We will reply to your message within an hour.
More
Rated MERV 13, these filters capture particles down to 0.3 microns.
Rated MERV 11, these filters capture particles down to 1 micron.
With tight pleats, these filters have a larger surface area than filters with standard pleats for improved efficiency and an even longer life. These filters strike a good balance of filtering efficiently while allowing airflow, making them a more cost-effective option than higher rated filters.
Clear the air of fine particles and odors caused by high levels of pollution, such as wildfire smoke.
Control dust and contaminants in hospitals, laboratories, and other demanding environments. These filters capture particles down to 0.3 microns.
Multiple panels maximize filtering surface area for long service life.
Extend the time between filter changes in laboratories, hospitals, and other places with a high risk of airborne contaminants.
Purify the air in your most sensitive environments. These filters remove 99.999% of dust and other particles, so they're best in areas where high air purity matters, such as semiconductor, pharmaceutical, and aerospace facilities.
Stop dust and other contaminants from entering your process and equipment. Use these filters on blowers, compressors, engines, and in hydraulic systems.
Clean the air going into small blowers and air-powered equipment in tight spaces.
Made of polypropylene, these filters can be used in damp environments where corrosion is a concern.
With a threaded connection on both ends, these filters can be installed anywhere in your pipeline to keep dust and debris out of your system.
Typically used on vacuum pumps, these filters ensure that clean air is going in and coming out of your system.
Install these filters between your high-vacuum chamber and the inlet of your pump to remove dust, water vapor, and other contaminants from the system and protect the pump. Commonly used in vacuum-furnace and coating applications, they have a polyester filter element that traps particles as small as 5 microns.
Clamp these exhaust filters onto oil-sealed, high-vacuum pumps to remove oil, smoke, and other contaminants and keep workplace air clean. Once captured, the oil returns to the pump to be reused.
To keep airborne oil and odor out of your work environment, connect these filters to your high-vacuum oil pump. They purify pump exhaust in two stages: a fiberglass layer captures oil and collects it into a drain, and an active carbon layer removes any odor-causing oil or chemical vapors.
Stop oil mist and smoke from exiting your equipment and into your environment. These exhaust filters are commonly used with small oil-sealed vacuum pumps.
Purify exhaust fumes while silencing the noise from your oil-free high-vacuum pumps.
Remove contaminants, moisture, and other particles from steam that will touch food and for final filtering in pharmaceutical, biotech, and electronics applications.
Remove contaminants from culinary steam—steam that sanitizes food and beverage processing equipment—with these corrosion-resistant filter housings.
Separators remove 99% of particles from air, gas, and steam lines and have no filter cartridges or baskets to clean and replace.
When you need to replace your dust collector’s bag or cartridge, match up the specs to one that we have.
Mount these powerful units on a drum for two-stage collection. In the first stage, larger particles fall into the drum; in the second stage, smaller particles go into the filter bag, resulting in less wear on the blower and filter bag. These collectors are 99% efficient for particles 10 microns and larger.
Generate clean air for instrumentation and applications with critical air requirements.
Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.
Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.
Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.
The most efficient spray booth filters we offer, these filters are made of polyester for moisture resistance.