12-Point Sockets
The 12-point shape quickly positions on hex fasteners. These sockets are for hand-driven use only.
For technical drawings and 3-D models, click on a part number.
Wrench Heads
Reach nuts obstructed by a fluid line or other barrier with these wrench heads. Connect them to your socket extension and ratchet wrench to turn fasteners where clearance is limited from both the top and side. You can also attach one directly to your ratchet wrench to convert it into an open-ended ratcheting wrench. Also known as crowfoot wrenches.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Thick. | Center-to-Center Lg. | Material | Each | |
Inch | ||||||
|---|---|---|---|---|---|---|
1/2" Square Drive | ||||||
| 1 11/16" | 3 5/8" | 1/2" | 2 3/16" | Chrome-Plated Steel | 0000000 | 000000 |
Secure-Grip Wrench Heads
Grip more of your fastener head with these wrench heads. They have a hex or 12-point opening with more surface area than rounded wrench heads, so they make more contact with fasteners for a better hold. Also known as flare-nut crowfoot wrenches or line wrenches, they're often used with flared tube fittings as well as fuel and hydraulic lines. Connect them to your socket extension and ratchet wrench to turn fasteners where clearance is limited from both the top and side. You can also attach one directly to your ratchet wrench to convert it into an open-ended ratcheting wrench.
Wrenches with a 12-point opening quickly position on hex fasteners.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Thick. | Center-to-Center Lg. | Material | Wrench Opening Shape | Each | |
1/2" Square Drive | |||||||
|---|---|---|---|---|---|---|---|
| 1 11/16" | 3" | 1 1/32" | 1 9/16" | Chrome-Plated Steel | 12-Point | 0000000 | 000000 |
6-Point Impact Sockets
Achieve the best possible grip on hex fasteners and prevent rounding. These sockets are made to withstand the high torque and force of impact tools.
3/4", 1", and 1 1/2" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
Sockets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Clearance Depth | Retaining Rings | |||||||||
| Drive Size | Nut | Bolt | Compatible Retaining Ring ID | Material | Finish | Overall Lg. | Each | Each | ||
1/2" Square Drive | ||||||||||
| 1 11/16" | 1 1/16" | 1 11/16" | __ | Steel | Black Oxide | 2 3/8" | 00000000 | 000000 | 000000 | 00 |
3/4" Square Drive | ||||||||||
| 1 11/16" | 1 1/32" | 1 19/32" | 1 7/16" | Steel | Black Oxide | 2 9/16" | 0000000 | 00000 | 0000000 | 00000 |
1" Square Drive | ||||||||||
| 1 11/16" | 1" | 1 1/2" | 2 1/8" | Steel | Black Oxide | 2 11/16" | 00000000 | 00000 | 0000000 | 0000 |
Sockets | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Clearance Depth | Retaining Rings | |||||||||
| Drive Size | Nut | Bolt | Compatible Retaining Ring ID | Material | Finish | Overall Lg. | Each | Each | ||
1/2" Square Drive | ||||||||||
| 1 11/16" | 2 9/32" | 3 1/32" | __ | Steel | Black Oxide | 3 11/16" | 00000000 | 000000 | 000000 | 00 |
3/4" Square Drive | ||||||||||
| 1 11/16" | 1" | 2 17/32" | 1 7/16" | Steel | Black Oxide | 3 1/2" | 0000000 | 00000 | 0000000 | 00000 |
1" Square Drive | ||||||||||
| 1 11/16" | 2 1/2" | 3 3/32" | 2 1/8" | Steel | Black Oxide | 4 1/4" | 00000000 | 00000 | 0000000 | 0000 |
12-Point Impact Sockets
The 12-point shape quickly positions on hex fasteners. These sockets are made to withstand the high torque and force of impact tools.
3/4" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
12-Point Socket Sets
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish. The 12-point shape quickly positions on hex fasteners.
| No. of Pieces | Includes | Finish | Each | |
3/4" Square Drive—Steel | ||||
|---|---|---|---|---|
| 16 | Standard Sockets: 7/8",15/16",1",1 1/16",1 1/8",1 1/4",1 5/16",1 3/8",1 7/16",1 1/2",1 5/8",1 11/16",1 3/4",1 13/16", 1 7/8", 2" | Chrome Plated | 00000000 | 0000000 |
1" Square Drive—Steel | ||||
| 17 | Standard Sockets: 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 13/16", 1 7/8", 2", 2 1/8", 2 1/4", 2 5/16", 2 3/8" | Chrome Plated | 00000000 | 000000 |
| No. of Pieces | Components Included | Includes | Finish | Each | |
3/4" Square Drive—Steel | |||||
|---|---|---|---|---|---|
| 22 | 16 Sockets 2 Drive Tools 3 Extensions 1 Adapter | Standard Sockets: 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 13/16", 1 7/8", 2" 20 1/8" Long Ratchet Wrench 22 1/8" Long Flex-Head Wrench Handle 3" Long Extension 8" Long Extension 16" Long Extension 4 1/16" Square Drive Adapter | Chrome Plated | 0000000 | 000000000 |
| 29 | 22 Sockets 3 Drive Tools 3 Extensions 1 Adapter | Standard Sockets: 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 9/16", 1 5/8, 1 11/16", 1 3/4", 1 13/16", 1 7/8", 2", 2 1/8", 2 3/16", 2 1/4", 2 3/8" 20 1/8" Long Ratchet Wrench 19" Long Sliding-Head Wrench Handle 22 1/8" Long Flex-Head Wrench Handle 3" Long Extension 8" Long Extension 16" Long Extension 4 1/16" Long Flex Adapter | Chrome Plated | 0000000 | 00000000 |
| Foam Socket Organizer for 22 Piece 3/4" Square Drive Size Set | 0000000 | Each | 0000000 |
Wrench Head Sets
Reach nuts obstructed by a fluid line or other barrier with the wrench heads in these sets. Connect them to a socket extension and ratchet wrench to turn fasteners where clearance is limited from both the top and side. You can also attach one directly to your ratchet wrench to convert it into an open-ended ratcheting wrench. Also known as crowfoot wrenches.
