Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, these meet IEC requirements to drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.

Warning: These screwdrivers conduct electricity. Do not use them near active power sources.

Don't lug around a toolbox full of drivers—just swap out the bit to drive multiple screw sizes and styles with one tool. The ultimate space savers, these bit screwdrivers are a smart solution for on-the-go jobs.

These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter. To adjust torque, remove the black vinyl end cap and turn the attached adjustment key. When set torque is reached, the driver slips to disengage and stop turning the fastener, preventing overtightening. Sets come with a calibration certificate that states the product has passed a test for accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

Tougher than your average bits, the ones in these sets have a thin, flexible section on the shank that absorbs 30 times the impact force. They are heat treated for hardness and manufactured to tight tolerances, so they won't snap or slip under high stress.

Say goodbye to bulky screwdriver sets. Just swap out the shaft to fasten a variety of screws with a single tool. These screwdrivers free up space in your toolkit and are easy to carry wherever the job takes you.

Screwdrivers with an adjustable handle let you modify the shaft's length. Press down on the handle’s collar to slide the shaft in or out.

Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible.

Reach corners and tight spaces with the sizes you use most. These L-keys turn screws at an angle when you can’t access them head on. They have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly-packed areas, such as control panels and junction boxes. However, they don’t grip as tightly as straight tips, and may strip the drive of the fastener if you crank them too hard. These L-keys are precision manufactured to tight tolerances.

Keep the most common L-key sizes in one portable set so the right size is always ready. These L-keys are precision manufactured to tight tolerances for an exact fit.