L-Key Hex Drivers | McMaster-Carr

Filter by

Drive Size

System of Measurement

Drive Style

Hex with Pilot Recess

Tamper-Resistant Hex

Tamper-Resistant Torx

Tip Style

Driver Style

Sold As

Long Leg Length

Short Leg Length

Color

Finish

Overall Length

Material

Relative Length

Number of Pieces

Ball Location

Container Type

Compartmented Metal Box

Compartmented Plastic Box

Plastic Roll-Up Pouch

Driver Type

Maximum Access Angle

REACH

Performance

RoHS

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Screw-Holding Mechanism

Specifications Met

Certification

752 Products

Tip Style

Straight

Grip better than ball tips for tighter fastening

457 products

Ball

Turn screws at an angle when you can't access them head on

295 products

Relative Length

Stubby

An extra-short leg squeezes into spots with low overhead clearance

102 products

Performance

Screw Holding

Grip screws securely so you can fasten with one hand

37 products

L-Keys

The highest quality L-keys you can buy for tightening and loosening screws. Our L-keys are precision manufactured to tight tolerances for an exact fit and withstand high torque without bending or breaking. Made of hardened steel or stainless steel, they'll last a lifetime in your tool kit.

Steel—Our strongest, most wear-resistant L-keys. Steel is best for dry environments, since moisture will cause it to rust.

Black-Oxide Steel—Offer slightly better corrosion resistance than plain steel L-keys to stand up to occasional moisture.

Blue-Painted Steel—These metric-sized L-keys have a distinctive blue color, so you can easily tell them apart from inch L-keys. The coating provides minimal corrosion resistance, so they are best for dry environments.

Gold-Plated Steel—The 14-Karat gold finish resists corrosion better than black oxide to withstand rust in most wet and outdoor applications. However, gold is not as hard as other finishes, so it may wear off over time.

Nickel-Plated Steel—The plating resists salt water and chemicals better than gold plating and is less likely to wear off.

Black Phosphate-Coated Steel—Paint adheres evenly to the surface of these L-keys, so you can add your own finish. The dark, matte coating resists rust in most wet and outdoor applications. However, it won't hold up to salt water and chemicals.

Zinc-Flake-Coated Steel—The best of both worlds, these L-keys combine the superior strength of steel with the corrosion resistance of 316 stainless steel. Also known as Magni-coated L-keys, they have been tested to extreme standards, including 1,000 hours of salt spray.

Stainless Steel—With solid stainless steel construction, these L-keys have no coating that could flake off and damage the screw drive. They resist salt water and chemicals better than most of our steel L-keys, but are not quite as strong.

		Length
	Drive Size	Overall	Long Leg	Short Leg	Specifications Met		Each
Hex





				Black-Oxide Steel
				0.028"	1 1/4"	1 1/4"	1/4"	—	7122A11	00000
				0.028"	2 5/8"	2 5/8"	1/4"	—	7122A77	0000
				0.035"	1 1/4"	1 1/4"	3/8"	—	7122A12	0000
				0.035"	2 11/16"	2 11/16"	3/8"	—	7122A37	0000
				0.050"	1 11/16"	1 5/8"	1/2"	—	7122A13	0000
				0.050"	2 7/8"	2 13/16"	1/2"	—	7122A38	0000
				1/16"	1 13/16"	1 3/4"	9/16"	—	7122A14	0000
				1/16"	3 1/16"	3"	9/16"	—	7122A39	0000
				5/64"	2 1/16"	1 15/16"	5/8"	—	7122A15	0000
				5/64"	3 1/4"	3 3/16"	5/8"	—	7122A41	0000
				5/64"	6 1/16"	6"	5/8"	—	7122A61	0000
				5/64"	12 1/16"	12"	5/8"	—	7122A87	0000
				3/32"	2 1/8"	2"	11/16"	—	7122A16	0000
				3/32"	3 1/2"	3 3/8"	11/16"	—	7122A42	0000
				3/32"	6 1/8"	6"	11/16"	—	7122A62	0000
				3/32"	12 1/8"	12"	11/16"	—	7122A88	0000
				7/64"	2 1/4"	2 1/8"	11/16"	—	7122A17	0000
				7/64"	3 11/16"	3 9/16"	11/16"	—	7122A43	0000
				7/64"	6 1/8"	6"	11/16"	—	7122A63	0000
				1/8"	2 3/8"	2 1/4"	3/4"	—	7122A18	0000
				1/8"	3 7/8"	3 3/4"	3/4"	—	7122A44	0000
				1/8"	6 1/8"	6"	3/4"	—	7122A64	0000
				1/8"	12 1/8"	12"	3/4"	—	7122A89	0000
				9/64"	2 1/2"	2 3/8"	13/16"	—	7122A19	0000
				9/64"	4.167"	3 15/16"	13/16"	—	7122A45	0000
				9/64"	6 1/8"	6"	13/16"	—	7122A65	0000
				9/64"	12 1/8"	12"	13/16"	—	7122A96	0000
				5/32"	2 11/16"	2 1/2"	13/16"	—	7122A21	0000
				5/32"	4 1/4"	4 1/8"	13/16"	—	7122A46	0000
				5/32"	5 3/16"	6"	13/16"	—	7122A66	0000
				5/32"	12 3/16"	12"	13/16"	—	7122A91	0000
				3/16"	2 15/16"	2 3/4"	15/16"	—	7122A22	0000
				3/16"	4 11/16"	4 1/2"	15/16"	—	7122A47	0000
				3/16"	6 3/16"	6"	15/16"	—	7122A67	0000
				3/16"	12 3/16"	12"	15/16"	—	7122A92	0000
				7/32"	3 1/4"	3"	1"	—	7122A23	0000
				7/32"	5 1/8"	4 7/8"	1"	—	7122A48	0000
				7/32"	6 1/4"	6"	1"	—	7122A68	0000
				7/32"	12 1/4"	12"	1"	—	7122A93	0000
				1/4"	3 1/2"	3 1/4"	1 1/8"	—	7122A24	0000
				1/4"	5 1/2"	5 1/4"	1 1/8"	—	7122A49	0000
				1/4"	6 1/4"	6"	1 1/8"	—	7122A69	0000
				1/4"	12 1/4"	12"	1 1/8"	—	7122A94	0000
				5/16"	4 1/16"	3 3/4"	1 1/4"	—	7122A25	0000
				5/16"	6 5/16"	6"	1 1/4"	—	7122A51	0000
				3/8"	4 5/8"	4 1/4"	1 3/8"	—	7122A26	0000
				3/8"	6 3/8"	6"	1 3/8"	—	7122A95	0000
				3/8"	7 1/8"	6 3/4"	1 3/8"	—	7122A52	0000
				7/16"	5 3/16"	4 3/4"	1 1/2"	—	7122A27	0000
				7/16"	7 15/16"	7 1/2"	1 1/2"	—	7122A53	0000
				1/2"	5 3/4"	5 1/4"	1 5/8"	—	7122A28	0000
				1/2"	8 3/4"	8 1/4"	1 5/8"	—	7122A54	0000
				9/16"	6 5/16"	5 3/4"	1 3/4"	—	7122A29	0000
				9/16"	9 1/2"	9"	1 3/4"	—	7122A55	00000
				5/8"	6 7/8"	6 1/4"	1 7/8"	—	7122A31	0000
				5/8"	10 3/8"	9 3/4"	1 7/8"	—	7122A56	00000
				3/4"	8"	7 1/4"	2 1/8"	—	7122A32	00000
				3/4"	12"	11 1/4"	2 1/8"	—	7122A57	00000
7/8"				9 1/8"	8 1/4"	2 3/8"	—	7122A33	00000
7/8"	13 5/8"			12 3/4"	2 3/8"	—	7122A58	00000
1"	10 1/4"			9 1/4"	2 5/8"	—	7122A34	00000
1"	15 1/4"	14 1/4"		2 5/8"	—	7122A59	00000
1 1/4"	13 3/8"	12 1/8"	4 13/16"	—	7122A35	000000
1 1/4"	21 1/16"	19 13/16"	4 13/16"	—	7122A81	000000
1 1/2"	14 3/4"	13 1/4"	3 1/2"	—	7122A36	000000
1 1/2"	21 3/4"	20 1/4"	5 7/16"	—	7122A82	000000
1 3/4"	17"	15 1/4"	4"	—	7122A97	000000
1 3/4"	25"	23 1/4"	4 1/2"	—	7122A83	000000
2"	19 1/4"	17 1/2"	4 1/2"	—	7122A98	000000
2"	28 3/8"	26 3/8"	4 1/2"	—	7122A84	000000
0.70 mm	1 1/4"	1 1/4"	1/4"	—	7289A31	0000
0.70 mm	2 5/8"	2 5/8"	1/4"	—	6958A41	0000
0.90 mm	1 1/4"	1 1/4"	5/16"	—	7289A32	0000
0.90 mm	2 11/16"	2 11/16"	5/16"	—	6958A22	0000
1.3 mm	1 11/16"	1 5/8"	1/2"	—	7289A33	0000
1.3 mm	2 7/8"	2 13/16"	1/2"	—	6958A23	0000
1.4 mm	2 1/8"	2"	7/16"	—	7289A61	0000
1.5 mm	1 13/16"	1 3/4"	1/2"	—	7289A11	0000
1.5 mm	3 1/16"	3"	1/2"	—	6958A21	0000
2 mm	2"	1 15/16"	5/8"	—	7289A12	0000
2 mm	3 1/4"	3 3/16"	5/8"	—	6958A11	0000
2.5 mm	2 1/4"	2 1/8"	11/16"	—	7289A13	0000
2.5 mm	3 9/16"	3 1/2"	11/16"	—	6958A12	0000
3 mm	2 9/16"	2 7/16"	3/4"	—	7289A14	0000
3 mm	4"	3 7/8"	3/4"	—	6958A13	0000
3.5 mm	2 11/16"	2 9/16"	7/8"	—	7289A51	0000
3.5 mm	4 1/8"	4"	7/8"	—	6958A51	0000
4 mm	2 7/8"	2 11/16"	15/16"	—	7289A15	0000
4 mm	4 1/4"	4 1/16"	15/16"	—	6958A14	0000
4.5 mm	3 1/16"	2 7/8"	1"	—	7289A52	0000
4.5 mm	4 1/2"	4 5/16"	1"	—	6958A52	0000
5 mm	3 5/16"	3 1/16"	1 1/16"	—	7289A16	0000
5 mm	4 3/4"	4 9/16"	1 1/16"	—	6958A15	0000
5.5 mm	3 1/2"	3 1/4"	1 1/8"	—	7289A53	0000
5.5 mm	5 1/4"	5"	1 1/8"	—	6958A53	0000
6 mm	3 11/16"	3 1/2"	1 1/4"	—	7289A17	0000
6 mm	5 11/16"	5 7/16"	1 1/4"	—	6958A16	0000
7 mm	3 15/16"	3 11/16"	1 3/8"	—	7289A34	0000
7 mm	6 1/2"	6 3/16"	1 3/8"	—	6958A33	0000
8 mm	4 3/16"	3 7/8"	1 3/8"	—	7289A18	0000
8 mm	6 1/2"	6 3/16"	1 3/8"	—	6958A17	0000
9 mm	4 7/16"	4 1/16"	1 9/16"	—	7289A35	0000
9 mm	6 15/16"	6 9/16"	1 9/16"	—	6958A34	0000
10 mm	4 11/16"	4 5/16"	1 9/16"	—	7289A19	0000
10 mm	7"	6 9/16"	1 9/16"	—	6958A18	0000
11 mm	5 3/16"	4 3/4"	1 1/2"	—	7289A54	0000
11 mm	7 15/16"	7 1/2"	1 1/2"	—	6958A54	0000
12 mm	5 1/4"	4 13/16"	1 3/4"	—	7289A21	0000
12 mm	8 11/16"	8 1/4"	1 3/4"	—	6958A19	0000
13 mm	5 11/16"	5 1/8"	1 15/16"	—	7289A55	0000
13 mm	10"	9 1/2"	1 15/16"	—	6958A55	0000
14 mm	5 15/16"	5 3/8"	2 1/8"	—	7289A22	0000
14 mm	9 11/16"	9 3/16"	2 1/8"	—	6958A2	0000
15 mm	6 5/8"	6"	2 1/4"	—	7289A62	0000
16 mm	6 11/16"	6"	2 1/4"	—	7289A63	0000
17 mm	6 13/16"	6 1/8"	2 7/16"	—	7289A23	0000
17 mm	10 3/8"	9 11/16"	2 7/16"	—	6958A31	00000
18 mm	7 1/2"	6 3/4"	2 9/16"	—	7289A64	0000
19 mm	7 11/16"	6 15/16"	2 11/16"	—	7289A24	00000
19 mm	11 5/8"	10 7/8"	2 11/16"	—	6958A32	00000
20 mm	8 1/16"	7 1/4"	2 7/8"	—	7289A65	00000
21 mm	8 3/4"	7 7/8"	3"	—	7289A66	00000
22 mm	8 9/16"	7 11/16"	3 1/16"	—	7289A25	00000
22 mm	13 7/8"	13"	3 1/16"	—	6958A35	00000
23 mm	9 3/16"	8 1/4"	3 3/8"	—	7289A67	00000
24 mm	9 9/16"	8 5/8"	3 1/2"	—	7289A26	00000
24 mm	15 3/16"	14 1/4"	3 1/2"	—	6958A36	00000
26 mm	10 13/16"	9 3/4"	3 3/4"	—	7289A68	00000
27 mm	10 11/16"	9 5/8"	3 7/8"	—	7289A27	00000
27 mm	17 5/16"	16 1/4"	3 7/8"	—	6958A37	00000
30 mm	13 3/16"	11 1/2"	4 3/4"	—	7289A69	00000
32 mm	13 3/8"	12 1/8"	4 13/16"	—	7289A28	00000
32 mm	21 1/16"	19 13/16"	4 13/16"	—	6958A38	000000
36 mm	15 1/16"	13 5/8"	5 3/8"	—	7289A29	00000
36 mm	21 11/16"	20 1/4"	5 3/8"	—	6958A39	000000
41 mm	17 3/16"	15 1/2"	5 1/2"	—	7289A71	000000
46 mm	18 3/16"	16 1/4"	6 1/8"	—	7289A72	000000
50 mm	19"	17"	6 11/16"	—	7289A73	000000



		Blue-Painted Steel
		1.5 mm	1 3/4"	1 1/16"	9/16"	—	5984A21	0000
		1.5 mm	3 1/8"	3"	9/16"	—	5984A41	0000
		2 mm	2"	2"	5/8"	—	5984A22	0000
		2 mm	3 3/8"	3 3/16"	5/8"	—	5984A42	0000
		2.5 mm	2 1/4"	2 1/8"	11/16"	—	5984A23	0000
		2.5 mm	3 5/8"	3 1/2"	11/16"	—	5984A43	0000
		3 mm	2 1/2"	2 7/16"	3/4"	—	5984A24	0000
		3 mm	4 1/8"	4"	3/4"	—	5984A44	0000
		4 mm	2 7/8"	2 11/16"	7/8"	—	5984A25	0000
		4 mm	4 1/2"	4 5/16"	7/8"	—	5984A45	0000
		5 mm	3 3/8"	3 1/8"	1 1/16"	—	5984A26	0000
		5 mm	5"	4 11/16"	1 1/16"	—	5984A46	0000
		6 mm	3 3/4"	3 1/2"	1 1/4"	—	5984A27	0000
		6 mm	5 3/4"	5 1/2"	1 1/4"	—	5984A47	0000
		8 mm	4 1/4"	4"	1 3/8"	—	5984A28	0000
		8 mm	6 3/8"	6"	1 3/8"	—	5984A48	0000
		10 mm	4 3/4"	4 5/16"	1 9/16"	—	5984A29	0000
		10 mm	7 1/8"	6 11/16"	1 9/16"	—	5984A49	0000
		12 mm	5 3/8"	4 7/8"	1 3/4"	—	5984A31	00000
		12 mm	9 1/4"	8 3/4"	1 3/4"	—	5984A51	00000
		14 mm	6"	5 7/16"	2 3/16"	—	5984A32	00000
		14 mm	10 3/4"	10 1/4"	2 3/16"	—	5984A52	00000
		17 mm	6 7/8"	6 1/8"	2 7/16"	—	5984A33	00000
		17 mm	11 3/4"	11"	2 7/16"	—	5984A53	00000
		19 mm	7 3/4"	7"	2 3/4"	—	5984A34	00000
		19 mm	12 1/2"	11 3/4"	2 11/16"	—	5984A54	00000
		22 mm	8 1/2"	7 1/2"	3 1/8"	—	5984A35	00000
		22 mm	13 3/4"	13"	3 1/8"	—	5984A55	000000
		27 mm	9 1/2"	9 1/2"	3 7/8"	—	5984A36	000000



				Gold-Plated Steel
				0.028"	2 11/16"	2 5/8"	1/4"	—	6493A61	0000
				0.035"	2 13/16"	2 3/4"	3/8"	—	6493A62	0000
				0.050"	2 7/8"	2 13/16"	9/16"	—	6493A63	0000
				1/16"	3 1/16"	3"	9/16"	—	6493A64	0000
				5/64"	3 3/8"	3 1/4"	5/8"	—	6493A65	0000
				3/32"	3 9/16"	3 7/16"	3/4"	—	6493A66	0000
				7/64"	3 3/4"	3 5/8"	3/4"	—	6493A67	0000
				1/8"	3 15/16"	3 13/16"	3/4"	—	6493A68	0000
				9/64"	4 3/16"	4"	13/16"	—	6493A69	0000
				5/32"	4 7/16"	4 1/4"	7/8"	—	6493A71	0000
				3/16"	4 11/16"	4 1/2"	1"	—	6493A72	0000
				7/32"	5 3/16"	4 15/16"	1 1/16"	—	6493A73	0000
				1/4"	5 9/16"	5 5/16"	1 3/16"	—	6493A74	0000
				5/16"	6 5/16"	6"	1 1/4"	—	6493A75	0000
				3/8"	7 3/16"	6 13/16"	1 7/16"	—	6493A76	0000
				1.5 mm	3 1/16"	3"	9/16"	—	6493A77	0000
				2 mm	3 3/8"	3 1/4"	5/8"	—	6493A78	0000
				2.5 mm	3 5/8"	3 1/2"	3/4"	—	6493A79	0000
				3 mm	4 1/16"	3 15/16"	3/4"	—	6493A81	0000
				4 mm	4 1/2"	4 5/16"	7/8"	—	6493A82	0000
				5 mm	5"	4 3/4"	1 1/16"	—	6493A83	0000
				6 mm	5 3/4"	5 1/2"	1 1/4"	—	6493A84	0000
				8 mm	6 3/8"	6"	1 7/16"	—	6493A85	0000
				10 mm	7 3/16"	6 3/4"	1 9/16"	—	6493A86	0000



						Nickel-Plated Steel
1/16"						1 3/4"	1 11/16"	1/2"	DIN 911, ISO 2936	53425A29	0000
5/64"	1 15/16"					1 7/8"	9/16"	DIN 911, ISO 2936	53425A31	0000
3/32"	2 1/8"					2 1/16"	5/8"	DIN 911, ISO 2936	53425A32	0000
1/8"	2 7/16"					2 5/16"	11/16"	DIN 911, ISO 2936	53425A33	0000
5/32"	2 3/4"					2 5/8"	15/16"	DIN 911, ISO 2936	53425A34	0000
3/16"	3 3/16"					3"	1 1/16"	DIN 911, ISO 2936	53425A35	0000
7/32"	3 7/16"					3 3/16"	1 1/8"	DIN 911, ISO 2936	53425A36	0000
1/4"	3 5/8"					3 3/8"	1 3/16"	DIN 911, ISO 2936	53425A37	0000
5/16"	4"					3 11/16"	1 5/16"	DIN 911, ISO 2936	53425A38	0000
3/8"	4 9/16"					4 3/16"	1 1/2"	DIN 911, ISO 2936	53425A39	0000
1/2"	5 3/4"					5 1/4"	1 5/8"	—	53425A41	0000
1.5 mm	1 3/4"					1 11/16"	1/2"	—	53475A31	0000
2 mm	1 15/16"					1 7/8"	9/16"	—	53475A32	0000
2.5 mm	2 1/8"					2 1/16"	5/8"	—	53475A33	0000
3 mm	2 7/16"					2 5/16"	11/16"	—	53475A34	0000
4 mm	2 3/4"					2 5/8"	7/8"	—	53475A35	0000
5 mm	3 3/16"					3"	1"	—	53475A36	0000
6 mm	3 5/8"					3 3/8"	1 3/16"	—	53475A37	0000
7 mm	3 15/16"					3 11/16"	1 5/16"	—	53475A38	0000
8 mm	4"					3 11/16"	1 5/16"	—	53475A39	0000
9 mm	4 3/8"					4"	1 7/16"	—	53475A41	0000
10 mm	4 9/16"					4 3/16"	1 1/2"	—	53475A42	0000



						Stainless Steel
						1/8"	2 5/16"	2 1/4"	3/4"	—	53855A11	0000
						3/16"	4"	3 1/2"	1 3/8"	—	53855A13	0000
						7/32"	4 1/2"	4 7/16"	1 1/2"	—	53855A14	00000
						1/4"	4 3/4"	4 5/8"	1 3/4"	—	53855A15	00000
						5/16"	5"	4 3/4"	1 5/8"	—	53855A16	00000
						3/8"	6"	5 3/4"	2 1/4"	—	53855A17	00000
						1/2"	8 1/2"	8"	2 1/2"	—	53855A22	00000
		2 mm				2 1/4"	2 1/8"	7/8"	—	53855A41	00000
		2.5 mm	2 1/4"			2 1/8"	7/8"	—	53855A42	00000
		3 mm	2 1/2"			2 5/16"	15/16"	—	53855A43	00000
		4 mm	2 3/4"			2 9/16"	7/8"	—	53855A44	00000
		5 mm	3"			2 7/8"	1"	—	53855A45	00000
		6 mm	3 1/2"			3 1/4"	1 1/8"	—	53855A46	00000
		7 mm	4 1/2"			4 1/8"	1 5/16"	—	53855A47	00000
		8 mm	4 3/4"			4 7/16"	1 1/8"	—	53855A48	00000
		10 mm	5 1/4"			4 3/4"	1 3/8"	—	53855A49	00000

		Tamper-Resistant Hex





								Steel
								3/32"	2 3/8"	2 1/4"	5/8"	—	7390A19	0000
								1/8"	2 3/8"	2 1/4"	3/4"	—	7390A21	0000
								5/32"	2 5/8"	2 1/2"	13/16"	—	7390A27	0000
								3/16"	2 15/16"	2 3/4"	15/16"	—	7390A32	0000
								7/32"	3 1/4"	3"	1"	—	7390A33	0000



										Black-Oxide Steel
										1/4"	5 1/2"	5 1/4"	1 3/8"	—	7390A54	0000
										5/16"	5 9/16"	5 1/4"	1 3/8"	—	7390A55	0000
										3/8"	5 5/8"	5 1/4"	1 3/8"	—	7390A56	0000



										Black Phosphate-Coated Steel
										2.5 mm	3 9/16"	3 1/2"	11/16"	—	7390A58	0000
										3 mm	4"	3 7/8"	3/4"	—	7390A59	0000
										4 mm	4 1/2"	4 5/16"	7/8"	—	7390A61	0000
										5 mm	4 7/8"	4 11/16"	1 1/16"	—	7390A62	0000
										6 mm	5 11/16"	5 1/2"	1 1/4"	—	7390A63	0000
										8 mm	6 5/16"	6"	1 3/8"	—	7390A64	0000
										10 mm	7 1/8"	6 11/16"	1 9/16"	—	7390A65	0000

										Hex with Pilot Recess





														Nickel-Plated Steel
														3 mm	2 9/16"	2 1/2"	3/4"	DIN 6911	4585N13	0000
														4 mm	2 13/16"	2 3/4"	1"	DIN 6911	4585N14	0000
														12 mm	5 3/8"	4 15/16"	1 3/4"	DIN 6911	4585N21	00000



Zinc-Flake-Coated Steel
5 mm																3 5/16"	3 1/8"	1 1/8"	DIN 6911	4585N15	0000
6 mm	3 3/4"															3 9/16"	1 1/4"	DIN 6911	4585N16	0000
7 mm	4"															3 3/4"	1 5/16"	DIN 6911	4585N17	0000
8 mm	4 1/4"															3 15/16"	1 7/16"	DIN 6911	4585N18	0000
10 mm	4 13/16"															4 3/8"	1 9/16"	DIN 6911	4585N19	00000

Torx





																		Black-Oxide Steel
																		T5	1 11/16"	1 9/16"	1/2"	—	6959A89	0000
																		T5	3"	2 3/4"	1/2"	—	6959A87	0000
																		T6	3 1/16"	2 13/16"	1/2"	—	6959A72	0000
																		T7	3 3/16"	2 7/8"	9/16"	—	6959A73	0000
																		T8	3 1/4"	3"	9/16"	—	6959A74	0000
																		T9	3 3/8"	3 1/4"	5/8"	—	6959A75	0000
																		T40	5 3/16"	4 15/16"	1 1/16"	—	6959A76	0000
																		T45	5 9/16"	5 1/4"	1 3/16"	—	6959A77	0000
																		T50	6 5/16"	6"	1 1/4"	—	6959A78	0000
		T55																7 3/16"	6 3/4"	1 7/16"	—	6959A79	0000
		T60	5 1/4"															4 3/4"	1 11/16"	—	6959A86	0000
		T60	8"															7 1/2"	1 11/16"	—	6959A88	0000



						Black Phosphate-Coated Steel
						T6	1 1/4"											1 1/8"	5/8"	—	6959A11	0000
						T7	1 1/2"											1 3/8"	5/8"	—	6959A12	0000
						T8	1 3/4"											1 5/8"	5/8"	—	6959A14	0000
						T9	1 13/16"											1 7/8"	5/8"	—	6959A16	0000
						T10	2 1/16"											1 15/16"	3/4"	—	6959A18	0000
						T10	3 1/4"	3 3/16"										3/4"	—	6959A41	0000
						T15	2 7/16"	2 5/16"	3/4"									—	6959A21	0000
						T15	3 7/16"	3 5/16"	3/4"									—	6959A42	0000
						T20	2 3/4"	2 5/8"	3/4"									—	6959A23	0000
						T20	3 3/4"	3 5/8"	3/4"									—	6959A43	0000
						T25	3"	2 13/16"	7/8"									—	6959A25	0000
						T25	4"	3 13/16"	7/8"									—	6959A44	0000
				T27		3 3/8"	3 3/16"	15/16"	—									6959A27	0000
				T27	4 3/8"	4 3/16"	15/16"	—	6959A45									0000
				T30	3 3/4"	3 5/8"	1"	—	6959A29									0000
				T30	4 3/4"	4 5/8"	1"	—	6959A46									0000
				T40	4 1/8"	3 7/8"	1 1/8"	—	6959A32									0000
				T45	4 1/8"	3 7/8"	1 3/16"	—	6959A34									0000
				T50	4 1/8"	3 13/16"	1 1/4"	—	6959A36									0000
				T55	4 3/16"	3 13/16"	1 3/8"	—	6959A38									0000

				Tamper-Resistant Torx





								Black-Oxide Steel
								T6	3 1/16"	2 15/16"	5/8"	—						55525A43	0000
								T8	1 15/16"	1 13/16"	5/8"	—	55525A23					0000
								T9	2 1/16"	1 15/16"	5/8"	—	55525A24					0000
								T10	2 1/4"	2 1/8"	3/4"	—	55525A25					0000
								T15	2 1/4"	2 1/8"	3/4"	—	55525A26					0000
								T20	2 1/2"	2 5/16"	3/4"	—	55525A27					0000
								T25	2 11/16"	2 1/2"	13/16"	—	55525A28					0000
								T27	2 7/8"	2 5/8"	15/16"	—	55525A29	0000
								T30	3 3/8"	3 1/8"	15/16"	—	55525A31	0000
								T40	3 7/16"	3 1/8"	1"	—	55525A32	0000
								T45	3 9/16"	3 1/4"	1 1/8"	—	55525A33	0000
								T50	6 1/8"	6"	1 1/4"	—	55525A34	0000
								T55	7"	6 3/4"	1 3/8"	—	55525A35	00000



								Black Phosphate-Coated Steel
								T7	2 1/2"	2 3/8"	5/8"	—	55525A22	0000

								Torx Plus





												Black-Oxide Steel
												IP6	2 3/4"	2 5/8"	5/8"	—	3726A23	0000
												IP7	2 15/16"	2 13/16"	5/8"	—	3726A24	0000
												IP8	1 7/8"	1 3/4"	5/8"	—	3726A13	0000
												IP8	3 1/16"	3"	5/8"	—	3726A25	0000
												IP9	2 1/16"	1 15/16"	5/8"	—	3726A14	0000
												IP9	3 1/4"	3 3/16"	5/8"	—	3726A26	0000
												IP10	2 3/16"	2 1/16"	3/4"	—	3726A15	0000
		IP10										3 1/2"	3 5/16"	3/4"	—	3726A27	0000
		IP15	2 5/16"									2 3/16"	3/4"	—	3726A16	0000
		IP15	3 3/4"									3 9/16"	3/4"	—	3726A28	0000
		IP20	2 1/2"									2 5/16"	3/4"	—	3726A17	0000
		IP20	3 15/16"									3 3/4"	3/4"	—	3726A29	0000
		IP25	2 11/16"									2 1/2"	13/16"	—	3726A18	0000
		IP25	4 3/16"									4"	3/4"	—	3726A31	0000
		IP27	2 7/8"									2 11/16"	15/16"	—	3726A19	0000
		IP27	4 1/2"									4 1/4"	15/16"	—	3726A32	0000
		IP30	3 1/8"									2 7/8"	15/16"	—	3726A21	0000
		IP30	4 13/16"									4 9/16"	15/16"	—	3726A33	0000
		IP40	3 1/2"									3 3/16"	1"	—	3726A22	0000
		IP40	5 3/16"									4 7/8"	1"	—	3726A34	0000

		4-Flute Spline





														Black-Oxide Steel
														0.033"	1 5/16"	1 1/4"	1/4"	—	7048A11	0000
														0.048"	1 5/16"	1 1/4"	3/8"	—	7048A12	0000
														0.048"	3 3/16"	3 1/8"	3/8"	—	7048A61	0000
														0.069"	1 7/8"	1 3/4"	9/16"	—	7048A15	0000
														0.069"	3 3/16"	3 1/8"	9/16"	—	7048A62	0000
				0.076"										1 7/8"	1 3/4"	9/16"	—	7048A16	0000
				0.076"	3 3/16"									3 1/8"	9/16"	—	7048A63	0000

				6-Flute Spline





														Black-Oxide Steel
														0.048"	1 5/16"	1 1/4"	3/8"	—	7048A13	0000
														0.048"	3 3/16"	3 1/8"	3/8"	—	7048A64	0000
														0.060"	1 3/4"	1 11/16"	9/16"	—	7048A14	0000
														0.060"	3 3/16"	3 1/8"	9/16"	—	7048A65	0000
														0.072"	1 7/8"	1 3/4"	9/16"	—	7048A17	0000
														0.072"	3 3/16"	3 1/8"	9/16"	—	7048A66	0000
														0.096"	2"	1 7/8"	5/8"	—	7048A18	0000
														0.096"	3 1/4"	3 1/8"	5/8"	—	7048A31	0000
														0.111"	2 1/8"	2"	11/16"	—	7048A19	0000
0.111"														3 1/2"	3 3/8"	11/16"	—	7048A32	0000
0.133"	2 5/16"													2 1/8"	3/4"	—	7048A21	0000
0.133"	3 3/4"													3 9/16"	3/4"	—	7048A33	0000
0.145"	2 7/16"													2 1/4"	3/4"	—	7048A22	0000
0.145"	3 15/16"													3 3/4"	3/4"	—	7048A34	0000
0.168"	2 9/16"													2 3/8"	7/8"	—	7048A23	00000
0.168"	4 1/8"													3 15/16"	13/16"	—	7048A35	00000
0.183"	2 11/16"													2 1/2"	7/8"	—	7048A24	00000
0.183"	4 5/16"							4 1/8"						7/8"	—	7048A36	00000
0.216"	2 7/8"							2 3/4"	15/16"					—	7048A25	00000
0.216"	4 11/16"							4 1/2"	15/16"	—				7048A37	00000

Easy-Align Ball-Tip L-Keys

Turn screws at an angle when you can't access them head on. These L-keys have a ball tip on the long leg that engages the drive with less contact than a straight tip. They're handy for corners and tightly-packed areas, such as control panels and junction boxes. However, ball tips don't grip as tightly as straight tips and may strip threads if you crank them too hard. These L-keys are precision manufactured to tight tolerances. Made of high-quality hardened steel or stainless steel, they'll last a lifetime in your tool kit.

Black-Oxide Steel—Offer slightly better corrosion resistance than plain steel L-keys to stand up to occasional moisture.

		Length
	Drive Size	Overall	Long Leg	Short Leg	Max. Access Angle		Each
Hex





				Black-Oxide Steel
				5/64"	4 1/8"	4"	5/8"	20°	57185A43	00000
				3/32"	4 9/16"	4 7/16"	3/4"	20°	57185A11	0000
				7/64"	4 7/8"	4 3/4"	3/4"	20°	57185A44	0000
				1/8"	5 1/8"	5"	13/16"	20°	57185A12	0000
				9/64"	5 3/8"	5 3/16"	15/16"	20°	57185A45	0000
				5/32"	5 11/16"	5 1/2"	1"	20°	57185A13	0000
				3/16"	6 1/2"	6 5/16"	1"	20°	57185A14	0000
				7/32"	7 5/16"	7 1/16"	1 1/16"	20°	57185A15	0000
				1/4"	7 3/4"	7 1/2"	1 5/16"	20°	57185A16	0000
				5/16"	8 1/4"	8"	1 7/16"	20°	57185A17	0000
				3/8"	8 3/4"	8 1/2"	1 1/2"	20°	57185A18	0000
				1.5 mm	3 9/16"	3 1/2"	9/16"	20°	57185A34	0000
				2 mm	4 1/8"	4"	5/8"	20°	57185A21	0000
				2.5 mm	4 9/16"	4 7/16"	3/4"	20°	57185A22	0000
				3 mm	5 1/8"	5"	3/4"	20°	57185A23	0000
				4 mm	5 11/16"	5 1/2"	1"	20°	57185A24	0000
				5 mm	6 9/16"	6 5/16"	1 1/8"	20°	57185A25	0000
				6 mm	7 5/16"	7 1/16"	1 1/4"	20°	57185A26	0000
				8 mm	8 1/2"	8"	1 7/16"	20°	57185A28	0000
				10 mm	9 1/4"	8 3/4"	1 9/16"	20°	57185A31	0000



						Gold-Plated Steel
						0.050"	2 7/8"	2 13/16"	9/16"	25°	7813A21	0000
						1/16"	3 1/16"	3"	9/16"	25°	7813A22	0000
						5/64"	3 3/8"	3 1/4"	5/8"	25°	7813A23	0000
						3/32"	3 9/16"	3 7/16"	11/16"	25°	7813A24	0000
						7/64"	3 3/4"	3 5/8"	3/4"	25°	7813A25	0000
						1/8"	3 15/16"	3 13/16"	3/4"	25°	7813A26	0000
						9/64"	4 3/16"	4"	13/16"	25°	7813A27	0000
						5/32"	4 7/16"	4 1/4"	7/8"	25°	7813A28	0000
						3/16"	4 11/16"	4 1/2"	1"	25°	7813A29	0000
						7/32"	5 3/16"	4 15/16"	1 1/16"	25°	7813A31	0000
						1/4"	5 7/8"	5 5/8"	1 3/16"	25°	7813A32	0000
						5/16"	6 5/16"	6"	1 1/4"	25°	7813A33	0000
						3/8"	7 3/16"	6 13/16"	1 7/16"	25°	7813A34	0000
						7/16"	7 15/16"	7 1/2"	1 1/2"	25°	7813A35	00000
						1/2"	8 3/4"	8 1/4"	1 11/16"	25°	7813A36	00000
						1.27 mm	2 7/8"	2 13/16"	9/16"	25°	7813A41	0000
						1.5 mm	3 1/16"	3"	9/16"	25°	7813A42	0000
						2 mm	3 3/8"	3 1/4"	5/8"	25°	7813A43	0000
						2.5 mm	3 5/8"	3 1/2"	3/4"	25°	7813A44	0000
						3 mm	4 1/16"	3 15/16"	3/4"	25°	7813A45	0000
						4 mm	4 1/2"	4 5/16"	7/8"	25°	7813A46	0000
						5 mm	5"	4 3/4"	1 1/16"	25°	7813A47	0000
						6 mm	5 3/4"	5 1/2"	1 1/4"	25°	7813A48	0000
						8 mm	6 3/8"	6"	1 7/16"	25°	7813A49	0000
						10 mm	7 3/16"	6 3/4"	1 9/16"	25°	7813A51	0000



								Black Phosphate-Coated Steel
								0.050"	2 7/8"	2 13/16"	9/16"	25°	5503A13	0000
								1/16"	3 1/16"	3"	9/16"	25°	5503A14	0000
								5/64"	3 3/8"	3 1/4"	5/8"	25°	5503A15	0000
								3/32"	3 9/16"	3 7/16"	11/16"	25°	5503A16	0000
								7/64"	3 3/4"	3 5/8"	3/4"	25°	5503A17	0000
1/8"								3 15/16"	3 13/16"	3/4"	25°	5503A18	0000
9/64"	4 3/16"							4"	13/16"	25°	5503A19	0000
5/32"	4 7/16"							4 1/4"	7/8"	25°	5503A21	0000
3/16"	4 11/16"	4 1/2"						1"	25°	5503A22	0000
7/32"	5 3/16"	4 15/16"	1 1/16"					25°	5503A23	0000
1/4"	5 7/8"	5 5/8"	1 3/16"					25°	5503A24	0000
5/16"	6 5/16"	6"	1 1/4"					25°	5503A25	0000
3/8"	7 3/16"	6 13/16"	1 7/16"					25°	5503A26	0000
7/16"	7 15/16"	7 1/2"	1 1/2"					25°	5503A27	00000
1/2"	8 3/4"	8 1/4"	1 11/16"					25°	5503A28	00000
9/16"	9 1/2"	9"	1 3/4"					25°	5503A29	00000
5/8"	10 1/2"	9 3/4"	1 15/16"					25°	5503A31	00000
3/4"	12"	11 1/4"	2 3/16"					25°	5503A32	00000
7/8"	13 3/4"	12 3/4"	2 3/8"					25°	5503A33	00000
1"	15 1/4"	14 1/4"	2 5/8"					25°	5503A34	00000
1.27 mm	2 7/8"	2 13/16"	9/16"					25°	5503A35	0000
1.5 mm	3 1/16"	3"	9/16"					25°	5503A36	0000
2 mm	3 3/8"	3 1/4"	5/8"					25°	5503A37	0000
2.5 mm	3 5/8"	3 1/2"	3/4"					25°	5503A38	0000
3 mm	4 1/16"	3 15/16"	3/4"					25°	5503A39	0000
3.5 mm	4 1/8"	3 15/16"	7/8"					25°	5503A41	0000
4 mm	4 1/2"	4 5/16"	7/8"					25°	5503A42	0000
4.5 mm	4 11/16"	4 1/2"	1"					25°	5503A43	0000
5 mm	5"	4 3/4"	1 1/16"					25°	5503A44	0000
5.5 mm	5 3/16"	4 15/16"	1 3/16"					25°	5503A45	0000
6 mm	5 3/4"	5 1/2"	1 1/4"					25°	5503A46	0000
7 mm	5 13/16"	5 1/2"	1 5/16"					25°	5503A47	0000
8 mm	6 3/8"	6"	1 7/16"	25°				5503A48	0000
9 mm	6 5/8"	6 1/4"	1 1/2"	25°	5503A49			0000
10 mm	7 3/16"	6 3/4"	1 9/16"	25°	5503A51			0000
11 mm	8 1/2"	7 15/16"	1 11/16"	25°	5503A52			00000
12 mm	9 1/4"	8 3/4"	1 3/4"	25°	5503A53			00000
13 mm	10"	9 1/2"	1 7/8"	25°	5503A59			00000
14 mm	10 3/4"	10 1/4"	2 3/16"	25°	5503A54			00000
17 mm	11 3/4"	11"	2 7/16"	25°	5503A55			00000
19 mm	12 1/2"	11 3/4"	2 3/4"	25°	5503A56			00000
22 mm	14"	13"	3 1/8"	25°	5503A57			00000
24 mm	15 1/2"	14 1/2"	3 1/2"	25°	5503A58			00000



		Stainless Steel
		3/32"	5 1/16"	4 7/16"	3/4"			20°	5020A33	0000
		7/64"	4 7/8"	4 3/4"	13/16"			20°	5020A34	0000
		1/8"	5"	4 7/8"	7/8"			20°	5020A35	0000
		9/64"	5 3/8"	5 3/16"	15/16"			20°	5020A36	0000
		5/32"	5 9/16"	5 3/8"	1"			20°	5020A37	0000
		3/16"	6 1/4"	6 1/16"	1 1/16"			20°	5020A38	0000
		1/4"	7 1/2"	7 1/4"	1 5/16"			20°	5020A41	0000
		5/16"	8"	7 11/16"	1 7/16"			20°	5020A42	00000
		3/8"	9 1/2"	9"	1 11/16"			20°	5020A43	00000
		1.5 mm	3 9/16"	3 1/2"	9/16"			20°	5020A21	0000
		2 mm	4 1/8"	4"	5/8"			20°	5020A22	0000
		2.5 mm	4 9/16"	4 7/16"	3/4"			20°	5020A23	0000
		3 mm	5"	4 7/8"	7/8"			20°	5020A24	0000
		4 mm	5 11/16"	5 3/8"	1"			20°	5020A25	0000
		5 mm	6 5/16"	6 1/16"	1 1/16"			20°	5020A26	0000
		6 mm	7"	6 3/4"	1 1/4"	20°		5020A27	0000
		8 mm	8"	7 11/16"	1 7/16"	20°	5020A28	00000
		10 mm	9 1/2"	9"	1 11/16"	20°	5020A29	00000

		Torx





						Black Phosphate-Coated Steel
						T6	2 3/16"	2 1/8"	11/16"	20°	54575A45	0000
						T7	2 1/2"	2 7/16"	11/16"	20°	54575A46	0000
						T8	2 3/4"	2 5/8"	11/16"	20°	54575A47	0000
						T9	3"	2 15/16"	11/16"	20°	54575A31	0000
						T10	3 5/16"	3 1/4"	3/4"	20°	54575A32	0000
						T15	3 7/16"	3 5/16"	13/16"	20°	54575A33	0000
						T20	3 13/16"	3 5/8"	13/16"	20°	54575A34	0000
						T25	4"	3 13/16"	15/16"	20°	54575A35	0000
						T27	4 7/16"	4 1/4"	1"	20°	54575A36	0000
						T30	4 7/8"	4 5/8"	1 1/16"	20°	54575A37	0000
						T40	5 3/16"	4 15/16"	1 1/8"	20°	54575A38	0000
						T45	5 3/4"	5 7/16"	1 1/4"	20°	54575A39	0000
						T50	6 9/16"	6 1/4"	1 1/4"	20°	54575A41	0000
						T55	7 3/16"	6 3/4"	1 3/8"	20°	54575A42	00000

L-Key Sets


With Metal Compartmented Box	With Metal Case	With Plastic Bag	Plastic Caddy

With Plastic Pouch	With Plastic Ring	With Plastic Roll-Up Pouch

Keep a selection of top-quality L-keys on hand, so you always have the size you need. Our L-keys are precision manufactured to tight tolerances for an exact fit and withstand high torque without bending or breaking. Made of hardened steel or stainless steel, they'll last a lifetime in your tool kit.

Steel—Our strongest, most wear-resistant L-keys. Steel is best for dry environments, since moisture will cause it to rust.

Black-Oxide Steel—Offer slightly better corrosion resistance than plain steel L-keys to stand up to occasional moisture.

Nickel-Plated Steel—The plating resists salt water and chemicals better than gold plating and is less likely to wear off.

	Includes	Material	Container Type		Each
Hex





			Short Length
			7	1/4" Hex L-Key (4 3/4" O'all Lg.) 1/8" Hex L-Key (2 5/16" O'all Lg.) 3/16" Hex L-Key (4" O'all Lg.) 3/8" Hex L-Key (6" O'all Lg.) 5/16" Hex L-Key (5" O'all Lg.) 5/32" Hex L-Key (2 1/2" O'all Lg.) 7/32" Hex L-Key (4 1/2" O'all Lg.)	Stainless Steel	Plastic Pouch	53855A18	000000
			8	2 mm Hex L-Key (2 1/4" O'all Lg.) 2.5 mm Hex L-Key (2 1/4" O'all Lg.) 3 mm Hex L-Key (2 3/4" O'all Lg.) 4 mm Hex L-Key (2 3/4" O'all Lg.) 5 mm Hex L-Key (3" O'all Lg.) 6 mm Hex L-Key (3 1/2" O'all Lg.) 8 mm Hex L-Key (4 3/4" O'all Lg.) 10 mm Hex L-Key (5 1/4" O'all Lg.)	Stainless Steel	Plastic Pouch	53855A51	000000
			9	1.5 mm Hex L-Key (1 13/16" O'all Lg.) 2 mm Hex L-Key (2 1/16" O'all Lg.) 2.5 mm Hex L-Key (2 1/4" O'all Lg.) 3 mm Hex L-Key (2 9/16" O'all Lg.) 4 mm Hex L-Key (2 15/16" O'all Lg.) 5 mm Hex L-Key (3 3/8" O'all Lg.) 6 mm Hex L-Key (3 3/4" O'all Lg.) 8 mm Hex L-Key (4 5/16" O'all Lg.) 10 mm Hex L-Key (4 3/4" O'all Lg.)	Black Phosphate-Coated Steel	Plastic Caddy	5511A41	00000
			9	1.5 mm Hex L-Key (1 3/4" O'all Lg.) 2 mm Hex L-Key (2" O'all Lg.) 2.5 mm Hex L-Key (2 1/4" O'all Lg.) 3 mm Hex L-Key (2 1/2" O'all Lg.) 4 mm Hex L-Key (2 7/8" O'all Lg.) 5 mm Hex L-Key (3 3/8" O'all Lg.) 6 mm Hex L-Key (3 3/4" O'all Lg.) 8 mm Hex L-Key (4 1/4" O'all Lg.) 10 mm Hex L-Key (4 3/4 O'all Lg.)	Blue-Painted Steel	Plastic Caddy	5789A19	00000
			9	1.5 mm Hex L-Key (2" O'all Lg.) 2 mm Hex L-Key (2 1/16" O'all Lg.) 2.5 mm Hex L-Key (2 1/4" O'all Lg.) 3 mm Hex L-Key (2 9/16" O'all Lg.) 4 mm Hex L-Key (2 7/8" O'all Lg.) 5 mm Hex L-Key (3 5/16" O'all Lg.) 6 mm Hex L-Key (3 3/4" O'all Lg.) 8 mm Hex L-Key (4 3/16" O'all Lg.) 10 mm Hex L-Key (4 11/16" O'all Lg.)	Nickel-Plated Steel	Plastic Caddy	53475A45	00000
			10	1/16" Hex L-Key (2 3/8" O'all Lg.) 1/4" Hex L-Key (4 7/16" O'all Lg.) 1/8" Hex L-Key (3 1/16" O'all Lg.) 3/16" Hex L-Key (3 3/4" O'all Lg.) 3/32" Hex L-Key (2 11/16" O'all Lg.) 5/32" Hex L-Key (3 3/8" O'all Lg.) 5/64" Hex L-Key (2 9/16" O'all Lg.) 7/32" Hex L-Key (4 1/16" O'all Lg.) 7/64" Hex L-Key (2 13/16" O'all Lg.) 9/64" Hex L-Key (3 1/4" O'all Lg.)	Zinc-Flake-Coated Steel	Plastic Caddy	4891A28	00000
			12	0.71 mm Hex L-Key (1 5/16" O'all Lg.) 0.89 mm Hex L-Key (1 5/16" O'all Lg.) 1.27 mm Hex L-Key (1 3/4" O'all Lg.) 1.5 mm Hex L-Key (1 13/16" O'all Lg.) 2 mm Hex L-Key (2 1/16" O'all Lg.) 2.5 mm Hex L-Key (2 5/16" O'all Lg.) 3 mm Hex L-Key (2 9/16" O'all Lg.) 4 mm Hex L-Key (2 7/8" O'all Lg.) 5 mm Hex L-Key (3 3/8" O'all Lg.) 6 mm Hex L-Key (3 3/4" O'all Lg.) 8 mm Hex L-Key (4 1/4" O'all Lg.) 10 mm Hex L-Key (4 3/4" O'all Lg.)	Black-Oxide Steel	Plastic Pouch	6956A13	00000
			12	0.71 mm Hex L-Key (1 5/16" O'all Lg.) 0.89 mm Hex L-Key (1 5/16" O'all Lg.) 1.27 mm Hex L-Key (1 11/16" O'all Lg.) 1.5 mm Hex L-Key (1 13/16" O'all Lg.) 2 mm Hex L-Key (2 1/16" O'all Lg.) 2.5 mm Hex L-Key (2 1/4" O'all Lg.) 3 mm Hex L-Key (2 9/16" O'all Lg.) 4 mm Hex L-Key (2 15/16" O'all Lg.) 5 mm Hex L-Key (3 3/8" O'all Lg.) 6 mm Hex L-Key (3 3/4" O'all Lg.) 8 mm Hex L-Key (4 5/16" O'all Lg.) 10 mm Hex L-Key (4 3/4" O'all Lg.)	Black Phosphate-Coated Steel	Metal Case	5388A31	00000
			12	1.5 mm Hex L-Key (1 7/8" O'all Lg.) 2 mm Hex L-Key (2" O'all Lg.) 2.5 mm Hex L-Key (2 1/4" O'all Lg.) 3 mm Hex L-Key (2 5/8" O'all Lg.) 4 mm Hex L-Key (2 7/8" O'all Lg.) 5 mm Hex L-Key (3 3/8" O'all Lg.) 6 mm Hex L-Key (3 3/4" O'all Lg.) 8 mm Hex L-Key (4 1/4" O'all Lg.) 10 mm Hex L-Key (4 3/4 O'all Lg.) 12 mm Hex L-Key (5 1/4" O'all Lg.) 14 mm Hex L-Key (6" O'all Lg.) 17 mm Hex L-Key (6 7/8" O'all Lg.)	Blue-Painted Steel	Plastic Pouch	5789A18	00000
			13	0.050" Hex L-Key (1 3/4" O'all Lg.) 1/16" Hex L-Key (1 13/16" O'all Lg.) 1/4" Hex L-Key (3 1/2" O'all Lg.) 1/8" Hex L-Key (2 3/8" O'all Lg.) 3/16" Hex L-Key (2 15/16" O'all Lg.) 3/32" Hex L-Key (2 1/8" O'all Lg.) 3/8" Hex L-Key (4 5/8" O'all Lg.) 5/16" Hex L-Key (4 1/16" O'all Lg.) 5/32" Hex L-Key (2 11/16" O'all Lg.) 5/64" Hex L-Key (2 1/16" O'all Lg.) 7/32" Hex L-Key (3 1/4" O'all Lg.) 7/64" Hex L-Key (2 1/4" O'all Lg.) 9/64" Hex L-Key (2 5/8" O'all Lg.)	Black-Oxide Steel	Plastic Caddy	7158A26	00000
			13	0.050" Hex L-Key (2 3/16" O'all Lg.) 1/16" Hex L-Key (2 3/8" O'all Lg.) 1/4" Hex L-Key (4 7/16" O'all Lg.) 1/8" Hex L-Key (3 1/16" O'all Lg.) 3/16" Hex L-Key (3 3/4" O'all Lg.) 3/32" Hex L-Key (2 11/16" O'all Lg.) 3/8" Hex L-Key (5 11/16" O'all Lg.) 5/16" Hex L-Key (5 1/16" O'all Lg.) 5/32" Hex L-Key (3 3/8" O'all Lg.) 5/64" Hex L-Key (2 9/16" O'all Lg.) 7/32" Hex L-Key (4 1/16" O'all Lg.) 7/64" Hex L-Key (2 13/16" O'all Lg.) 9/64" Hex L-Key (3 1/4" O'all Lg.)	Zinc-Flake-Coated Steel	Plastic Caddy	4891A25	00000
			15	0.028" Hex L-Key (1 5/16" O'all Lg.) 0.035" Hex L-Key (1 5/16" O'all Lg.) 0.050" Hex L-Key (1 11/16" O'all Lg.) 1/16" Hex L-Key (1 7/8" O'all Lg.) 1/4" Hex L-Key (3 9/16" O'all Lg.) 1/8" Hex L-Key (2 7/16" O'all Lg.) 3/16" Hex L-Key (3" O'all Lg.) 3/32" Hex L-Key (2 1/8" O'all Lg.) 3/8" Hex L-Key (4 11/16" O'all Lg.) 5/16" Hex L-Key (4 1/8" O'all Lg.) 5/32" Hex L-Key (2 11/16" O'all Lg.) 5/64" Hex L-Key (2 1/16" O'all Lg.) 7/32" Hex L-Key (3 1/4" O'all Lg.) 7/64" Hex L-Key (2 1/4" O'all Lg.) 9/64" Hex L-Key (2 5/8" O'all Lg.)	Black Phosphate-Coated Steel	Metal Case	7125A11	00000
			15	0.028" Hex L-Key (1 5/16" O'all Lg.) 0.035" Hex L-Key (1 5/16" O'all Lg.) 0.050" Hex L-Key (1 11/16" O'all Lg.) 1/16" Hex L-Key (1 7/8" O'all Lg.) 1/4" Hex L-Key (3 9/16" O'all Lg.) 1/8" Hex L-Key (2 7/16" O'all Lg.) 3/16" Hex L-Key (3" O'all Lg.) 3/32" Hex L-Key (2 1/8" O'all Lg.) 3/8" Hex L-Key (4 11/16" O'all Lg.) 5/16" Hex L-Key (4 1/8" O'all Lg.) 5/32" Hex L-Key (2 11/16" O'all Lg.) 5/64" Hex L-Key (2 1/16" O'all Lg.) 7/32" Hex L-Key (3 1/4" O'all Lg.) 7/64" Hex L-Key (2 1/4" O'all Lg.) 9/64" Hex L-Key (2 5/8" O'all Lg.)	Black Phosphate-Coated Steel	Plastic Pouch	7158A4	0000
			15	0.71 mm Hex L-Key (1 5/16" O'all Lg.) 0.89 mm Hex L-Key (1 5/16" O'all Lg.) 1.27 mm Hex L-Key (1 11/16" O'all Lg.) 1.5 mm Hex L-Key (1 13/16" O'all Lg.) 2 mm Hex L-Key (2 1/16" O'all Lg.) 2.5 mm Hex L-Key (2 1/4" O'all Lg.) 3 mm Hex L-Key (2 9/16" O'all Lg.) 4 mm Hex L-Key (2 15/16" O'all Lg.) 5 mm Hex L-Key (3 3/8" O'all Lg.) 6 mm Hex L-Key (3 3/4" O'all Lg.) 8 mm Hex L-Key (4 5/16" O'all Lg.) 10 mm Hex L-Key (4 3/4" O'all Lg.) 12 mm Hex L-Key (5 5/16" O'all Lg.) 14 mm Hex L-Key (6" O'all Lg.) 17 mm Hex L-Key (6 13/16" O'all Lg.)	Black Phosphate-Coated Steel	Metal Case	5388A34	00000
			18	0.028" Hex L-Key (1 5/16" O'all Lg.) 0.035" Hex L-Key (1 5/16" O'all Lg.) 0.050" Hex L-Key (1 11/16" O'all Lg.) 1/16" Hex L-Key (1 7/8" O'all Lg.) 1/2" Hex L-Key (5 13/16" O'all Lg.) 1/4" Hex L-Key (3 9/16" O'all Lg.) 1/8" Hex L-Key (2 7/16" O'all Lg.) 3/16" Hex L-Key (3" O'all Lg.) 3/32" Hex L-Key (2 1/8" O'all Lg.) 3/8" Hex L-Key (4 11/16" O'all Lg.) 5/16" Hex L-Key (4 1/8" O'all Lg.) 5/32" Hex L-Key (2 11/16" O'all Lg.) 5/64" Hex L-Key (2 1/16" O'all Lg.) 5/8" Hex L-Key (6 15/16" O'all Lg.) 7/32" Hex L-Key (3 1/4" O'all Lg.) 7/64" Hex L-Key (2 1/4" O'all Lg.) 9/16" Hex L-Key (6 3/8" O'all Lg.) 9/64" Hex L-Key (2 5/8" O'all Lg.)	Black Phosphate-Coated Steel	Metal Case	7125A14	00000
			20	0.028" Hex L-Key (1 5/16" O'all Lg.) 0.035" Hex L-Key (1 5/16" O'all Lg.) 0.050" Hex L-Key (1 11/16" O'all Lg.) 1/16" Hex L-Key (1 7/8" O'all Lg.) 1/2" Hex L-Key (5 13/16" O'all Lg.) 1/4" Hex L-Key (3 9/16" O'all Lg.) 1/8" Hex L-Key (2 7/16" O'all Lg.) 3/16" Hex L-Key (3" O'all Lg.) 3/32" Hex L-Key (2 1/8" O'all Lg.) 3/4" Hex L-Key (8" O'all Lg.) 3/8" Hex L-Key (4 11/16" O'all Lg.) 5/16" Hex L-Key (4 1/8" O'all Lg.) 5/32" Hex L-Key (2 11/16" O'all Lg.) 5/64" Hex L-Key (2 1/16" O'all Lg.) 5/8" Hex L-Key (6 15/16" O'all Lg.) 7/16" Hex L-Key (5 1/4" O'all Lg.) 7/32" Hex L-Key (3 1/4" O'all Lg.) 7/64" Hex L-Key (2 1/4" O'all Lg.) 9/16" Hex L-Key (6 3/8" O'all Lg.) 9/64" Hex L-Key (2 5/8" O'all Lg.)	Black Phosphate-Coated Steel	Plastic Roll-Up Pouch	7156A11	00000
			270	1/4" Hex L-Key (3 9/16" O'all Lg.)—25 ea. 1/8" Hex L-Key (2 7/16" O'all Lg.)—50 ea. 3/16" Hex L-Key (3" O'all Lg.)—25 ea. 3/32" Hex L-Key (2 1/8" O'all Lg.)—50 ea. 3/8" Hex L-Key (4 11/16" O'all Lg.)—10 ea. 5/16" Hex L-Key (4 1/8" O'all Lg.)—10 ea. 5/32" Hex L-Key (2 11/16" O'all Lg.)—25 ea. 5/64" Hex L-Key (2 1/16" O'all Lg.)—50 ea. 7/32" Hex L-Key (3 1/4" O'all Lg.)—25 ea.	Black Phosphate-Coated Steel	Compartmented Metal Box	7155A11	000000