| Wrench Opening Shape | No. of Pieces | Includes | Material | Each | |
Inch | |||||
|---|---|---|---|---|---|
1/2" Square Drive | |||||
| Rounded | 15 | Wrench Heads: 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 9/16", 1 5/8", 1 11/16", 1 3/4", 1 13/16", 1 7/8", 2" | Chrome-Plated Steel | 00000000 | 0000000 |
Ratcheting Combination Wrenches
A ratchet mechanism in the box end allows you to turn fasteners in tight spaces without removing and repositioning the wrench. Flip these wrenches over to ratchet in the opposite direction. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet. Wrenches are polished for a mirror-like finish.
For technical drawings and 3-D models, click on a part number.
Box End | Open End | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Drive Size | Overall Lg. | Head Thick. | Turn Required to Ratchet | Opening Angle | Head Thick. | Material | Appearance | Each | |
Inch—12-Point Box Opening | |||||||||
| 1 11/16" | 24 1/2" | 61/64" | 5° | 15° | 51/64" | Chrome-Plated Steel | Polished | 0000000 | 0000000 |
Combination Wrenches
 12-Point Box Opening |  |
|
Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact.
For technical drawings and 3-D models, click on a part number.
Ratcheting Box Wrenches
A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Head OD | Head Thick. | Turn Required to Ratchet | Material | Grip Material | Specifications Met | Each | |
Inch | |||||||||
|---|---|---|---|---|---|---|---|---|---|
12-Point Opening | |||||||||
| 1 11/16" | 19" | 3 3/8" | 5/8" | 20° | Chrome-Plated Steel | Plastic | Fed. Spec. GGG-W-001405 | 0000000 | 0000000 |
Striking Box Wrenches
Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free. Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Head Thick. | Material | Finish | Each | |
12-Point Opening | ||||||
|---|---|---|---|---|---|---|
| 1 11/16", 43 mm | 7 7/8" | 1 5/32" | Steel | Black Oxide | 0000000 | 0000000 |
Deep-Offset Striking Box Wrenches
The head is offset 45° to provide clearance for reaching over obstructions. Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free.
| Drive Size | Overall Lg. | Head Thick. | Head Offset Angle | Material | Finish | Specifications Met | Each | |
12-Point Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 11/16" | 12" | 1 1/16" | 45° | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |
Open-End Wrenches
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Finish | Specifications Met | Each | |
Inch | ||||||||
|---|---|---|---|---|---|---|---|---|
Rounded Opening | ||||||||
| 1 11/16" | 15" | 15° | 7/8" | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |
Two-Head Open-End Wrenches
Wrenches with square openings provide the best grip on square fasteners.
For technical drawings and 3-D models, click on a part number.
Dull Chrome Plated | ||||
|---|---|---|---|---|
| Drive Size | Opening Angle | Material | Each | |
Inch | ||||
Rounded Openings | ||||
| 1 11/16" × 1 13/16" | 15° | Steel | 0000000 | 0000000 |
60° Angle Open-End Wrenches
One head is angled 60° for access to hard-to-reach fasteners. These tools are also known as ignition wrenches.
For technical drawings and 3-D models, click on a part number.
Tight-Clearance Open-End Wrenches
Fit the narrow head into tight spaces and around thin fasteners.
For technical drawings and 3-D models, click on a part number.
Multi-Size Open-End Wrenches
Also known as alligator wrenches and water-meter nut wrenches, the V-shaped head fits multiple hex fastener sizes.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Jaw Finish | Material | Color | Grip Material | Each | |
| 3/4"–2" | 21" | Straight | 11/16" | Zinc Plated | Powder-Coated Steel | Red | Plastic | 0000000 | 0000000 |
Striking Open-End Wrenches
Strike the handle with a hammer to break stuck fasteners free. These are also known as slugging wrenches.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Specifications Met | Each | |
Rounded Opening | |||||||
|---|---|---|---|---|---|---|---|
Inch | |||||||
| 1 11/16" | 9 1/4" | 15° | 5/8" | Steel | DIN 133 | 00000000 | 0000000 |
Tapered-Handle Open-End Wrenches
Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.
For technical drawings and 3-D models, click on a part number.
| Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Finish | Specifications Met | Each | |
Rounded Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1 11/16" | 23" | 15° | 15/16" | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |