Drive and secure these threaded rods on both ends with the included nuts. They’re Grade B7, so their tensile strength is about one and half times higher than low-strength steel rods.

About half the strength of medium-strength steel coupling nuts, these nuts are for light duty fastening applications.

The left-hand threads on these coupling nuts resists loosening from counterclockwise vibration. Use in light duty applications.

These metric-sized coupling nuts are Class 10 steel, so they’re about 25% stronger than medium-strength steel coupling nuts.

Choose these locknuts to fasten standard metric threads. They’re Class 8 steel, so they can be used in most fastening applications.

These coupling nuts have good chemical resistance.

More corrosion resistant than 18-8 stainless steel coupling nuts, these nuts have excellent resistance to chemicals and salt water.

One-third the weight of steel, aluminum coupling nuts resist corrosion in wet environments.

Brass coupling nuts are corrosion resistant in wet environments and electrically conductive.

Known for their strength, steel coupling nuts are available with a corrosion-resistant finish.

Connect two differently sized male-threaded parts, such as threaded rods, and tighten with a standard wrench.

Adapt threaded rods from inch to metric. These adapters connect two male-threaded fasteners, so you can change the gender of a mating part or increase or decrease its thread size. The hex-shaped body fits into the head of a standard wrench.

Found in hand-powered clamps, vises, grates, doors, and work tables, lead screws and nuts have broad, square threads that are well suited for quick assembly, high clamping forces, and lifting and lowering heavy objects.

Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension. Add right- and left-hand threaded rod ends to build your linkages.