					Long Length
					7	1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 5/16" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 6 mm Hex L-Key (5 11/16" O'all Lg.)	Black-Oxide Steel	Plastic Caddy	6956A42	0000
					7	1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	Black Phosphate-Coated Steel	Plastic Caddy	5812A44	0000
					9	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	Gold-Plated Steel	Plastic Caddy	6493A92	00000
					9	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	Black Phosphate-Coated Steel	Plastic Caddy	69485A21	00000
					9	1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	Blue-Painted Steel	Plastic Caddy	5789A15	00000
					10	1/16" Hex L-Key (3 1/8" O'all Lg.) 1/4" Hex L-Key (5 1/2" O'all Lg.) 1/8" Hex L-Key (3 7/8" O'all Lg.) 3/16" Hex L-Key (4 3/4" O'all Lg.) 3/32" Hex L-Key (3 1/2" O'all Lg.) 5/32" Hex L-Key (4 3/8" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 1/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 1/8" O'all Lg.)	Zinc-Flake-Coated Steel	Plastic Caddy	4891A18	00000
					11	1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 5/16" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 6 mm Hex L-Key (5 11/16" O'all Lg.) 7 mm Hex L-Key (6 9/16" O'all Lg.) 8 mm Hex L-Key (6 5/8" O'all Lg.) 9 mm Hex L-Key (7" O'all Lg.) 10 mm Hex L-Key (7 1/16" O'all Lg.)	Black-Oxide Steel	Plastic Ring	37355A21	00000
					12	1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.) 12 mm Hex L-Key (9 1/4" O'all Lg.) 14 mm Hex L-Key (11" O'all Lg.) 17 mm Hex L-Key (11 3/4" O'all Lg.)	Blue-Painted Steel	Plastic Pouch	5789A16	00000
					13	0.050" Hex L-Key (2 15/16" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 1/2" O'all Lg.) 1/8" Hex L-Key (3 7/8" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/8" Hex L-Key (7 1/8" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 5/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 11/16" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	Black-Oxide Steel	Plastic Caddy	5812A13	00000
					13	0.050" Hex L-Key (2 15/16" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 1/2" O'all Lg.) 1/8" Hex L-Key (3 7/8" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/8" Hex L-Key (7 1/8" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 5/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 11/16" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	Black-Oxide Steel	Plastic Ring	7279A28	00000
					13	0.050" Hex L-Key (2 15/16" O'all Lg.) 1/16" Hex L-Key (3 1/8" O'all Lg.) 1/4" Hex L-Key (5 1/2" O'all Lg.) 1/8" Hex L-Key (3 7/8" O'all Lg.) 3/16" Hex L-Key (4 3/4" O'all Lg.) 3/32" Hex L-Key (3 1/2" O'all Lg.) 3/8" Hex L-Key (7" O'all Lg.) 5/16" Hex L-Key (6 3/8" O'all Lg.) 5/32" Hex L-Key (4 3/8" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 1/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 1/8" O'all Lg.)	Zinc-Flake-Coated Steel	Plastic Caddy	4891A15	00000
					13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 9/16" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	Gold-Plated Steel	Plastic Caddy	6493A91	00000
					15	0.89 mm Hex L-Key (2 13/16" O'all Lg.) 1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.) 12 mm Hex L-Key (9 1/4" O'all Lg.) 14 mm Hex L-Key (10 3/4 O'all Lg.) 17 mm Hex L-Key (11 3/4" O'all Lg.) 19 mm Hex L-Key (12 1/2" O'all Lg.)	Black Phosphate-Coated Steel	Plastic Roll-Up Pouch	6956A24	00000
					15	0.89 mm Hex L-Key (2 3/4" O'all Lg.) 1.27 mm Hex L-Key (3" O'all Lg.) 1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.) 12 mm Hex L-Key (9 1/4" O'all Lg.) 14 mm Hex L-Key (11" O'all Lg.) 17 mm Hex L-Key (11 3/4" O'all Lg.) 19 mm Hex L-Key (12 1/2" O'all Lg.)	Blue-Painted Steel	Plastic Pouch	5789A24	000000
					15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/8" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 3/4" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 1/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 7/8" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	Black Phosphate-Coated Steel	Plastic Caddy	7158A7	00000
					15	1/2" Hex L-Key (9" O'all Lg.) 1/4" Hex L-Key (5 9/16" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/4" Hex L-Key (12" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 5/8" Hex L-Key (10 1/2" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/16" Hex L-Key (9 1/2" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	Black Phosphate-Coated Steel	Plastic Roll-Up Pouch	7158A2	00000

					Tamper-Resistant Hex





									Long Length
									4	1/8" Tamper-Resistant Hex L-Key (2 3/8" O'all Lg.) 3/16" Tamper-Resistant Hex L-Key (2 11/16" O'all Lg.) 5/32" Tamper-Resistant Hex L-Key (2 7/16" O'all Lg.) 7/32" Tamper-Resistant Hex L-Key (3 1/4" O'all Lg.)	Steel	Plastic Pouch	7390A45	00000
									6	2.5 mm Tamper-Resistant Hex L-Key (3 5/8" O'all Lg.) 3 mm Tamper-Resistant Hex L-Key (4 1/8" O'all Lg.) 4 mm Tamper-Resistant Hex L-Key (4 1/2" O'all Lg.) 5 mm Tamper-Resistant Hex L-Key (5" O'all Lg.) 6 mm Tamper-Resistant Hex L-Key (5 3/4" O'all Lg.) 8 mm Tamper-Resistant Hex L-Key (6 3/8" O'all Lg.)	Black Phosphate-Coated Steel	Plastic Pouch	7390A57	00000

									Torx





													Short Length
													7	T10 Torx L-Key (2 1/8" O'all Lg.) T15 Torx L-Key (2 5/16" O'all Lg.) T20 Torx L-Key (2 7/16" O'all Lg.) T25 Torx L-Key (2 9/16" O'all Lg.) T27 Torx L-Key (2 3/4" O'all Lg.) T30 Torx L-Key (3" O'all Lg.) T40 Torx L-Key (3 1/4" O'all Lg.)	Black-Oxide Steel	Plastic Caddy	6959A54	00000
													14	T6 Torx L-Key (1 3/4" O'all Lg.) T7 Torx L-Key (1 13/16" O'all Lg.) T8 Torx L-Key (1 15/16" O'all Lg.) T9 Torx L-Key (2 1/16" O'all Lg.) T10 Torx L-Key (2 1/8" O'all Lg.) T15 Torx L-Key (2 5/16" O'all Lg.) T20 Torx L-Key (2 7/16" O'all Lg.) T25 Torx L-Key (2 9/16" O'all Lg.) T27 Torx L-Key (2 3/4" O'all Lg.) T30 Torx L-Key (3" O'all Lg.) T40 Torx L-Key (3 1/4" O'all Lg.) T45 Torx L-Key (3 9/16" O'all Lg.) T50 Torx L-Key (4 1/16" O'all Lg.) T55 Torx L-Key (4 11/16" O'all Lg.)	Black-Oxide Steel	Metal Case	6959A84	00000
													14	T6 Torx L-Key (1 3/4" O'all Lg.) T7 Torx L-Key (1 13/16" O'all Lg.) T8 Torx L-Key (1 15/16" O'all Lg.) T9 Torx L-Key (2 1/16" O'all Lg.) T10 Torx L-Key (2 1/8" O'all Lg.) T15 Torx L-Key (2 5/16" O'all Lg.) T20 Torx L-Key (2 7/16" O'all Lg.) T25 Torx L-Key (2 9/16" O'all Lg.) T27 Torx L-Key (2 3/4" O'all Lg.) T30 Torx L-Key (3" O'all Lg.) T40 Torx L-Key (3 1/4" O'all Lg.) T45 Torx L-Key (3 9/16" O'all Lg.) T50 Torx L-Key (4 1/16" O'all Lg.) T55 Torx L-Key (4 11/16" O'all Lg.)	Black-Oxide Steel	Plastic Pouch	6959A62	00000



	Long Length
	7												T10 Torx L-Key (3 1/2" O'all Lg.) T15 Torx L-Key (3 3/4" O'all Lg.) T20 Torx L-Key (4" O'all Lg.) T25 Torx L-Key (4 1/8" O'all Lg.) T27 Torx L-Key (4 3/8" O'all Lg.) T30 Torx L-Key (4 3/4" O'all Lg.) T40 Torx L-Key (5 3/16" O'all Lg.)	Black-Oxide Steel	Plastic Caddy	6959A58	00000
	8	T6 Torx L-Key (2 1/4" O'all Lg.) T7 Torx L-Key (2 9/16" O'all Lg.) T8 Torx L-Key (2 3/4" O'all Lg.) T9 Torx L-Key (3 1/16" O'all Lg.) T10 Torx L-Key (3 3/8" O'all Lg.) T15 Torx L-Key (3 1/2" O'all Lg.) T20 Torx L-Key (3 13/16" O'all Lg.) T25 Torx L-Key (4" O'all Lg.)											Gold-Plated Steel	Plastic Caddy	6370A1	00000
	8	T9 Torx L-Key (3 1/16" O'all Lg.) T10 Torx L-Key (3 3/8" O'all Lg.) T15 Torx L-Key (3 1/2" O'all Lg.) T20 Torx L-Key (3 13/16" O'all Lg.) T25 Torx L-Key (4" O'all Lg.) T27 Torx L-Key (4 1/2" O'all Lg.) T30 Torx L-Key (4 7/8" O'all Lg.) T40 Torx L-Key (5 1/4" O'all Lg.)											Gold-Plated Steel	Plastic Caddy	6370A2	00000
	14	T6 Torx L-Key (3 1/16" O'all Lg.) T7 Torx L-Key (3 3/16" O'all Lg.) T8 Torx L-Key (3 1/4" O'all Lg.) T9 Torx L-Key (3 3/8" O'all Lg.) T10 Torx L-Key (3 1/2" O'all Lg.) T15 Torx L-Key (3 3/4" O'all Lg.) T20 Torx L-Key (4" O'all Lg.) T25 Torx L-Key (4 1/8" O'all Lg.) T27 Torx L-Key (4 3/8" O'all Lg.) T30 Torx L-Key (4 3/4" O'all Lg.) T40 Torx L-Key (5 3/16" O'all Lg.) T45 Torx L-Key (5 9/16" O'all Lg.) T50 Torx L-Key (6 5/16" O'all Lg.) T55 Torx L-Key (7 3/16" O'all Lg.)											Black-Oxide Steel	Metal Case	6959A85	00000
	14	T6 Torx L-Key (3 1/16" O'all Lg.) T7 Torx L-Key (3 3/16" O'all Lg.) T8 Torx L-Key (3 1/4" O'all Lg.) T9 Torx L-Key (3 3/8" O'all Lg.) T10 Torx L-Key (3 1/2" O'all Lg.) T15 Torx L-Key (3 3/4" O'all Lg.) T20 Torx L-Key (4" O'all Lg.) T25 Torx L-Key (4 1/8" O'all Lg.) T27 Torx L-Key (4 3/8" O'all Lg.) T30 Torx L-Key (4 3/4" O'all Lg.) T40 Torx L-Key (5 3/16" O'all Lg.) T45 Torx L-Key (5 9/16" O'all Lg.) T50 Torx L-Key (6 5/16" O'all Lg.) T55 Torx L-Key (7 3/16" O'all Lg.)											Black-Oxide Steel	Plastic Pouch	6959A63	00000

	Tamper-Resistant Torx





															Short Length
															6	T10 Tamper-Resistant Torx L-Key (2 3/16" O'all Lg.) T15 Tamper-Resistant Torx L-Key (2 1/4" O'all Lg.) T20 Tamper-Resistant Torx L-Key (2 1/2" O'all Lg.) T25 Tamper-Resistant Torx L-Key (2 11/16" O'all Lg.) T27 Tamper-Resistant Torx L-Key (2 7/8" O'all Lg.) T30 Tamper-Resistant Torx L-Key (3 1/8" O'all Lg.)	Black-Oxide Steel	Plastic Bag	55525A41	00000
															8	T6 Tamper-Resistant Torx L-Key (3 1/16" O'all Lg.) T7 Tamper-Resistant Torx L-Key (3 1/8" O'all Lg.) T8 Tamper-Resistant Torx L-Key (3 1/4" O'all Lg.) T9 Tamper-Resistant Torx L-Key (3 3/8" O'all Lg.) T10 Tamper-Resistant Torx L-Key (3 1/2" O'all Lg.) T15 Tamper-Resistant Torx L-Key (3 11/16" O'all Lg.) T20 Tamper-Resistant Torx L-Key (3 15/16" O'all Lg.) T25 Tamper-Resistant Torx L-Key (4 1/8" O'all Lg.)	Black-Oxide Steel	Plastic Pouch	55525A42	00000

															Torx Plus





			Short Length
			9																IP8 Torx Plus L-Key (3 1/16" O'all Lg.) IP9 Torx Plus L-Key (3 1/4" O'all Lg.) IP10 Torx Plus L-Key (3 1/2" O'all Lg.) IP15 Torx Plus L-Key (3 3/4" O'all Lg.) IP20 Torx Plus L-Key (3 15/16" O'all Lg.) IP25 Torx Plus L-Key (4 3/16" O'all Lg.) IP27 Torx Plus L-Key (4 1/2" O'all Lg.) IP30 Torx Plus L-Key (4 13/16" O'all Lg.) IP40 Torx Plus L-Key (5 3/16" O'all Lg.)	Black-Oxide Steel	Plastic Caddy	3726A36	00000

			4-Flute Spline and 6-Flute Spline





																					Short Length
																					9	0.033" 4-Flute Spline L-Key (1 5/16" O'all Lg.) 0.048" 4-Flute Spline L-Key (1 5/16" O'all Lg.) 0.048" 6-Flute Spline L-Key (1 5/16" O'all Lg.) 0.060" 6-Flute Spline L-Key (1 3/4" O'all Lg.) 0.069" 4-Flute Spline L-Key (1 7/8" O'all Lg.) 0.072" 6-Flute Spline L-Key (1 13/16" O'all Lg.) 0.076" 4-Flute Spline L-Key (1 7/8" O'all Lg.) 0.096" 6-Flute Spline L-Key (2" O'all Lg.) 0.111" 6-Flute Spline L-Key (2 1/8" O'all Lg.)	Black-Oxide Steel	Plastic Pouch	7048A54	00000
																					10	0.060" 6-Flute Spline L-Key (1 3/4" O'all Lg.) 0.069" 4-Flute Spline L-Key (1 7/8" O'all Lg.) 0.072" 6-Flute Spline L-Key (1 7/8" O'all Lg.) 0.076" 4-Flute Spline L-Key (1 7/8" O'all Lg.) 0.096" 6-Flute Spline L-Key (2" O'all Lg.) 0.111" 6-Flute Spline L-Key (2 1/8" O'all Lg.) 0.133" 6-Flute Spline L-Key (2 5/16" O'all Lg.) 0.145" 6-Flute Spline L-Key (2 7/16" O'all Lg.) 0.168" 6-Flute Spline L-Key (2 9/16" O'all Lg.) 0.183" 6-Flute Spline L-Key (2 11/16" O'all Lg.)	Black-Oxide Steel	Plastic Pouch	7048A55	00000

																					6-Flute Spline





																									Long Length
																									7	0.096" 6-Flute Spline L-Key (3 1/4" O'all Lg.) 0.111" 6-Flute Spline L-Key (3 1/2" O'all Lg.) 0.133" 6-Flute Spline L-Key (3 3/4" O'all Lg.) 0.145" 6-Flute Spline L-Key (3 15/16" O'all Lg.) 0.168" 6-Flute Spline L-Key (4 1/8" O'all Lg.) 0.183" 6-Flute Spline L-Key (4 5/16" O'all Lg.) 0.216" 6-Flute Spline L-Key (4 11/16" O'all Lg.)	Black-Oxide Steel	Plastic Pouch	7048A56	00000

Easy-Align Ball-Tip L-Key Sets


Canvas Pouch	With Plastic Compartmented Box	Metal Case

Plastic Caddy	Plastic Roll-Up Pouch	Rubber Caddy

Turn screws at an angle when you can't access them head on. These L-key sets have a ball tip on the long leg that engages the drive with less contact than a straight tip. Ball tips are handy for corners and tightly-packed areas, such as control panels and junction boxes. However, they don't grip as tightly as straight tips, and may strip threads if you crank them too hard. These L-keys are precision manufactured to tight tolerances. Made from high-quality hardened steel, they'll last a lifetime in your tool kit.

