your insert so it fits easily into a tapped hole. These tools are the best choice for preventing misaligned or damaged threads—just make sure you have space to turn the crank.

Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.

18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.

	Inserts								Through-Hole Taps		Closed-End Hole Taps		Installation Tools		Inserts with Installation Tools
	Thread Size	Installed Lg.	Drill Bit Size	For Max. Hole Dia.	Specs. Met	Pkg. Qty.		Pkg.		Each		Each		Each	No. of Inserts Included		Each
Pronged







				18-8 Stainless Steel

				3/4"-16	0.750"	49/64"	0.766"	MS124663	1	000000000	00000	000000000	0000000	000000000	0000000	000000000	0000000	—	———	0


				3/4"-16	1.125"	49/64"	0.766"	MS124703	1	000000000	0000	000000000	000000	000000000	000000	000000000	000000	4	000000000	0000000

Extraction Tools

Remove installed helical inserts.

For Pronged Helical Inserts—Place the tip into pronged inserts and lightly strike the tool’s head. Then, turn the tool counterclockwise with pressure to extract the insert.

		Each
For Pronged Helical Inserts



	7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 1/2"-28, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 5/8"-24, 3/4"-10, 3/4"-16, 3/4"-20, 7/8"-9, 7/8"-14, 7/8"-20, 1"-8, 1"-12, 1"-14, M12, M14, M16, M18, M20, M22, M24	000000000	000000

Easy-Start Helical Threaded Insert Installation Tools

These tools compress the diameter of your insert so it fits easily into a tapped hole. They’re the best choice for preventing misaligned or damaged threads—just make sure you have space to turn the crank. Screw or slide an insert onto your tool and drive it between a quarter-turn and half-turn below the surface. Also known as prewinders.

Threaded Insert Installation Tools with Depth Stop

T-Handle


Prong Slot Drive	Threaded Drive

Ensure consistent installation across multiple inserts. Set your desired installation depth, and the stop will prevent you from driving your insert any further.

Prong Slot Drive Helical Insert Tool—Install both left- and right-hand threaded inserts with any thread pitch. However, these tools don't align the threads like threaded-drive tools, so installation may be more difficult.

Threaded Drive Helical Insert Tool—These tools align each coil of your insert perfectly with the thread pitch of your tapped hole for easy installation.

	Mfr.	Handle Style	Helical Insert Tool Drive Type	For Use With		Each
Standard (UN) Thread



	3/4"-16	—	T-Handle	Prong Slot	Helical Inserts, Screw-Locking Helical Inserts	0000000	0000000


	3/4"-16	Heli-Coil	T-Handle	Threaded	Helical Inserts, Screw-Locking Helical Inserts	000000000	000000

Other Threaded Insert Installation Tools

T-Handle

Threaded Drive Helical Insert Tool—These tools align each coil of your insert perfectly with the thread pitch of your tapped hole for easy installation.

	Mfr.	Handle Style	Helical Insert Tool Drive Type	For Use With		Each
Standard (UN) Thread



	3/4"-16	Heli-Coil	T-Handle	Threaded	Helical Inserts	000000000	000000

Helical Insert Taps

Match the size of helical inserts so they fit tightly when installed in the hole.

High-Speed Steel—These taps resist heat and wear to stay sharp.

Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.

Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.

						Drill Bit			Plug Chamfer		Bottoming Chamfer
	For Insert Size	Thread Lg.	Overall Lg.	For Insert Thread Type	No. of Flutes	Size	Decimal Size Equiv.	Shank Type		Each		Each
High-Speed Steel







				Uncoated

				3/4"-16	2"	4 15/32"	UNF	4	49/64"	0.7656"	Square	000000000	0000000	000000000	0000000

Screw-Locking Helical Threaded Inserts

Pronged

The irregularly shaped threads tightly grip screws to prevent them from loosening or backing out under vibration. Use these inserts to create or repair threads in automobile parts and other machinery that shakes and rattles. Also known as Heli-Coil inserts.

Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.

18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.

	Inserts								Through-Hole Taps		Closed-End Hole Taps		Installation Tools
	Thread Size	Installed Lg.	Drill Bit Size	For Max. Hole Dia.	Specs. Met	Pkg. Qty.		Pkg.		Each		Each		Each
Pronged







				18-8 Stainless Steel

				3/4"-16	0.750"	49/64"	0.766"	NASM21209, MS21209F1210	1	000000000	00000	000000000	0000000	000000000	0000000	000000000	0000000


				3/4"-16	1.125"	49/64"	0.766"	NASM21209, MS21209F1215	1	000000000	0000	000000000	000000	000000000	000000	000000000	000000

Helical Threaded Inserts with Installation Tools

Drill Bit, Installation Tool

and Through-Hole Tap

Quickly restore stripped threads—these inserts come with through-hole taps and installation tools.

Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.

18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.

	For Max. Hole Dia.	No. of Inserts Included	Includes		Each
Pronged







	18-8 Stainless Steel

	3/4"-16	1.125"	49/64"	0.766"	4	Drill Bit Installation Tool Through-Hole Tap	000000000	0000000

Helical Threaded Insert Installation Tools

No Handle

Install your pronged helical inserts into tapped holes. Screw an insert onto these tools and drive them a quarter to half-turn below the material’s surface.

Square Shank—These tools don’t have a handle. Attach them to a tap wrench to turn.

	Shank Type	For Use With		Each
Standard (UN) Thread



	3/4"-16	Square	Helical Inserts, Screw-Locking Helical Inserts	000000000	000000