Black-Oxide Steel—Offer slightly better corrosion resistance than plain steel L-keys to stand up to occasional moisture.

	Material	Container Type		Each
Hex





	Long Length
	6	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A44	00000
	7	1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A51	0000
	8	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A16	0000
	9	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	25°	Gold-Plated Steel	Plastic Caddy	7813A13	00000
	9	1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A18	00000
	9	1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	25°	Blue-Painted Steel	Plastic Caddy	5786A2	00000
	10	1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A28	00000
	10	1/16" Hex L-Key (3 9/16" O'all Lg.) 1/4" Hex L-Key (6 3/4" O'all Lg.) 1/8" Hex L-Key (4 9/16" O'all Lg.) 3/16" Hex L-Key (5 1/2" O'all Lg.) 3/32" Hex L-Key (4 1/16" O'all Lg.) 5/32" Hex L-Key (5 1/16" O'all Lg.) 5/64" Hex L-Key (3 13/16" O'all Lg.) 7/32" Hex L-Key (5 5/16" O'all Lg.) 7/64" Hex L-Key (4 5/16" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	20°	Zinc-Flake-Coated Steel	Plastic Caddy	5888A36	00000
	12	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 13/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Gold-Plated Steel	Plastic Caddy	7813A11	00000
	13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 13/16" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Gold-Plated Steel	Plastic Caddy	7813A12	00000
	13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Metal Case	5709A14	00000
	13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A52	00000
	13	0.050" Hex L-Key (3 3/8" O'all Lg.) 1/16" Hex L-Key (3 9/16" O'all Lg.) 1/4" Hex L-Key (6 3/4" O'all Lg.) 1/8" Hex L-Key (4 9/16" O'all Lg.) 3/16" Hex L-Key (5 1/2" O'all Lg.) 3/32" Hex L-Key (4 1/16" O'all Lg.) 3/8" Hex L-Key (8 1/4" O'all Lg.) 5/16" Hex L-Key (7 1/4" O'all Lg.) 5/32" Hex L-Key (5 1/16" O'all Lg.) 5/64" Hex L-Key (3 13/16" O'all Lg.) 7/32" Hex L-Key (5 15/16" O'all Lg.) 7/64" Hex L-Key (4 5/16" O'all Lg.) 9/64" Hex L-Key (4 13/16" O'all Lg.)	20°	Zinc-Flake-Coated Steel	Plastic Caddy	5888A38	00000
	13	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.) 12 mm Hex L-Key (9 1/4" O'all Lg.) 14 mm Hex L-Key (10 3/4 O'all Lg.) 17 mm Hex L-Key (11 3/4" O'all Lg.)	25°	Black Phosphate-Coated Steel	Metal Case	5709A22	00000
	15	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/16" O'all Lg.) 1/2" Hex L-Key (8 3/4" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 15/16" O'all Lg.) 3/16" Hex L-Key (4 11/16" O'all Lg.) 3/32" Hex L-Key (3 9/16" O'all Lg.) 3/8" Hex L-Key (7 3/16" O'all Lg.) 5/16" Hex L-Key (6 5/16" O'all Lg.) 5/32" Hex L-Key (4 7/16" O'all Lg.) 5/64" Hex L-Key (3 3/8" O'all Lg.) 7/16" Hex L-Key (7 15/16" O'all Lg.) 7/32" Hex L-Key (5 3/16" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Roll-Up Pouch	5709A15	00000
	15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 3/4" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 5.5 mm Hex L-Key (5 1/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 7/8" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	25°	Blue-Painted Steel	Plastic Caddy	5786A1	00000
	15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 11/16" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 3/16" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 13/16" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	25°	Gold-Plated Steel	Plastic Caddy	7813A15	00000
	15	1.27 mm Hex L-Key (2 7/8" O'all Lg.) 1.5 mm Hex L-Key (3 1/16" O'all Lg.) 2 mm Hex L-Key (3 3/8" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4 1/16" O'all Lg.) 3.5 mm Hex L-Key (4 1/8" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 4.5 mm Hex L-Key (4 11/16" O'all Lg.) 5 mm Hex L-Key (5" O'all Lg.) 5.5 mm Hex L-Key (5 3/16" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 7 mm Hex L-Key (5 13/16" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 9 mm Hex L-Key (6 5/8" O'all Lg.) 10 mm Hex L-Key (7 3/16" O'all Lg.)	25°	Black Phosphate-Coated Steel	Plastic Caddy	5709A45	00000
	200	0.050" Hex L-Key (2 15/16" O'all Lg.)—10 ea. 1.5 mm Hex L-Key (3 1/8" O'all Lg.)—10 ea. 1/16" Hex L-Key (3 1/16" O'all Lg.)—10 ea. 1/4" Hex L-Key (5 1/2" O'all Lg.)—10 ea. 1/8" Hex L-Key (3 15/16" O'all Lg.)—10 ea. 2 mm Hex L-Key (3 5/16" O'all Lg.)—10 ea. 2.5 mm Hex L-Key (3 5/8" O'all Lg.)—10 ea. 3 mm Hex L-Key (4" O'all Lg.)—10 ea. 3/16" Hex L-Key (4 3/4" O'all Lg.)—10 ea. 3/32" Hex L-Key (3 1/2" O'all Lg.)—10 ea. 3/8" Hex L-Key (7 3/16" O'all Lg.)—5 ea. 4 mm Hex L-Key (4 1/4" O'all Lg.)—10 ea. 5 mm Hex L-Key (4 13/16" O'all Lg.)—10 ea. 5/16" Hex L-Key (6 5/16" O'all Lg.)—5 ea. 5/32" Hex L-Key (4 5/16" O'all Lg.)—10 ea. 5/64" Hex L-Key (3 5/16" O'all Lg.)—10 ea. 6 mm Hex L-Key (5 11/16" O'all Lg.)—10 ea. 7/32" Hex L-Key (5 1/8" O'all Lg.)—10 ea. 7/64" Hex L-Key (3 11/16" O'all Lg.)—10 ea. 8 mm Hex L-Key (6 9/16 O'all Lg.)—5 ea. 9/64" Hex L-Key (4 1/8" O'all Lg.)—10 ea. 10 mm Hex L-Key (7" O'all Lg.)—5 ea.	20°	Black-Oxide Steel	Compartmented Plastic Box	6083A7	000000



			Extra-Long Length
			9	1.5 mm Hex L-Key (3 9/16" O'all Lg.) 2 mm Hex L-Key (4 1/8" O'all Lg.) 2.5 mm Hex L-Key (4 9/16" O'all Lg.) 3 mm Hex L-Key (5 1/8" O'all Lg.) 4 mm Hex L-Key (5 11/16" O'all Lg.) 5 mm Hex L-Key (6 9/16" O'all Lg.) 6 mm Hex L-Key (7 5/16" O'all Lg.) 8 mm Hex L-Key (8 1/2" O'all Lg.) 10 mm Hex L-Key (9 1/4" O'all Lg.)	20°	Black-Oxide Steel	Rubber Caddy	57185A33	00000
			9	1.5 mm Hex L-Key (3 9/16" O'all Lg.) 2 mm Hex L-Key (4 1/8" O'all Lg.) 2.5 mm Hex L-Key (4 9/16" O'all Lg.) 3 mm Hex L-Key (5" O'all Lg.) 4 mm Hex L-Key (5 11/16" O'all Lg.) 5 mm Hex L-Key (6 5/16" O'all Lg.) 6 mm Hex L-Key (7" O'all Lg.) 8 mm Hex L-Key (8" O'all Lg.) 10 mm Hex L-Key (9 1/2" O'all Lg.)	20°	Stainless Steel	Rubber Caddy	5020A52	00000
			9	1/4" Hex L-Key (7 1/2" O'all Lg.) 1/8" Hex L-Key (5" O'all Lg.) 3/16" Hex L-Key (6 1/4" O'all Lg.) 3/32" Hex L-Key (5 1/16" O'all Lg.) 3/8" Hex L-Key (9 1/2" O'all Lg.) 5/16" Hex L-Key (8" O'all Lg.) 5/32" Hex L-Key (5 9/16" O'all Lg.) 7/64" Hex L-Key (4 7/8" O'all Lg.) 9/64" Hex L-Key (5 3/8" O'all Lg.)	20°	Stainless Steel	Canvas Pouch	5020A53	00000
			13	0.050" Hex L-Key (3 5/16" O'all Lg.) 1/16" Hex L-Key (3 9/16" O'all Lg.) 1/4" Hex L-Key (7 3/4" O'all Lg.) 1/8" Hex L-Key (5 1/8" O'all Lg.) 3/16" Hex L-Key (6 1/2" O'all Lg.) 3/32" Hex L-Key (4 9/16" O'all Lg.) 3/8" Hex L-Key (8 3/4" O'all Lg.) 5/16" Hex L-Key (8 1/4" O'all Lg.) 5/32" Hex L-Key (5 11/16" O'all Lg.) 5/64" Hex L-Key (4 1/8" O'all Lg.) 7/32" Hex L-Key (7 5/16" O'all Lg.) 7/64" Hex L-Key (4 7/8" O'all Lg.) 9/64" Hex L-Key (5 3/8" O'all Lg.)	20°	Black-Oxide Steel	Rubber Caddy	57185A61	00000

			Torx





							Long Length
							8	T9 Torx L-Key (3" O'all Lg.) T10 Torx L-Key (3 5/16" O'all Lg.) T15 Torx L-Key (3 7/16" O'all Lg.) T20 Torx L-Key (3 3/16" O'all Lg.) T25 Torx L-Key (4" O'all Lg.) T27 Torx L-Key (4 7/16" O'all Lg.) T30 Torx L-Key (4 7/8" O'all Lg.) T40 Torx L-Key (5 3/16" O'all Lg.)	20°	Black Phosphate-Coated Steel	Plastic Caddy	54575A44	00000

Stubby Easy-Align Ball-Tip L-Keys

Single Ball

Double Ball

Image of Attribute. Front orientation. Contains Annotated, Border. Stubby Easy-Align Ball-Tip L-Keys.

With a stubby leg that's up to 50% shorter than others, these L-keys squeeze into spots with low overhead clearance, such as engine compartments. A ball tip on one or both ends engages the drive with less contact than a straight tip, so you can turn screws at an angle instead of head on. Ball tips don't grip as tightly as straight tips, however, and may strip threads if you crank them too hard.

Chrome-Plated Steel—The chrome plating resists salt water and chemicals better than gold and black phosphate and is less likely to wear off. These L-keys have the brightest, shiniest finish we offer to stand out in your tool box.

		Length			Maximum Access Angle		Single Ball		Double Ball
	Drive Size	Overall	Long Leg	Short Leg	Long Leg	Short Leg		Each		Each
Hex





				Black Phosphate-Coated Steel
				0.050"	2 7/8"	2 13/16"	1/8"	25°	—	7139N11	00000	———	0
				0.050"	3 3/16"	3 1/8"	1/4"	25°	15°	———	0	7139N36	00000
				1/16"	3 1/16"	3"	3/16"	25°	—	7139N12	0000	———	0
				1/16"	3 3/8"	3 5/16"	1/4"	25°	15°	———	0	7139N37	0000
				5/64"	3 1/4"	3 3/16"	1/4"	25°	—	7139N13	0000	———	0
				5/64"	3 11/16"	3 5/8"	5/16"	25°	15°	———	0	7139N38	0000
				3/32"	3 1/2"	3 3/8"	5/16"	25°	—	7139N14	0000	———	0
				3/32"	4"	3 7/8"	3/8"	25°	15°	———	0	7139N39	0000
				7/64"	3 11/16"	3 5/8"	5/16"	25°	—	7139N15	0000	———	0
				7/64"	4 3/16"	4 1/8"	3/8"	25°	15°	———	0	7139N41	0000
				1/8"	3 15/16"	3 13/16"	5/16"	25°	—	7139N16	0000	———	0
				1/8"	4 1/2"	4 3/8"	3/8"	25°	15°	———	0	7139N42	0000
				9/64"	4 1/8"	4"	5/16"	25°	—	7139N17	0000	———	0
				9/64"	4 15/16"	4 13/16"	3/8"	25°	15°	———	0	7139N43	0000
				5/32"	4 3/8"	4 3/16"	3/8"	25°	—	7139N18	0000	———	0
				5/32"	5 1/4"	5 1/8"	3/8"	25°	15°	———	0	7139N44	0000
				3/16"	4 11/16"	4 1/2"	3/8"	25°	—	7139N19	0000	———	0
				3/16"	5 1/2"	5 5/16"	7/16"	25°	15°	———	0	7139N45	0000
				7/32"	5 1/8"	4 7/8"	7/16"	25°	—	7139N21	0000	———	0
				7/32"	5 15/16"	5 11/16"	1/2"	25°	15°	———	0	7139N46	0000
				1/4"	5 7/8"	5 5/8"	7/16"	25°	—	7139N22	0000	———	0
				1/4"	6 3/4"	6 1/2"	1/2"	25°	15°	———	0	7139N47	0000
				5/16"	6 5/16"	6"	9/16"	25°	—	7139N23	0000	———	0
				5/16"	7 7/16"	7 1/8"	5/8"	25°	15°	———	0	7139N48	0000
				3/8"	7 3/16"	6 13/16"	11/16"	25°	—	7139N24	0000	———	0
				3/8"	8 3/16"	7 13/16"	13/16"	25°	15°	———	0	7139N49	0000
				1.27 mm	2 7/8"	2 13/16"	1/8"	25°	—	7139N25	0000	———	0
				1.5 mm	3 1/16"	3"	3/16"	25°	—	7139N26	0000	———	0
				1.5 mm	3 9/16"	3 1/2"	1/4"	25°	15°	———	0	7139N51	0000
				2 mm	3 1/4"	3 3/16"	1/4"	25°	—	7139N27	0000	———	0
				2 mm	4"	3 7/8"	5/16"	25°	15°	———	0	7139N52	0000
				2.5 mm	3 5/8"	3 1/2"	1/4"	25°	—	7139N28	0000	———	0
				2.5 mm	4 1/2"	4 3/8"	3/8"	25°	15°	———	0	7139N53	0000
				3 mm	4"	3 7/8"	5/16"	25°	—	7139N29	0000	———	0
				3 mm	5"	4 7/8"	3/8"	25°	15°	———	0	7139N54	0000
				4 mm	4 7/16"	4 5/16"	3/8"	25°	—	7139N31	0000	———	0
				4 mm	5 3/4"	5 5/8"	3/8"	25°	15°	———	0	7139N55	0000
				5 mm	4 7/8"	4 11/16"	3/8"	25°	—	7139N32	0000	———	0
				5 mm	6 5/8"	6 3/8"	7/16"	25°	15°	———	0	7139N56	0000
				6 mm	5 3/4"	5 1/2"	1/2"	25°	—	7139N33	0000	———	0
				6 mm	7 1/16"	6 13/16"	1/2"	25°	15°	———	0	7139N57	0000
				8 mm	6 5/16"	6"	9/16"	25°	—	7139N34	0000	———	0
				8 mm	8"	7 11/16"	5/8"	25°	15°	———	0	7139N58	0000
				10 mm	7 1/16"	6 11/16"	3/4"	25°	—	7139N35	0000	———	0
				10 mm	8 13/16"	8 3/8"	13/16"	25°	15°	———	0	7139N59	0000



						Chrome-Plated Steel
						0.050"	2 7/8"	2 13/16"	1/8"	25°	—	7134N111	0000	———	0
						0.050"	3 3/16"	3 1/8"	1/4"	25°	15°	———	0	7134N136	0000
						1/16"	3 1/16"	3"	3/16"	25°	—	7134N112	0000	———	0
						1/16"	3 3/8"	3 5/16"	1/4"	25°	15°	———	0	7134N137	0000
						5/64"	3 1/4"	3 3/16"	1/4"	25°	—	7134N113	0000	———	0
						5/64"	3 11/16"	3 5/8"	5/16"	25°	15°	———	0	7134N138	0000
						3/32"	3 1/2"	3 3/8"	5/16"	25°	—	7134N114	0000	———	0
						3/32"	3 15/16"	3 7/8"	3/8"	25°	15°	———	0	7134N139	0000
						7/64"	3 11/16"	3 5/8"	5/16"	25°	—	7134N115	0000	———	0
7/64"						4 3/16"	4 1/8"	3/8"	25°	15°	———	0	7134N141	0000
1/8"	3 7/8"					3 13/16"	5/16"	25°	—	7134N116	0000	———	0
1/8"	4 1/2"					4 3/8"	3/8"	25°	15°	———	0	7134N142	0000
9/64"	4 1/8"	4"				5/16"	25°	—	7134N117	0000	———	0
9/64"	4 15/16"	4 13/16"	3/8"			25°	15°	———	0	7134N143	0000
5/32"	4 3/8"	4 3/16"	3/8"			25°	—	7134N118	0000	———	0
5/32"	5 5/16"	5 1/8"	3/8"			25°	15°	———	0	7134N144	0000
3/16"	4 11/16"	4 1/2"	3/8"			25°	—	7134N119	0000	———	0
3/16"	5 7/16"	5 5/16"	7/16"			25°	15°	———	0	7134N145	0000
7/32"	5 1/8"	4 7/8"	7/16"			25°	—	7134N121	0000	———	0
7/32"	5 15/16"	5 11/16"	1/2"			25°	15°	———	0	7134N146	0000
1/4"	5 13/16"	5 5/8"	7/16"			25°	—	7134N122	0000	———	0
1/4"	6 3/4"	6 1/2"	1/2"			25°	15°	———	0	7134N147	0000
5/16"	6 5/16"	6"	9/16"			25°	—	7134N123	0000	———	0
5/16"	7 3/8"	7 1/8"	5/8"			25°	15°	———	0	7134N148	0000
3/8"	7 1/8"	6 13/16"	11/16"			25°	—	7134N124	0000	———	0
3/8"	8 3/16"	7 13/16"	13/16"			25°	15°	———	0	7134N149	0000
1.27 mm	2 7/8"	2 11/16"	1/8"			25°	—	7134N125	0000	———	0
1.5 mm	3 9/16"	3 1/2"	1/4"			25°	15°	———	0	7134N151	0000
1.5 mm	3 5/8"	3 1/2"	3/16"			25°	—	7134N126	0000	———	0
2 mm	4"	3 7/8"	1/4"			25°	—	7134N127	0000	———	0
2 mm	4"	3 7/8"	5/16"			25°	15°	———	0	7134N152	0000
2.5 mm	4 7/16"	4 3/8"	5/16"			25°	15°	———	0	7134N153	0000
2.5 mm	4 1/2"	4 3/8"	1/4"			25°	—	7134N128	0000	———	0
3 mm	4 1/8"	5"	5/16"			25°	—	7134N129	0000	———	0
3 mm	5"	4 7/8"	3/8"			25°	15°	———	0	7134N154	0000
4 mm	5 3/4"	5 5/8"	5/16"			25°	—	7134N131	0000	———	0
4 mm	5 3/4"	5 5/8"	3/8"			25°	15°	———	0	7134N155	0000
5 mm	6 1/2"	6 5/16"	3/8"			25°	—	7134N132	0000	———	0
5 mm	6 1/2"	6 3/8"	7/16"			25°	15°	———	0	7134N156	0000
6 mm	7"	6 13/16"	7/16"			25°	—	7134N133	0000	———	0
6 mm	7"	6 13/16"	1/2"			25°	15°	———	0	7134N157	0000
8 mm	8"	7 11/16"	9/16"			25°	—	7134N134	0000	———	0
8 mm	8"	7 11/16"	5/8"			25°	15°	———	0	7134N158	0000
10 mm	8 3/4"	8 3/8"	3/4"			25°	—	7134N135	0000	———	0
10 mm	8 13/16"	8 3/8"	13/16"			25°	15°	———	0	7134N159	00000

Color-Coded Easy-Align Ball-Tip L-Key Sets

Each color corresponds to a specific drive size, so you can grab the key you need and get cranking. A ball tip on the long leg engages the drive with less contact than a straight tip to turn screws at an angle instead of head on. Ball tips are handy for corners and tightly-packed areas, however, they don't grip as tightly as straight tips and may strip threads if you crank them too hard.

	Material	Container Type		Each
Hex





	Extra-Long Length
	9	1.5 mm Yellow Hex L-Key (3 5/8" O'all Lg.) 2 mm Black Hex L-Key (4" O'all Lg.) 2.5 mm Orange Hex L-Key (4 1/2 O'all Lg.) 3 mm Pink Hex L-Key (5 1/8" O'all Lg.) 4 mm Red Hex L-Key (5 3/4" O'all Lg.) 5 mm Blue Hex L-Key (6 1/2" O'all Lg.) 6 mm Green Hex L-Key (7 1/8" O'all Lg.) 8 mm Brown Hex L-Key (8 1/4" O'all Lg.) 10 mm Dark Blue Hex L-Key (9" O'all Lg.)	25°	Painted Steel	Plastic Caddy	2617N35	000000
	13	0.050" Red Hex L-Key (2 7/8" O'all Lg.) 1/16" Yellow Hex L-Key (3 1/8" O'all Lg.) 1/4" Green Hex L-Key (5 7/8" O'all Lg.) 1/8" Pink Hex L-Key (4" O'all Lg.) 3/16" Blue Hex L-Key (4 3/4" O'all Lg.) 3/32" Dark Green Hex L-Key (3 1/2" O'all Lg.) 3/8" Dark Blue Hex L-Key (7 1/4" O'all Lg.) 5/16" Brown Hex L-Key (6 3/8" O'all Lg.) 5/32" Red Hex L-Key (4 3/8" O'all Lg.) 5/64" Black Hex L-Key (3 3/8" O'all Lg.) 7/32" Dark Yellow Hex L-Key (5 1/8" O'all Lg.) 7/64" Orange Hex L-Key (3 3/4" O'all Lg.) 9/64" Dark Blue Hex L-Key (4 1/4" O'all Lg.)	25°	Painted Steel	Plastic Caddy	2617N36	00000

Stubby Easy-Align Ball-Tip L-Key Sets

Fasten a variety of screw sizes in compact machinery where overhead clearance is minimal. These L-keys have a stubby leg that's up to 50% shorter than others to squeeze into extremely tight spaces. They also have a ball tip on one or both ends that engages the drive with less contact than a straight tip, so you can turn screws at an angle instead of head on. Ball tips don't grip as tightly as straight tips, however, and may strip threads if you crank them too hard.

			Maximum Access Angle
	Drive Size	Overall Lg.	Long Leg	Short Leg	Material	Container Type		Each
Hex





				Long Length
				0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"	2 7/8" to 7 3/16"	25°	—	Black Phosphate-Coated Steel	Plastic Caddy	6112A31	000000
				0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"	2 7/8" to 7 3/16"	25°	—	Chrome-Plated Steel	Plastic Caddy	90422A120	00000
				1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"	3 1/16" to 5 7/8"	25°	—	Black Phosphate-Coated Steel	Plastic Caddy	6112A11	00000
				1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"	3 1/16" to 5 7/8"	25°	—	Chrome-Plated Steel	Plastic Caddy	90422A110	00000
				1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm	3 1/16" to 5 3/4"	25°	—	Black Phosphate-Coated Steel	Plastic Caddy	6112A21	00000
				1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm	3 1/16" to 7 1/8"	25°	—	Black Phosphate-Coated Steel	Plastic Caddy	6112A32	00000



						Extra-Long Length
						1.5 mm, 2 mm, 3 mm, 4 mm, 5 mm, 6 mm	3 1/16" to 5 3/4"	25°	—	Chrome-Plated Steel	Plastic Caddy	90422A130	00000
						1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm	3 1/16" to 7 3/16"	25°	—	Chrome-Plated Steel	Plastic Caddy	90422A140	00000



								Extra-Long Length with Double Ball
								0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"	2 7/8" to 7 1/4"	25°	15°	Chrome-Plated Steel	Plastic Caddy	90422A150	00000
								0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"	3 1/4" to 8 1/4"	25°	15°	Black Phosphate-Coated Steel	Plastic Caddy	6112A12	00000
								1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm	3 5/8" to 9"	25°	15°	Black Phosphate-Coated Steel	Plastic Caddy	6112A22	00000
								1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm	3 5/8" to 9"	25°	15°	Chrome-Plated Steel	Plastic Caddy	90422A160	00000

Nonmagnetic L-Keys

Fasten screws in everything from MRI machines to semiconductor equipment without worrying about magnetic interference. These L-keys are made from nonmagnetic titanium, so they won't damage electrical components or attract loose metal parts and shavings in your toolbox. With the best strength-to-weight ratio of all our L-keys, they're as strong as steel to resist bending under high torque and weigh up to 50% less.

		Length
	Drive Size	Overall	Long Leg	Short Leg		Each
Hex





				Titanium
				0.050"	1 15/16"	1 7/8"	5/8"	53945A21	000000
				1/16"	2 1/16"	2"	3/4"	53945A22	00000
				5/64"	2 3/16"	2 1/16"	13/16"	53945A23	00000
				3/32"	2 3/8"	2 1/4"	7/8"	53945A24	00000
				7/64"	2 1/2"	2 3/8"	15/16"	53945A25	00000
				1/8"	2 11/16"	2 9/16"	1 1/16"	53945A26	00000
				9/64"	2 15/16"	2 3/4"	1 3/16"	53945A27	00000
				5/32"	3 3/16"	3"	1 5/16"	53945A28	00000
				3/16"	3 1/2"	3 5/16"	1 1/2"	53945A29	00000
				7/32"	3 7/8"	3 5/8"	1 11/16"	53945A31	00000
				1/4"	4 1/4"	4"	1 15/16"	53945A32	00000
				5/16"	4 13/16"	4 1/2"	2 3/16"	53945A33	00000
				3/8"	5 5/16"	4 15/16"	2 1/2"	53945A34	000000
				1.5 mm	2"	1 15/16"	5/8"	53945A41	00000
				2 mm	2 3/16"	2 1/16"	3/4"	53945A42	00000
				2.5 mm	2 5/16"	2 3/16"	13/16"	53945A43	00000
				3 mm	2 1/2"	2 3/8"	15/16"	53945A44	00000
				4 mm	2 11/16"	2 1/2"	1 1/16"	53945A45	00000
				5 mm	3"	2 3/4"	1 1/4"	53945A46	00000
				6 mm	3 3/8"	3 1/8"	1 7/16"	53945A47	00000
				8 mm	4 1/4"	3 7/8"	1 15/16"	53945A48	00000
				10 mm	5 5/16"	4 7/8"	2 1/2"	53945A49	000000

Screw-Holding Easy-Align Ball-Tip L-Key Sets


	Ball Detent

Turn a variety of screws in hard-to-reach places with just one hand. The ball tip has a detent that grips screws securely to prevent them from falling off as you fasten. The ball tip also engages the drive at an angle to squeeze into tight spots.

	Material	Screw-Holding Mechanism	Container Type		Each
Hex





	Long Length
	9	1.5 mm Hex L-Key (3 1/8" O'all Lg.) 2 mm Hex L-Key (3 1/4" O'all Lg.) 2.5 mm Hex L-Key (3 5/8" O'all Lg.) 3 mm Hex L-Key (4" O'all Lg.) 4 mm Hex L-Key (4 1/2" O'all Lg.) 5 mm Hex L-Key (4 7/8" O'all Lg.) 6 mm Hex L-Key (6 1/4" O'all Lg.) 8 mm Hex L-Key (6 3/8" O'all Lg.) 10 mm Hex L-Key (7 1/8" O'all Lg.)	25°	Black Phosphate-Coated Steel	Ball Detent	Plastic Caddy	6450A6	000000
	13	0.050" Hex L-Key (2 7/8" O'all Lg.) 1/16" Hex L-Key (3 1/8" O'all Lg.) 1/4" Hex L-Key (5 7/8" O'all Lg.) 1/8" Hex L-Key (3 7/8" O'all Lg.) 3/16" Hex L-Key (4 3/4" O'all Lg.) 3/32" Hex L-Key (3 1/2" O'all Lg.) 3/8" Hex L-Key (7 1/8" O'all Lg.) 5/16" Hex L-Key (6 3/8" O'all Lg.) 5/32" Hex L-Key (4 3/8" O'all Lg.) 5/64" Hex L-Key (3 1/4" O'all Lg.) 7/32" Hex L-Key (5 1/8" O'all Lg.) 7/64" Hex L-Key (3 3/4" O'all Lg.) 9/64" Hex L-Key (4 1/8" O'all Lg.)	25°	Black Phosphate-Coated Steel	Ball Detent	Plastic Caddy	6450A7	00000

Color-Coded Easy-Align Ball-Tip L-Keys

Image of Attribute. Front orientation. Contains Annotated, Border. Easy Align, Ball Tip, L-Key, Sold Individually.

Quickly identify the size you need and start cranking. These L-keys are color-coded by drive size to take the guesswork out of selecting the right one. A ball tip on the long leg engages the drive with less contact than a straight tip, so you can turn screws at an angle instead of head on. Ball tips are handy for corners and tightly-packed areas, however, they don't grip as tightly as straight tips and may strip threads if you crank them too hard.

		Length
	Drive Size	Overall	Long Leg	Short Leg	Max. Access Angle	Color		Each
Hex





				Painted Steel
				0.050"	2 7/8"	2 7/8"	9/16"	25°	Red	2617N11	00000
				1/16"	3 1/8"	3"	9/16"	25°	Yellow	2617N12	0000
				5/64"	3 3/8"	3 3/16"	5/8"	25°	Black	2617N13	0000
				3/32"	3 1/2"	3 7/16"	11/16"	25°	Dark Green	2617N14	0000
				7/64"	3 3/4"	3 5/8"	11/16"	25°	Orange	2617N15	0000
				1/8"	4"	3 7/8"	3/4"	25°	Pink	2617N16	0000
				9/64"	4 1/4"	4"	13/16"	25°	Dark Blue	2617N17	0000
				5/32"	4 3/8"	4 3/16"	7/8"	25°	Red	2617N18	0000
				3/16"	4 3/4"	4 1/2"	15/16"	25°	Blue	2617N19	0000
				7/32"	5 1/8"	5"	1 1/16"	25°	Dark Yellow	2617N21	0000
				1/4"	5 7/8"	5 5/8"	1 1/8"	25°	Green	2617N22	0000
				5/16"	6 3/8"	6"	1 1/4"	25°	Brown	2617N23	0000
				3/8"	7 1/4"	6 7/8"	1 3/8"	25°	Dark Blue	2617N24	00000
				1.5 mm	3 5/8"	3 1/2"	9/16"	25°	Yellow	2617N25	0000
				2 mm	4"	4"	5/8"	25°	Black	2617N26	0000
				2.5 mm	4 1/2"	4 7/16"	11/16"	25°	Orange	2617N27	0000
				3 mm	5 1/8"	5"	3/4"	25°	Pink	2617N28	0000
				4 mm	5 3/4"	5 5/8"	7/8"	25°	Red	2617N29	0000
				5 mm	6 1/2"	6 5/16"	1 1/16"	25°	Blue	2617N31	0000
				6 mm	7 1/8"	6 7/8"	1 1/4"	25°	Green	2617N32	0000
				8 mm	8 1/4"	7 3/4"	1 3/8"	25°	Brown	2617N33	0000
				10 mm	9"	8 1/2"	1 9/16"	25°	Dark Blue	2617N34	00000

Screw-Holding Easy-Align Ball-Tip L-Keys

Ball Detent

Image of Attribute. Front orientation. Contains Annotated, Border. L-Key, Ball Tip, Sold Individually, Easy Align.

Turn screws in hard-to-reach places with just one hand. The ball tip has a detent that grips screws securely to prevent them from falling off as you fasten. The ball tip also engages the drive at an angle to squeeze into tight spots.

		Length
	Drive Size	Overall	Long Leg	Short Leg	Max. Access Angle	Screw-Holding Mechanism		Each
Hex





				Black Phosphate-Coated Steel
				0.050"	2 7/8"	2 13/16"	1/2"	25°	Ball Detent	6450A59	00000
				1/16"	3 1/8"	3"	9/16"	25°	Ball Detent	6450A61	0000
				5/64"	3 1/4"	3 3/16"	5/8"	25°	Ball Detent	6450A62	0000
				3/32"	3 1/2"	3 3/8"	5/8"	25°	Ball Detent	6450A63	0000
				7/64"	3 3/4"	3 5/8"	11/16"	25°	Ball Detent	6450A64	0000
				1/8"	3 7/8"	3 13/16"	3/4"	25°	Ball Detent	6450A51	0000
				9/64"	4 1/8"	4"	13/16"	25°	Ball Detent	6450A52	0000
				5/32"	4 3/8"	4 3/16"	13/16"	25°	Ball Detent	6450A53	0000
				3/16"	4 3/4"	4 1/2"	15/16"	25°	Ball Detent	6450A54	0000
				7/32"	5 1/8"	4 7/8"	1"	25°	Ball Detent	6450A55	0000
				1/4"	5 7/8"	5 5/8"	1 1/8"	25°	Ball Detent	6450A56	0000
				5/16"	6 3/8"	6"	1 1/4"	25°	Ball Detent	6450A57	0000
				3/8"	7 1/8"	6 13/16"	1 3/8"	25°	Ball Detent	6450A58	0000
				1.27 mm	2 7/8"	2 13/16"	1/2"	25°	Ball Detent	6450A65	0000
				1.5 mm	3 1/8"	3"	1/2"	25°	Ball Detent	6450A66	0000
				2 mm	3 1/4"	3 3/16"	5/8"	25°	Ball Detent	6450A67	0000
				2.5 mm	3 5/8"	3 1/2"	11/16"	25°	Ball Detent	6450A68	0000
				3 mm	4"	3 7/8"	3/4"	25°	Ball Detent	6450A24	0000
				4 mm	4 1/2"	4 5/16"	7/8"	25°	Ball Detent	6450A25	0000
				5 mm	4 7/8"	4 11/16"	1 1/16"	25°	Ball Detent	6450A26	0000
				6 mm	5 3/4"	5 1/2"	1 1/4"	25°	Ball Detent	6450A27	0000
				8 mm	6 1/4"	6"	1 3/8"	25°	Ball Detent	6450A28	0000
				10 mm	7 1/8"	6 11/16"	1 9/16"	25°	Ball Detent	6450A29	0000

Tight-Clearance Flexible L-Key Sets

Bend these L-keys around obstacles to access a variety of screws in hard-to-reach places. The tip flexes into spots where a rigid key might not fit, however it may start to wobble if you crank too hard.

Steel—Steel is strong and wear resistant, however it's best for dry environments since moisture will cause it to rust.

	Container Type		Each
Hex





	Long Length
	7	1/8" Hex L-Key (4 7/16" O'all Lg.) 3/16" Hex L-Key (5 7/16" O'all Lg.) 3/32" Hex L-Key (4 3/16" O'all Lg.) 5/32" Hex L-Key (4 15/16" O'all Lg.) 7/32" Hex L-Key (5 9/16" O'all Lg.) 7/64" Hex L-Key (4 3/16" O'all Lg.) 9/64" Hex L-Key (4 11/16" O'all Lg.)	Steel	Plastic Pouch	7153A11	000000

Nonsparking L-Key Sets

Made of beryllium copper that is Factory Mutual (FM) approved, these L-key sets won't create sparks when scraped, struck, or dropped. They help you meet OSHA requirements when fastening screws in hazardous environments where flammable liquid, dust, or gas could be lurking. Use them everywhere from oil and gas refineries to paper mills.

Warning: Do not use these tools in direct contact with acetylene.

	Container Type	Specifications Met		Each
Hex





	Short Length
	10	1/16" Hex L-Key (1 13/16" O'all Lg.) 1/4" Hex L-Key (3 9/16" O'all Lg.) 1/8" Hex L-Key (2 7/16" O'all Lg.) 3/16" Hex L-Key (3 1/16" O'all Lg.) 3/32" Hex L-Key (2" O'all Lg.) 3/8" Hex L-Key (4 11/16" O'all Lg.) 5/16" Hex L-Key (4 1/16" O'all Lg.) 5/32" Hex L-Key (2 11/16" O'all Lg.) 5/64" Hex L-Key (2" O'all Lg.) 7/32" Hex L-Key (3 3/8" O'all Lg.)	Beryllium Copper	Canvas Pouch	FM Approved	6522A41	0000000

Tight-Clearance Flexible L-Keys

A flexible spring at the tip bends around obstacles to access screws in hard-to-reach places. These L-keys slip into compact machinery where a rigid tool wouldn't fit, however, they may wobble if you crank them too hard.

Steel—Steel is strong and wear resistant, however it's best for dry environments since moisture will cause it to rust.

		Length
	Drive Size	Overall	Long Leg	Short Leg		Each
Hex





				Steel
				3/32"	4 3/16"	4 1/8"	9/16"	7153A21	000000
				7/64"	4 3/16"	4 1/16"	5/8"	7153A22	00000
				1/8"	4 7/16"	4 5/16"	11/16"	7153A23	00000
				9/64"	4 11/16"	4 9/16"	3/4"	7153A24	00000
				5/32"	4 15/16"	4 13/16"	3/4"	7153A25	00000
				3/16"	5 7/16"	5 1/4"	7/8"	7153A26	00000
				7/32"	5 9/16"	5 3/8"	15/16"	7153A27	00000

Nonsparking L-Keys

Made of beryllium copper that is Factory Mutual (FM) approved, these L-keys won't create sparks when scraped, struck, or dropped. They help you meet OSHA requirements when fastening screws in hazardous environments where flammable liquid, dust, or gas could be lurking. Use them everywhere from oil and gas refineries to paper mills.

Warning: Do not use these tools in direct contact with acetylene.

		Length
	Drive Size	Overall	Long Leg	Short Leg	Specifications Met		Each
Hex





				Beryllium Copper
				1/16"	1 13/16"	1 3/4"	1/2"	FM Approved	6522A11	00000
				5/64"	2"	1 7/8"	3/4"	FM Approved	6522A12	00000
				3/32"	2"	1 7/8"	3/4"	FM Approved	6522A13	00000
				1/8"	2 7/16"	2 5/16"	13/16"	FM Approved	6522A14	00000
				5/32"	2 11/16"	2 1/2"	7/8"	FM Approved	6522A15	00000
				3/16"	3 1/16"	2 7/8"	7/8"	FM Approved	6522A16	00000
				7/32"	3 3/8"	3 1/8"	1 1/16"	FM Approved	6522A17	00000
				1/4"	3 9/16"	3 5/16"	1 1/16"	FM Approved	6522A18	00000
				5/16"	4 1/16"	3 3/4"	1 3/8"	FM Approved	6522A31	00000
				3/8"	4 11/16"	4 5/16"	1 7/16"	FM Approved	6522A21	00000
				1/2"	5 3/4"	5 1/4"	1 3/4"	FM Approved	6522A23	00000
				3/4"	8"	7 1/4"	2 1/4"	FM Approved	6522A27	000000
				1.5 mm	2 9/16"	2 1/2"	13/16"	FM Approved, DIN 911	6522A51	0000
				2 mm	2 5/8"	2 1/2"	13/16"	FM Approved, DIN 911	6522A52	00000
				2.5 mm	2 5/8"	2 1/2"	13/16"	FM Approved, DIN 911	6522A53	00000
				3 mm	2 5/8"	2 1/2"	13/16"	FM Approved, DIN 911	6522A54	00000
				4 mm	2 15/16"	2 13/16"	1"	FM Approved, DIN 911	6522A56	00000
				5 mm	3 5/16"	3 1/8"	1 1/8"	FM Approved, DIN 911	6522A57	00000
				6 mm	3 13/16"	3 9/16"	1 5/16"	FM Approved, DIN 911	6522A58	00000
				8 mm	4 5/16"	3 15/16"	1 7/16"	FM Approved, DIN 911	6522A59	00000

Screw-Holding L-Key Sets


	Retaining Ring

When you've only got one free hand to fasten, reach for these L-key sets. A retaining ring on the tip grips screws securely so they won't fall off as you tighten. They're useful when working above crevices that screws could slip into.

Black-Oxide Steel—Offer slightly better corrosion resistance than plain steel L-keys to stand up to occasional moisture.

	Screw-Holding Mechanism	Container Type		Each
Torx





	Long Length
	7	T6 Torx L-Key (3 1/4" O'all Lg.) T7 Torx L-Key (3 9/16" O'all Lg.) T8 Torx L-Key (4 1/16" O'all Lg.) T9 Torx L-Key (4 7/16" O'all Lg.) T10 Torx L-Key (4 13/16" O'all Lg.) T15 Torx L-Key (5 7/16" O'all Lg.) T20 Torx L-Key (5 7/8" O'all Lg.)	Black-Oxide Steel	Retaining Ring	Plastic Caddy	7904A23	000000
	10	T6 Torx L-Key (3 1/4" O'all Lg.) T7 Torx L-Key (3 9/16" O'all Lg.) T8 Torx L-Key (4 1/16" O'all Lg.) T9 Torx L-Key (4 7/16" O'all Lg.) T10 Torx L-Key (4 13/16" O'all Lg.) T15 Torx L-Key (5 7/16" O'all Lg.) T20 Torx L-Key (5 7/8" O'all Lg.) T25 Torx L-Key (6 7/16" O'all Lg.) T27 Torx L-Key (7" O'all Lg.) T30 Torx L-Key (7 9/16" O'all Lg.)	Black-Oxide Steel	Retaining Ring	Plastic Caddy	7904A24	00000

Screw-Holding L-Keys

Retaining

Ring

When you've only got one free hand to fasten, reach for these L-keys. A retaining ring on the tip grips screws securely so they won't fall off as you tighten. They're useful when working above crevices that screws could slip into.

Black-Oxide Steel—Offer slightly better corrosion resistance than plain steel L-keys to stand up to occasional moisture.

		Length
	Drive Size	Overall	Long Leg	Short Leg	Screw-Holding Mechanism		Each
Torx





				Black-Oxide Steel
				T6	3 1/4"	3 1/8"	9/16"	Retaining Ring	7943A11	00000
				T7	3 9/16"	3 7/16"	11/16"	Retaining Ring	7943A12	0000
				T8	4 1/16"	3 15/16"	3/4"	Retaining Ring	7943A13	0000
				T9	4 7/16"	4 5/16"	3/4"	Retaining Ring	7943A14	0000
				T10	4 13/16"	4 11/16"	7/8"	Retaining Ring	7943A15	0000
				T15	5 7/16"	5 1/4"	7/8"	Retaining Ring	7943A16	0000
				T20	5 7/8"	5 11/16"	1"	Retaining Ring	7943A17	0000
				T25	6 7/16"	6 1/4"	1 1/8"	Retaining Ring	7943A18	0000
				T27	7"	6 3/4"	1 1/4"	Retaining Ring	7943A19	0000
				T30	7 9/16"	7 5/16"	1 5/16"	Retaining Ring	7943A21	0000